Outer CV joints for Opel

Find the right outer CV joint for your Opel in our comprehensive range, covering everything from early compacts like the Corsa A to modern releases. Whether your car is petrol, diesel or...

Choose model

Choose a model to move to more precise products and the next step in the vehicle tree.

Products for Outer CV joints for Opel

635 products
409 - 432 of 635
Item no.:355196
  • Position: Front, Outer
  • Inner splines: 20
  • Seal diameter: 51 mm
  • Outer splines: 22
  • Thread size: M22X1,5
Item no.:3586220
  • Position: Outer
  • Inner splines: 27
  • Seal diameter: 51 mm
  • Outer splines: 22
  • Thread size: M22X1,5
Item no.:3516002
  • Position: Outer
  • Inner splines: 24
  • Splines wheel side: 30
  • Outer diameter: 85 mm
Item no.:7300499
  • Position: Front, Outer
  • Inner splines: 35
  • Seal diameter: 55 mm
  • Outer splines: 33
  • Thread size: M20X1
Item no.:3580393
  • Position: Outer
  • Inner splines: 35
  • Splines wheel side: 33
  • Outer diameter: 88 mm
  • ABS teeth: 29
Item no.:0525059
  • Position: Outer
  • Inner splines: 22
  • Splines wheel side: 33
  • Seal diameter: 52 mm
  • Outer splines: 33
Item no.:0576870
  • Position: Outer
  • Inner splines: 28
  • Seal diameter: 52 mm
  • Outer splines: 22
  • ABS teeth: 29
Item no.:3584955
  • Position: Outer
  • Inner splines: 23
  • Seal diameter: 51,9 mm
  • Outer splines: 33
  • Thread size: M22X1,5
Item no.:354385
  • Position: Outer
  • Inner splines: 22
  • Seal diameter: 52 mm
  • Outer splines: 33
  • ABS teeth: 29
Item no.:352966
  • Position: Front, Outer
  • Inner splines: 23
  • Seal diameter: 52,5 mm
  • Outer splines: 33
  • Thread size: M22X1,5
Item no.:354998
  • Position: Outer
  • Inner splines: 24
  • Seal diameter: 52 mm
  • Outer splines: 33
  • Thread size: M22X1,5
Item no.:3513120
  • Position: Outer
  • Inner splines: 34
  • Seal diameter: 59 mm
  • Outer splines: 28
  • Thread size: M22X1,5
Item no.:0543142
  • Position: Outer
  • Inner splines: 25
  • Seal diameter: 52 mm
  • Outer splines: 33
  • ABS teeth: 29
Item no.:0579178
  • Position: Outer
  • Inner splines: 22
  • Seal diameter: 52 mm
  • Outer splines: 22
  • ABS teeth: 29
Item no.:354589
  • Position: Outer
  • Inner splines: 25
  • Splines wheel side: 30
  • Seal diameter: 53 mm
  • Splines gearbox side: 22
Item no.:359390
  • Position: Front, Outer
  • Inner splines: 26
  • Seal diameter: 53 mm
  • Outer splines: 30
  • Thread size: M24X1.5
Item no.:351234
  • Position: Outer
  • Inner splines: 24
  • Splines wheel side: 30
  • Seal diameter: 52 mm
  • Outer splines: 30
Item no.:356555
  • Position: Front, Outer
  • Inner splines: 28
  • Seal diameter: 52 mm
  • Outer splines: 22
  • Thread size: M20X1
Item no.:3539294
  • Position: Outer
  • Inner splines: 26
  • Seal diameter: 52 mm
  • Outer splines: 33
  • Thread size: M22X1,5
Item no.:359025
  • Position: Front, Outer
  • Inner splines: 23
  • Seal diameter: 53,5 mm
  • Outer splines: 25
  • Thread size: M24x1.5
Item no.:351674
  • Position: Outer
  • Inner splines: 25
  • Splines wheel side: 33
  • Seal diameter: 52 mm
  • ABS teeth: 43
Item no.:3587474
  • Position: Outer
  • Inner splines: 27
  • Seal diameter: 59 mm
  • Outer splines: 30
  • ABS teeth: 29
Item no.:351300
  • Position: Outer
  • Inner splines: 22
  • Seal diameter: 52 mm
  • Outer splines: 22
  • Thread size: M20X1,5
Item no.:0515265
  • Position: Outer
  • Inner splines: 35
  • Seal diameter: 55 mm
  • Outer splines: 33
  • ABS teeth: 29
Showing 409–432 of 635 products

Outer CV joints for Opel

The outer CV joint is one of the most critical components in your car's drivetrain. For an Opel owner, a properly functioning CV joint ensures that engine power is transferred smoothly and efficiently to the wheels, even during tight turns. The main task of the outer CV joint is to allow the drive shaft to rotate at a constant speed while the front wheels steer and move vertically with road unevenness. This demands exceptionally high material quality and manufacturing precision, especially as Opel models are widely known for their sharp driving dynamics and ride comfort.

At CVJoint24, we understand the importance of fitting components that match original specifications. With a comprehensive range tailored specifically for Opel, we cover everything from older classics to the latest models. A worn outer constant velocity joint can cause annoying noises and potentially lead to more extensive damage to the drive shaft or gearbox if left unattended. Choosing the right spare parts ensures that your car's drivetrain retains its structural integrity, keeping you driving reliably for many kilometres to come.

