Outer CV joints for Fiat

Discover our wide selection of outer CV joints engineered for an extensive range of Fiat models, from agile city runabouts to hard-working commercial vans and four-wheel-drive vehicles....

Choose model

Choose a model to move to more precise products and the next step in the vehicle tree.

Products for Outer CV joints for Fiat

426 products
241 - 264 of 426
Item no.:3567306
  • Position: Outer
  • Inner splines: 45
  • Seal diameter: 70 mm
  • Outer splines: 35
  • ABS teeth: 54
Item no.:3584625
  • Position: Outer
  • Inner splines: 45
  • Seal diameter: 70 mm
  • Outer splines: 35
  • Thread size: M33X1,5
Item no.:0519148
  • Position: Outer
  • Inner splines: 20
  • Seal diameter: 47 mm
  • Outer splines: 22
  • Thread size: M22X1,5
Item no.:3523313
  • Position: Outer
  • Inner splines: 26
  • Seal diameter: 59 mm
  • Outer splines: 27
  • Thread size: M24X1,5
Item no.:0500641
  • Position: Outer
  • Inner splines: 25
  • Seal diameter: 52 mm
  • Outer splines: 25
  • Thread size: M24X1,5
Item no.:351291
  • Position: Outer
  • Inner splines: 24
  • Splines wheel side: 25
  • Outer diameter: 85,7 mm
  • Thread size: M24X1,5
Item no.:0524186
  • Position: Outer
  • Inner splines: 24
  • Seal diameter: 51 mm
  • Outer splines: 25
  • Thread size: M24X1,5
Item no.:0546393
  • Position: Outer
  • Inner splines: 25
  • Seal diameter: 52 mm
  • Outer splines: 25
  • ABS teeth: 44
Item no.:0510600
  • Position: Outer
  • Inner splines: 22
  • Seal diameter: 51 mm
  • Outer splines: 25
  • Thread size: M24X1,5
Item no.:0533324
  • Position: Front, Outer
  • Inner splines: 26
  • Seal diameter: 51 mm
  • Outer splines: 25
  • Thread size: M28X1,5
Item no.:0504454
  • Position: Outer
  • Inner splines: 20
  • Splines wheel side: 22
  • Seal diameter: 46 mm
  • ABS teeth: 44
Item no.:358842
  • Position: Outer
  • Inner splines: 20
  • Seal diameter: 46 mm
  • Outer splines: 22
  • Thread size: M22X1,5
Item no.:0519282
  • Position: Outer
  • Inner splines: 20
  • Splines wheel side: 20
  • Seal diameter: 43 mm
  • Outer diameter: 81 mm
Item no.:256456
  • Position: Outer
  • Inner splines: 36
  • Splines wheel side: 28
  • Total length: 154 mm
  • ABS teeth: 36
Item no.:359691
  • Position: Outer
  • Inner splines: 39
  • Seal diameter: 59 mm
  • Outer splines: 27
  • ABS teeth: 48
Item no.:3599778
  • Position: Outer
  • Inner splines: 27
  • Seal diameter: 59 mm
  • Outer splines: 27
  • Thread size: M24X1,5
Item no.:7299848
  • Position: Front, Outer
  • Inner splines: 25
  • Seal diameter: 59 mm
  • Outer splines: 25
  • ABS teeth: 44
Item no.:358403
  • Position: Outer
  • Inner splines: 27
  • Seal diameter: 63 mm
  • Outer splines: 28
  • Thread size: M22X1,5
Item no.:3596042
  • Position: Outer
  • Inner splines: 22
  • Seal diameter: 51 mm
  • Outer splines: 25
  • Thread size: M24X1,5
Item no.:3532406
  • Position: Outer
  • Inner splines: 22
  • Seal diameter: 52 mm
  • Outer splines: 25
  • Thread size: M24X1,5
Item no.:157602
  • Position: Outer
  • Inner splines: 22
  • Seal diameter: 51 mm
  • Outer splines: 22
  • Thread size: M22X1,5
Item no.:355614
  • Position: Outer
  • Inner splines: 25
  • Seal diameter: 48 mm
  • Outer splines: 22
  • Thread size: M24X2
Item no.:7314296
  • Position: Front, Outer
  • Inner splines: 34
  • Seal diameter: 59 mm
  • Outer splines: 27
  • ABS teeth: 48
Item no.:0571452
  • Position: Front, Outer
  • Inner splines: 34
  • Seal diameter: 58 mm
  • Outer splines: 28
  • Thread size: M24X1,5
Showing 241–264 of 426 products

Outer CV joints for Fiat

The outer CV joint is an essential component of your Fiat's drivetrain. Located at the outermost end of the drive shaft, closest to the wheel, its main job is to transfer torque from the gearbox to the wheels whilst allowing the front wheels to steer and travel with the suspension. For Fiat owners, it is vital to remember that this component is subjected to severe stresses, especially in stop-start city traffic with frequent tight turns or under heavy loads in commercial vans. A high-quality component ensures power is delivered smoothly without vibrations, enhancing both driving comfort and safety.

At CVJoint24, you will find parts that meet or exceed original equipment specifications, which is crucial for maintaining your car's performance over time. We specialise specifically in these driveline parts to provide the expert knowledge required when a replacement is due. Choosing the right part minimises the risk of consequential damage to other drivetrain components and ensures your Fiat remains reliable for many kilometres to come.

