Outer CV joints for BMW X4

Find the right outer CV joint for your BMW X4, whether you drive an SUV or off-roader. Our range covers a broad selection of model years from 2014 onwards, including diesel, petrol and...

Choose version

Choose a version to refine the results and get closer to the right product.

Products for Outer CV joints for BMW X4

54 products
1 - 24 of 54
Item no.:0507327
  • Position: Outer
  • Seal diameter: 65 mm
  • Inner splines: 33
  • Outer splines: 37
Item no.:653169
  • Position: Rear, Outer
  • Total length: 135 mm
  • Splines gearbox side: 30
  • Splines wheel side: 25
Item no.:0588146
  • Position: Outer
  • Seal diameter: 65 mm
  • Inner splines: 33
  • Outer splines: 37
  • Joint diameter: 74,5 mm
Item no.:0532662
  • Position: Outer
  • Seal diameter: 65 mm
  • Inner splines: 33
  • Outer splines: 37
Item no.:656667
  • Position: Rear, Outer
  • Total length: 135 mm
  • Splines gearbox side: 30
  • Splines wheel side: 25
Item no.:0564293
  • Position: Outer
  • Seal diameter: 65 mm
  • Inner splines: 33
  • Outer splines: 37
  • Joint diameter: 74,5 mm
Item no.:0562659
  • Position: Outer
  • Seal diameter: 65 mm
  • Inner splines: 33
  • Outer splines: 37
Item no.:658422
  • Position: Rear, Outer
  • Total length: 135 mm
  • Splines gearbox side: 30
  • Splines wheel side: 25
Item no.:0582028
  • Position: Outer
  • Seal diameter: 65 mm
  • Inner splines: 33
  • Outer splines: 37
  • Joint diameter: 74,5 mm
Item no.:0598919
  • Position: Outer
  • Seal diameter: 65 mm
  • Inner splines: 33
  • Outer splines: 37
Item no.:655235
  • Position: Rear, Outer
  • Total length: 135 mm
  • Splines gearbox side: 30
  • Splines wheel side: 25
Item no.:0558408
  • Position: Outer
  • Seal diameter: 65 mm
  • Inner splines: 33
  • Outer splines: 37
  • Joint diameter: 74,5 mm
Item no.:0508030
  • Position: Outer
  • Seal diameter: 65 mm
  • Inner splines: 33
  • Outer splines: 37
Item no.:657955
  • Position: Rear, Outer
  • Total length: 135 mm
  • Splines gearbox side: 30
  • Splines wheel side: 25
Item no.:0531952
  • Position: Outer
  • Seal diameter: 65 mm
  • Inner splines: 33
  • Outer splines: 37
  • Joint diameter: 74,5 mm
Item no.:0505199
  • Position: Outer
  • Seal diameter: 65 mm
  • Inner splines: 33
  • Outer splines: 37
Item no.:656573
  • Position: Rear, Outer
  • Total length: 135 mm
  • Splines gearbox side: 30
  • Splines wheel side: 25
Item no.:0591985
  • Position: Outer
  • Seal diameter: 65 mm
  • Inner splines: 33
  • Outer splines: 37
  • Joint diameter: 74,5 mm
Item no.:0502940
  • Position: Outer
  • Seal diameter: 65 mm
  • Inner splines: 33
  • Outer splines: 37
Item no.:0531218
  • Position: Outer
  • Seal diameter: 65 mm
  • Inner splines: 33
  • Outer splines: 37
  • Joint diameter: 74,5 mm
Item no.:356975
  • Position: Outer
  • Seal diameter: 65 mm
  • Inner splines: 33
  • Outer splines: 37
  • Joint diameter: 86 mm
Item no.:0518142
  • Position: Outer
  • Seal diameter: 65 mm
  • Inner splines: 33
  • Outer splines: 37
  • Joint diameter: 74,5 mm
Item no.:352581
  • Position: Outer
  • Seal diameter: 65 mm
  • Inner splines: 33
  • Outer splines: 37
  • Joint diameter: 86 mm
Item no.:0529905
  • Position: Outer
  • Seal diameter: 65 mm
  • Inner splines: 33
  • Outer splines: 37
  • Joint diameter: 74,5 mm
Showing 1–24 of 54 products

Outer CV joints for BMW X4

The BMW X4 combines sporty elegance with powerful drivetrain engineering, frequently paired with the intelligent xDrive all-wheel drive system. To transfer this power to the wheels efficiently, premium-quality components are essential. The outer CV joint is a crucial link in this setup. At CVJoint24, you will find a broad selection of outer CV joints engineered specifically to withstand the demands placed on a BMW X4. Whether you drive a petrol, diesel or hybrid model, selecting the right CV joint is vital to preserving the car’s dynamic handling and stability during acceleration and cornering.