How outer CV joints differ between Opel models

Over the years, Opel has used a wide variety of engineering solutions for its drivetrains, meaning that outer CV joints can vary considerably between different models and engine configurations. One of the main differences lies in the spline count, namely the teeth found on the inside and outside of the joint. It is not uncommon for an Opel Astra and an Opel Vectra to have entirely different setups, even when sharing the same model year. Braking systems also play a significant role, as the ABS ring is often integrated into or mounted directly on the outer CV joint. Options include both passive reluctor rings and modern magnetic sensor rings; choosing the wrong type will stop the vehicle's safety systems from operating correctly.

Another factor distinguishing these constant velocity joints is their physical dimensions, such as the seal diameter and overall joint length. Opel often fits different CV joints depending on whether the car has a manual or automatic gearbox, as well as whether it is powered by a petrol or high-torque diesel engine. Diesel models frequently demand heavy-duty joints to manage the extra strain. It is therefore vital not to rely solely on the model name, but to check the technical specifications carefully to ensure the replacement part fits your exact drive shaft.

Common signs of wear

The classic symptom of a failing outer CV joint on your Opel is a rhythmic knocking or clicking noise when turning, particularly at lower speeds under acceleration. This sound occurs when the balls inside the joint develop play in their tracks due to wear or lack of lubrication. If ignored, this play will gradually worsen, ultimately risking total joint failure and leaving the car stranded without drive. It is a genuine safety concern that should be addressed promptly.

Another frequent symptom is vibration felt through the steering wheel or chassis under acceleration. This can often be traced back to a split CV boot, which allows the protective grease to escape while dirt, water and road grit enter the joint. Once lubrication is lost, friction increases dramatically, accelerating wear within just a few kilometres. We recommend inspecting the boots regularly during tyre changes or routine servicing. If you spot oil leaks or cracks in the rubber, it is time to act before the entire CV joint needs replacing.

How to choose the right outer CV joint for Opel

Navigating the wide selection of car parts can be daunting, but our goal is to help you pick the right component straight away. The most reliable way to find the correct outer CV joint for your Opel is to select your car's exact make, model and engine in our vehicle filter. This filters our stock to display only the parts technically compatible with your vehicle, saving time and preventing costly ordering mistakes. We also suggest double-checking the outer and inner spline counts if the data is available, as certain models underwent mid-production updates.

When selecting a CV joint, you should also confirm whether your car features ABS and which type of sensor ring is required. Our product pages provide detailed measurements and technical data to guide your decision. A high-quality CV joint is an investment in your car's longevity. We supply components that meet or exceed original equipment standards, giving you complete peace of mind. With our specialist drivetrain expertise, you can trust that you will receive a part that fits perfectly and performs reliably under your Opel's bonnet.

Popular Opel models to explore

Continue to the right Opel model for outer CV joints:

With such a broad catalogue, filtering by model is often the best next step. Selecting your exact model takes you to a page tailored specifically for fitment, drivetrain type and the exact components suited to your car.

Whether you drive an older Vectra or a modern Corsa, our aim is to provide the most precise fit on the market. Selecting your model from the list above takes you straight to the relevant components, making the buying process fast and straightforward.

Why shop with CVJoint24

As a Swedish driveline specialist shipping across the EU, we offer a distinctive combination of expert knowledge and an extensive inventory that general suppliers struggle to match. When you order an outer CV joint for your Opel from us, you get quality car parts backed by our accurate fitment guarantee. We know how frustrating it is to be stuck in the garage with a part that does not fit, which is why we invest heavily in keeping our database precise and up to date. Our dedicated focus on drivetrains allows us to provide targeted advice and support that general motor factors often lack.

Alongside our technical expertise, we offer fast dispatch from our warehouse on most of our 213 Opel parts, helping you get your car back on the road without delay. By focusing exclusively on driveline components, we can maintain high quality standards while offering competitive prices. At CVJoint24, you buy from a dedicated specialist that understands the demands European roads and weather place on your car's drivetrain. Discover the difference of working with a true specialist.

Frequently asked questions about outer CV joints for Opel

How do I know if my Opel needs a new outer CV joint?

The most common signs are a clicking or knocking noise when turning, especially under acceleration. You may also experience vibrations through the steering wheel or notice that the CV boot is split and has leaked grease.

Can I replace just the boot instead of the entire CV joint?

Yes, if you spot damage to the boot early before dirt has penetrated and caused wear to the joint itself, replacing the boot and repacking it with fresh grease may be sufficient.

Do CV joints differ between manual and automatic gearboxes on Opel models?

Yes, Opel frequently uses different CV joints depending on the gearbox type. They can differ in both length and spline count, so always select your car's make, model and engine to find the correct match.

What happens if I continue driving with a damaged outer CV joint?

If the joint fails completely, the car will lose all drive because power can no longer be transferred to the wheel. In the worst-case scenario, a broken joint can also damage other suspension components.

Do I need special tools to replace an outer CV joint on an Opel?

You generally need standard socket sets, a heavy-duty puller or hammer to release the joint from the shaft, and pliers to secure the boot clamps. A torque wrench is recommended for tightening the hub nut.

Do your CV joint kits include everything needed for installation?

Yes, our complete outer CV joint kits for Opel usually include the joint itself, a new boot, grease, circlips, clamps and a replacement hub nut or bolt.