Outer CV joints for Honda Civic

Find the correct outer CV joint for your Honda Civic in our extensive catalogue. We cover a broad range of generations and body styles, from classic 1980s models such as the 1300 L to...

Products for Outer CV joints for Honda Civic

28 products
25 - 28 of 28
Item no.:654660
  • Position: Rear, Outer
  • Inner splines: 25
  • Seal diameter: 55 mm
  • Outer splines: 23
  • ABS teeth: 50
Item no.:356722
  • Position: Front, Outer
  • Inner splines: 24
  • Seal diameter: 63 mm
  • Outer splines: 28
  • Total length: 148 mm
Item no.:151428
  • Position: Outer
  • Inner splines: 28
  • Seal diameter: 58 mm
  • Outer splines: 26
  • Thread size: M22X1,5
Item no.:0568806
  • Position: Outer
  • Inner splines: 28
  • Seal diameter: 55 mm
  • Outer splines: 26
  • ABS teeth: 50
Showing 25–28 of 28 products

Outer CV joints for Honda Civic

Maintaining the drivetrain on a Honda Civic is essential to preserve the driving enjoyment and reliability for which this model is known. The outer CV joint is one of the most critical components in the car's driveline, positioned furthest out towards the wheel to transfer power from the gearbox to the wheels even while cornering. On a front-wheel-drive car like the Honda Civic, these parts are subjected to substantial loads, especially in city driving with frequent turns and acceleration. We offer several different variants of outer CV joints to cover everything from classic older generations to modern editions of this popular model.

When you choose a replacement part from us, you can rest assured that we understand the technical requirements of your car. A Honda Civic requires components manufactured to precise tolerances to prevent vibrations and premature wear. By focusing on quality-assured parts, we ensure your car stays safe on the road. Our range is carefully selected to match or exceed original specifications, which is vital for a lasting repair in challenging European climates where road salt and dirt quickly wear down protective driveline components.

What does an outer CV joint do on a Honda Civic?

The outer CV joint, or constant velocity joint, transfers torque from the drive shaft to the front wheels at a constant rotational speed, irrespective of steering angle. On a Honda Civic, this means the joint must cope with both vertical suspension travel and the wide articulation angles required during steering. Without a properly functioning outer constant velocity joint, power delivery would become jerky, and the car could ultimately become completely undriveable. It is a precision-engineered component comprising internal ball bearings, a cage, and an outer housing, all lubricated with specialised high-pressure grease to minimise friction.

Because the Honda Civic is designed with an emphasis on efficiency and compact dimensions, the CV joints are engineered to deliver maximum strength relative to their weight. The outer joint is the hardest-working part of the drivetrain as it constantly changes angle whilst driving. Understanding its function helps you act promptly at the first symptom of wear. A sound joint ensures smooth propulsion whilst maintaining vehicle stability and handling safety during sharp manoeuvres.

Common signs of wear

The most common symptom of a worn outer CV joint on a Honda Civic is a distinctive clicking or knocking noise when cornering, particularly under acceleration. This sound occurs when the balls inside the joint develop play within their tracks due to wear or insufficient lubrication. If you hear this noise, it is a clear sign that the joint requires replacement before it fails entirely. Another warning sign is vibration through the steering wheel that intensifies with speed, which can indicate an imbalance or a binding joint.

Checking the CV boot is just as vital. If this rubber boot splits, the essential lubricating grease escapes, allowing dirt, water and road grit to penetrate the joint. This accelerates wear drastically and can destroy an otherwise healthy joint within weeks. If you notice grease splattered inside the wheel rim or around the wheel arch of your Honda Civic, inspect the boot and joint immediately. Catching a split early can sometimes save the joint if you fit a new boot and repack it with grease promptly.

How to choose the correct outer CV joint

Finding the right outer CV joint for your Honda Civic can sometimes be challenging, as technical specifications often vary depending on engine options, gearbox type and model year. The most critical details to verify are the spline counts on both the inner and outer sections of the joint, as well as whether the car features an ABS system. Many Civic models feature an ABS ring mounted directly on the outer joint, and the tooth count on this reluctor ring must match exactly for the safety systems to work as intended. We always recommend selecting your car's make, model and engine variant on our site to filter the exact car parts for your vehicle.