What does an outer CV joint do on a BMW X4?

The primary function of the outer CV joint is to transmit torque from the drive shaft to the front wheels (or rear wheels, depending on the drivetrain configuration) while allowing the wheels to steer and accommodate suspension movement. On a BMW X4, which typically features an active driving profile, the joint must handle large operating angles and heavy loads without loss of efficiency. It works as a flexible coupling that ensures constant velocity regardless of road irregularities or steering input. Without a properly functioning outer constant velocity joint, power delivery becomes jerky and manoeuvrability deteriorates significantly, directly compromising safety and driving dynamics.

Common signs of wear

The most frequent symptom of a worn outer CV joint on a BMW X4 is a clicking or knocking noise when turning sharply at low speeds, such as during parking manoeuvres. This noise is typically caused by lubricant leaking out due to a torn CV boot, allowing grit and road grime to enter and cause mechanical wear to the internal ball bearings and raceways. Other tell-tale signs include steering wheel vibrations under acceleration or grease splattered on the inside of the wheel rim. If these symptoms are ignored, the joint can suffer catastrophic failure, leaving the vehicle stranded with no drive to that wheel.

How to choose the correct outer CV joint

Selecting the correct part for a BMW X4 requires care, as configurations vary depending on engine variant, model year and whether the car has xDrive. The most effective way to ensure an exact fit is to filter by selecting your vehicle’s make, model and engine. This narrows down the range to display only the outer CV joints that are technically compatible with your car. For total accuracy, you can also check specifications such as the internal and external spline count. We always recommend choosing a joint that matches original equipment specifications to guarantee a long service life and hassle-free fitment to your BMW X4 drive shaft.

Related parts to inspect

We recommend checking these exact pages for the same vehicle when working on the outer CV joint:

When one drivetrain component shows signs of wear, related parts on the vehicle often require inspection as well. Comparing these exact pages for the BMW X4 makes it easier to determine whether an issue lies with the outer CV joint itself or another adjacent part of the power transmission.

This is especially true for models where vibrations, play and unusual noises can transfer symptoms across several driveline components. Checking related categories reduces the risk of replacing one correct part while overlooking an adjacent component that causes the same underlying fault.

By inspecting the entire drivetrain, you ensure that your BMW X4 remains dependable for miles to come.

Why shop at CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, giving us unique, in-depth technical expertise in every part we supply. We understand the exacting engineering standards demanded by premium vehicles like the BMW X4 and offer only high-quality replacement parts. Backed by our extensive warehouse stock and focus on precise fitment, we provide dependable purchases and prompt dispatch across the EU. Our customer service team has vast experience in automotive drivetrains and is on hand to help you find the right solution. When you buy from us, you get premium car parts backed by specialist knowledge to keep your vehicle running at its best on European roads.

Frequently Asked Questions about outer CV joints for BMW X4

How do I know if the outer CV joint on my BMW X4 is failing?

The most common symptom is a clicking or knocking noise when turning sharply at low speeds. You might also notice vibrations during acceleration or see grease splattered on the inside of the wheel if the CV boot has split.

Can I replace just the outer CV joint, or do I need to replace the entire drive shaft?

On most BMW X4 models, you can easily replace just the outer CV joint if the rest of the drive shaft is in good condition. This is often a far more cost-effective option than fitting a complete shaft.

Why do CV joints fail on the BMW X4?

The most frequent cause is a split or torn CV boot. Once grease leaks out and dirt or moisture penetrates the joint, the internal precision components wear out rapidly, leading to noise and mechanical failure.

Do all outer CV joints fit every BMW X4 model?

No, specifications differ depending on the engine, gearbox and whether the vehicle features xDrive. Always select your car's make, model and engine to find the exact replacement part for your vehicle.

Are the CV boot and grease included when I buy an outer CV joint from you?

Yes, our outer CV joints are supplied as complete kits that include the joint itself, a new CV boot, high-grade joint grease, as well as the necessary clamps and fitting hardware.

Do I need a wheel alignment after replacing a CV joint?

Normally, a wheel alignment is not required after replacing an outer CV joint on a BMW X4, provided no suspension components affecting the steering geometry were loosened or removed during the repair.