Outer CV joints for Opel

Find the right outer CV joint for your Opel across our comprehensive range, covering everything from early compacts such as the Corsa A to modern family models. Whether your car is...

Choose model

Choose a model to move to more precise products and the next step in the vehicle tree.

Products for Outer CV joints for Opel

442 products
1 - 24 of 442
Item no.:0566046
  • Position: Outer
  • Seal diameter: 52 mm
  • Inner splines: 22
  • Outer splines: 33
  • Joint diameter: 79,2 mm
Item no.:0534453
  • Position: Outer
  • Seal diameter: 51 mm
  • Inner splines: 23
  • Outer splines: 25
  • Joint diameter: 82 mm
Item no.:0575742
  • Position: Outer
  • Seal diameter: 51 mm
  • Inner splines: 21
  • Outer splines: 22
  • Joint diameter: 75 mm
Item no.:0591582
  • Position: Outer
  • ABS teeth: 29
  • Seal diameter: 52 mm
  • Inner splines: 28
  • Outer splines: 22
Item no.:0518027
  • Position: Outer
  • Seal diameter: 51,9 mm
  • Inner splines: 23
  • Outer splines: 33
Item no.:0591041
  • Position: Outer
  • Seal diameter: 56 mm
  • Inner splines: 23
  • Outer splines: 25
  • Joint diameter: 133,5 mm
Item no.:0530491
  • Position: Outer
  • Seal diameter: 53 mm
  • Inner splines: 26
  • Outer splines: 30
  • Joint diameter: 91 mm
Item no.:0510422
  • Position: Outer
  • ABS teeth: 29
  • Seal diameter: 52 mm
  • Inner splines: 22
  • Outer splines: 33
Item no.:0519263
  • Position: Outer
  • Seal diameter: 53,5 mm
  • Inner splines: 23
  • Outer splines: 25
Item no.:355090
  • Position: Front, Outer
  • Inner splines: 23
  • Total length: 153 mm
  • Splines wheel side: 33
Item no.:0597246
  • Position: Outer
  • ABS teeth: 29
  • Seal diameter: 52 mm
  • Inner splines: 23
  • Outer splines: 22
Item no.:0599725
  • Position: Outer
  • Seal diameter: 56,5 mm
  • Inner splines: 36
  • Outer splines: 27
Item no.:252013
  • Position: Front, Outer
  • Seal diameter: 60 mm
  • Inner splines: 28
  • Diameter: 60 mm
  • Splines wheel side: 29
Item no.:0505079
  • Position: Outer
  • Seal diameter: 55,7 mm
  • Inner splines: 34
  • Outer splines: 25
Item no.:0593244
  • Position: Outer
  • Seal diameter: 52,2 mm
  • Inner splines: 24
  • Outer splines: 33
  • Joint diameter: 158 mm
Item no.:0566754
  • Position: Outer
  • Seal diameter: 52 mm
  • Inner splines: 24
  • Outer splines: 33
  • Joint diameter: 84,5 mm
Item no.:0501871
  • Position: Outer
  • Seal diameter: 52 mm
  • Inner splines: 24
  • Outer splines: 33
  • Joint diameter: 84,5 mm
Item no.:0535156
  • Position: Outer
  • Seal diameter: 51 mm
  • Inner splines: 22
  • Outer splines: 25
Item no.:0520647
  • Position: Outer
  • Seal diameter: 59 mm
  • Inner splines: 34
  • Outer splines: 28
Item no.:356634
  • Position: Front, Outer
  • Inner splines: 23
  • Total length: 143 mm
  • Splines wheel side: 28
Item no.:0545646
  • Position: Outer
  • Seal diameter: 58 mm
  • Inner splines: 34
  • Outer splines: 28
  • Joint diameter: 86 mm
Item no.:0529899
  • Position: Outer
  • Seal diameter: 70 mm
  • Inner splines: 36
  • Outer splines: 31
Item no.:0574958
  • Position: Outer
  • ABS teeth: 29
  • Seal diameter: 52 mm
  • Inner splines: 25
  • Outer splines: 33
Item no.:0541290
  • Position: Outer
  • ABS teeth: 29
  • Seal diameter: 52 mm
  • Inner splines: 22
  • Outer splines: 22
Showing 1–24 of 442 products

Outer CV joints for Opel

The outer CV joint is one of the most critical components in your car's drivetrain. For an Opel owner, a properly functioning CV joint ensures that engine power is transferred smoothly and efficiently to the wheels, even on full steering lock. The primary task of the outer CV joint is to allow the drive shaft to rotate at a constant velocity whilst the front wheels steer and move vertically with road surface imperfections. This places exceptionally high demands on material quality and manufacturing precision, especially as Opel models are renowned for their driving dynamics and comfort.

At CVJoint24, we understand the importance of fitting components that match original equipment specifications. With over 200 different items specifically for Opel, our range covers everything from older classics to the latest models. A worn outer constant velocity joint not only causes irritating noises, but can also lead to more extensive damage to the drive shaft or gearbox if neglected. By choosing the right spare parts, you protect the integrity of your car's drivetrain and ensure reliable motoring for many kilometres to come.