How outer CV joints differ between Fiat models

Fiat produces a remarkably broad range of vehicles, which means the technical specifications for an outer constant velocity joint vary considerably across models. An outer CV joint for a Fiat Punto is much smaller and lighter than the equivalent component on a heavily laden Fiat Ducato. The primary differences lie in the number of splines on both the inner and outer shafts, the seal diameter, and whether the joint features an integrated ABS ring. On modern models, the ABS signal is often read via an active magnetic bearing, whereas older models typically feature a physical reluctor ring pressed directly onto the CV joint.

The choice of materials in an outer CV joint for Fiat is equally decisive. We supply components manufactured from high-grade steel that undergo precision induction hardening to maximise the wear resistance of the internal ball tracks. This is particularly vital for high-torque Fiat models, such as the modern turbo-diesel variants in the Ducato lineup. Cheaper generic CV joints may look identical on the surface, but inferior hardening depth and steel quality quickly show through premature wear. Selecting a model-specific part from our range ensures your Fiat retains its factory reliability and transfers power with zero energy loss.

Common symptoms of wear

The most classic symptom of a worn outer CV joint is a rhythmic clicking or knocking noise when turning, particularly whilst accelerating. This sound usually occurs because the internal steel balls and tracks within the joint have become pitted or worn. Another frequent symptom is vibration through the steering wheel that intensifies with road speed. It is also crucial to inspect the condition of your CV boots for Fiat on a regular basis. If a boot tears or splits, the lubricating grease escapes whilst road grit, moisture, and road salt penetrate the joint.

This dramatically accelerates wear and can cause catastrophic failure within a very short distance. If you spot grease splattered on the inside of the wheel rim or across the wheel arch, it is a clear warning that the boot is split and the constant velocity joint requires immediate inspection. Acting promptly often saves money, as you may only need to fit a replacement boot if the joint itself has not yet suffered wear. Ignoring these warning signs risks joint seizure, which in the worst cases can lock the wheel or cause the drive shaft to break free while driving.

How to select the right outer CV joint for your Fiat

Selecting the correct part for a Fiat can sometimes seem daunting given the numerous production variations. The most reliable method to identify the correct outer CV joint is to choose your car's make, model, and engine in our vehicle selector. This instantly narrows our range down to the exact parts engineered for your car. Alongside your model details, it is always wise to double-check key physical dimensions where possible: verify the external and internal spline counts, the seal diameter, and whether your current joint uses an ABS ring. For models such as the Fiat Bravo or Fiat Croma, multiple specifications can exist depending on the chassis number and build date.

When carrying out the replacement, using the correct grease is essential. All our outer CV joints are supplied complete with premium molybdenum disulphide (MoS2) grease, formulated to withstand the extreme surface pressures encountered within the joint. Always ensure the circlip or snap ring seats securely into the drive shaft groove during reassembly. If you are unsure about the procedure, consulting a qualified garage is recommended, though DIY mechanics with the right tools will find the job straightforward with our precision-fit parts. Investing in a quality outer CV joint safeguards your vehicle's reliability and your safety on the road, and we are here to make sure you get the right part first time.

Popular Fiat models

Select your Fiat model to view matching outer CV joints:

With such a diverse model range, selecting your specific car is the best way to proceed. Choosing your exact model takes you to a dedicated page detailing correct fitment, drivetrain specifications, and parts tailored to your car.

By picking your model from the list above, you will find a tailored catalogue focused on exact fitment and technical specifications. We continuously update our inventory to support the newest models and engine options, so you can always rely on us to supply the drivetrain parts you need for your Fiat, whether it is an older daily runner or a modern commercial vehicle.

Why buy from CVJoint24?

CVJoint24 is no ordinary online auto parts retailer. We are an international shop backed by a Swedish driveline specialist, focusing exclusively on drivetrain components. This gives us unmatched, in-depth knowledge of everything from ABS rings for Fiat to complete drive shafts and CV joints. When ordering from our central warehouse in Helsingborg, Sweden, you benefit from our precise vehicle matching, ensuring you receive parts engineered to fit your car seamlessly. We understand that a broken car needs fixing without delay, so we dispatch our stock quickly across the EU.

Our goal is to help you find the exact part on your first try and give you complete peace of mind with premium parts at competitive prices. With an extensive inventory for Fiat models and a knowledgeable customer service team, we are your trusted partner for driveline maintenance. We combine extensive warehouse stock with dedicated technical expertise, giving you the best support when repairing and maintaining your Fiat.

Frequently asked questions about outer CV joints for Fiat

How do I know if my Fiat needs a new outer CV joint?

The most common sign is a clicking noise when turning, particularly under acceleration. You may also notice steering wheel vibrations or spot grease splatters on the inside of the wheel if the CV boot has split.

Can I replace just the CV boot instead of the entire CV joint?

Yes, if you catch a split boot early before dirt and moisture have entered to damage the joint itself, replacing the CV boot and repacking it with fresh grease may be sufficient.

Do all Fiat CV joints fit all models?

No, CV joints vary significantly across Fiat models depending on the engine, gearbox and model year. Always select your vehicle make, model and engine to find the exact part you need.

What is included when I purchase an outer CV joint from you?

Our CV joint kits are normally supplied complete with the CV joint itself, a new boot, high-quality grease, a circlip and the necessary clamps for installation.

How does the fitment guarantee work for Fiat parts?

When you select your car's exact make, model and engine variant, we ensure the part matches your vehicle. In the unlikely event of any issue, our team is on hand to help you exchange it for the correct part without fuss.

Why is there a clicking sound when I turn in my Fiat?

The clicking noise occurs when the steel balls in the outer constant velocity joint move along worn or pitted tracks. This is a clear indicator that the joint is worn out and requires prompt replacement.