In addition to spline counts and ABS rings, the diameter of the oil seal surface may vary. Honda has revised its drivetrains across different production runs, and even if two joints appear identical at first glance, subtle dimension differences can prevent proper fitment. Shopping with a specialist in All car makes drivetrain components minimises the risk of ordering incorrect parts. If you are unsure which unit fits your Civic, check the original part number on the old component or count the splines before ordering to guarantee a straightforward repair.

Related parts to inspect

Be sure to check these dedicated pages for the same vehicle when working on the outer CV joint:

When one drivetrain component exhibits wear, adjacent parts on the same car often warrant inspection too. By comparing these dedicated pages for the Honda Civic, you can easily determine whether an issue lies with the outer CV joint or another neighbouring section of the driveline.

This is especially true on models where vibrations, play and unusual noises can travel between several drivetrain components. A quick look at related categories helps ensure you do not replace the right type of part while overlooking an adjacent component that contributes to the same problem.

Whilst replacing the outer CV joint on your Honda Civic, it is good practice to inspect the rest of the drivetrain. Often, failure in one component indicates that adjoining parts may also be nearing the end of their service life. For instance, inspect the entire drive shaft for corrosion or straightness. If the joint has seized tightly onto the shaft, it can sometimes be more economical and time-efficient to replace the complete shaft assembly. Be sure to check the inner joint as well, as prolonged imbalance from a worn outer joint can place extra strain on the inner unit over time.

Here are the key related categories for your Honda Civic:

  • Drive shafts for Honda Civic – If the complete assembly requires replacement.
  • Inner CV joints for Honda Civic – Located next to the gearbox, commonly responsible for vibrations under acceleration.
  • ABS rings for Honda Civic – If your original reluctor ring is cracked while the joint itself remains intact.
Inspecting these parts at the same time ensures your Honda Civic benefits from a thorough driveline overhaul, saving you both time and workshop costs in the long run.

Why buy from CVJoint24?

CVJoint24 is the international store of a Swedish driveline specialist, backed by our central warehouse in Helsingborg, Sweden. We have developed deep technical expertise in automotive drivelines to provide customers across Europe with top-tier products and accurate fitment data. For Honda Civic owners, this means direct access to a range hand-picked to handle the demands of modern motoring. With our wide coverage for the Civic, we cater to standard everyday commuter cars as well as performance-oriented versions.

We know how important it is to receive the correct part without delays. That is why we continually refine our vehicle database and streamline logistics. When you select your Civic's make, model and engine, you can order with total confidence that the part will fit. Our dedicated focus on driveline systems gives us a depth of stock that general motor factors simply cannot match. Choose CVJoint24 for your Honda Civic whenever you want reliable quality, specialist advice and a seamless buying experience from experts who know drivetrains inside out.

Frequently asked questions about outer CV joints for Honda Civic

How do I know if the outer CV joint on my Honda Civic is faulty?

The most common symptom is a clicking noise when turning and accelerating at the same time. You may also notice vibrations through the steering wheel or see grease splattered inside the wheel rim if the CV boot has split.

Can I replace just the outer CV joint, or do I need to replace the entire drive shaft?

On most Honda Civic models, you can easily replace just the outer CV joint. This is often a much more cost-effective repair than replacing the complete drive shaft, provided the shaft itself is undamaged.

Why is it important to count the splines on my Honda Civic?

Honda has used different spline counts on its drive shafts depending on the engine and model year. Counting the teeth on your old joint ensures you can be 100% certain the replacement part fits correctly.

Are the boot and grease included when I buy an outer CV joint from you?

Yes, our outer CV joint kits come complete with the outer joint, a new CV boot, high-quality grease, retaining clamps, and any circlips needed for installation.

What happens if I continue driving with a worn CV joint?

In the worst case, the joint can seize or sheer completely, resulting in a loss of drive that leaves you stranded. Severe vibrations can also cause consequential damage to the suspension and gearbox.

Do I have to replace the CV joints on both sides at the same time?

No, there is no need to replace both sides simultaneously. CV joints wear independently. However, it is always wise to inspect the CV boot on the opposite side while you have the car raised.

How does a damaged ABS ring on the CV joint affect my Honda Civic?

If the ABS ring on the CV joint is cracked or missing teeth, the ABS warning light will illuminate and the system may switch into failsafe mode. This affects braking performance under emergency conditions and will result in an MOT or roadworthiness test failure.