How outer CV joints differ between Opel models

Over the years, Opel has used a wide variety of engineering solutions for its drivetrains, which means outer CV joints can vary significantly between different models and engine variants. One of the primary differences lies in the spline count: the teeth found on the inside and outside of the joint. It is not uncommon for an Opel Astra and an Opel Vectra to have entirely different spline setups, even within the same model year. Braking systems also play a crucial role, as the ABS ring is frequently integrated into or pressed onto the outer CV joint. Both passive toothed rings and modern magnetic reluctor rings are used; selecting the incorrect type will cause your vehicle's safety systems to stop working.

Another key distinction is physical dimensions, such as the seal surface diameter and the overall length of the joint. Opel often fits different CV joints depending on whether the car has a manual or automatic gearbox, as well as whether it is powered by a petrol engine or a high-torque diesel. Diesel engines generally require heavier-duty joints to manage the extra torque. It is therefore vital not just to rely on the model name, but to check the technical specifications carefully to ensure the replacement part fits your specific driveshaft.

Common signs of wear

The most classic symptom of a failing outer CV joint on your Opel is a rhythmic knocking or clicking noise when cornering, especially at lower speeds under acceleration. This sound occurs when the internal ball bearings develop play in their tracks due to mechanical wear or poor lubrication. If you ignore this clicking, the play will worsen progressively, ultimately causing the joint to fail completely and leaving the car stranded without drive. This represents a serious safety risk that should never be ignored.

Another very common sign is vibration through the steering wheel or chassis during acceleration. This can frequently be traced back to a split CV boot, which allows the protective grease to escape while dirt, moisture and road grit penetrate the joint. Once lubrication is lost, friction spikes dramatically and severe wear sets in over just a few kilometres. We therefore recommend inspecting your CV joint boots regularly during tyre changes or routine servicing. If you spot grease splatters or cracks in the rubber, it is time to act before the entire CV joint requires replacement.

How to choose the right outer CV joint for Opel

Finding the correct replacement car parts can feel daunting, but our aim is to make selection straightforward. The most reliable way to find the right outer CV joint for your Opel is to select your vehicle's make, model and engine variant in our store. By choosing your car's details, you filter our catalogue of 213 items to display only those that are technically compatible. This saves time and avoids frustrating ordering mistakes. We still advise double-checking the outer and inner spline counts against your existing part whenever possible, as minor production revisions did occur across model lifecycles.

When selecting a replacement CV joint, also confirm whether your vehicle is fitted with ABS and which type of sensor ring is required. Our product pages provide detailed dimensions and technical specifications to make your choice simple. A high-grade constant velocity joint is an investment in your vehicle's longevity. We supply durable components engineered to meet or exceed original specifications, giving you complete peace of mind. With our specialist drivetrain expertise, you can be sure of a part that fits accurately and performs reliably on your Opel.

Popular Opel models

Select your Opel model to view matching outer CV joints:

With such a comprehensive range available, narrowing your search to your specific model is the best next step. Selecting your exact car brings up a filtered catalogue tailored to your driveline configuration and vehicle specifications.

Whether you run an older Vectra or a modern Corsa, our goal is to supply the most accurate fitment on the market. Select your model from the list above to view relevant products directly and complete your order quickly and confidently.

Why buy from CVJoint24

As a Swedish driveline specialist shipping across the EU, we offer a distinctive blend of deep technical expertise and an extensive product range. When you buy an outer CV joint for your Opel from us, you receive high-quality spare parts backed by our commitment to accurate fitment. We know how frustrating it is to dismantle your car in the garage only to find a replacement part does not fit, which is why we continuously refine our technical data. Our focused dedication to drivetrain components allows us to provide knowledgeable advice that generic car parts retailers simply cannot match.

Alongside our product expertise, we dispatch quickly from our central warehouse to help get your vehicle back on the road without delay. By focusing exclusively on power transmission and driveline components, we deliver superior quality alongside competitive pricing. At CVJoint24, you order from an experienced specialist that understands the demands European roads and weather place on your car's running gear. Discover the difference of buying from a true driveline expert.

Frequently asked questions about outer CV joints for Opel

How do I know if my Opel needs a new outer CV joint?

The most common signs are a clicking or knocking noise when turning, especially under acceleration. You may also experience vibrations through the steering wheel or notice that the CV boot is split and has leaked grease.

Can I replace just the boot instead of the entire CV joint?

Yes, if you spot damage to the boot early before dirt has penetrated and caused wear to the joint itself, replacing the boot and repacking it with fresh grease may be sufficient.

Do CV joints differ between manual and automatic gearboxes on Opel models?

Yes, Opel frequently uses different CV joints depending on the gearbox type. They can differ in both length and spline count, so always select your car's make, model and engine to find the correct match.

What happens if I continue driving with a damaged outer CV joint?

If the joint fails completely, the car will lose all drive because power can no longer be transferred to the wheel. In the worst-case scenario, a broken joint can also damage other suspension components.

Do I need special tools to replace an outer CV joint on an Opel?

You generally need standard socket sets, a heavy-duty puller or hammer to release the joint from the shaft, and pliers to secure the boot clamps. A torque wrench is recommended for tightening the hub nut.

Do your CV joint kits include everything needed for installation?

Yes, our complete outer CV joint kits for Opel usually include the joint itself, a new boot, grease, circlips, clamps and a replacement hub nut or bolt.