Outer CV joints for Toyota

Explore our extensive range of outer CV joints and CV boots engineered for Toyota vehicles. Our catalogue covers everything from classic 1980s models like the Starlet and Corolla to...

Choose model

Choose a model to move to more precise products and the next step in the vehicle tree.

Products for Outer CV joints for Toyota

595 products
385 - 408 of 595
Item no.:658167
  • Position: Rear, Outer
  • Inner splines: 19
  • Splines wheel side: 26
  • Total length: 144 mm
Item no.:0503406
  • Position: Outer
  • Inner splines: 22
  • Seal diameter: 56 mm
  • Outer splines: 26
  • ABS teeth: 48
Item no.:0577230
  • Position: Outer
  • Inner splines: 27
  • Seal diameter: 63 mm
  • Outer splines: 26
  • ABS teeth: 48
Item no.:7313980
  • Position: Front, Outer
  • Inner splines: 23
  • Seal diameter: 56 mm
  • Outer splines: 26
  • ABS teeth: 48
Item no.:359634
  • Position: Outer
  • Inner splines: 29
  • Seal diameter: 72,7 mm
  • Outer splines: 30
  • Thread size: M28X1,5
Item no.:3582180
  • Position: Outer
  • Inner splines: 25
  • Seal diameter: 61 mm
  • Outer splines: 26
  • Thread size: M22X1,5
Item no.:7314014
  • Position: Outer
  • Inner splines: 23
  • Splines wheel side: 26
  • Seal diameter: 56 mm
  • Outer splines: 26
Item no.:0529082
  • Position: Outer
  • Inner splines: 23
  • Seal diameter: 56 mm
  • Outer splines: 26
  • Thread size: M22X1,5
Item no.:359356
  • Position: Front, Outer
  • Inner splines: 27
  • Seal diameter: 60 mm
  • Outer splines: 26
  • Thread size: M28X1,5
Item no.:3542695
  • Position: Outer
  • Inner splines: 27
  • Seal diameter: 63 mm
  • Outer splines: 30
  • ABS teeth: 48
Item no.:0591072
  • Position: Front, Outer
  • Inner splines: 24
  • Seal diameter: 56 mm
  • Outer splines: 26
  • ABS teeth: 48
Item no.:0561510
  • Position: Outer
  • Inner splines: 25
  • Seal diameter: 56 mm
  • Outer splines: 26
  • ABS teeth: 48
Item no.:3512504
  • Position: Outer
  • Inner splines: 24
  • Seal diameter: 56 mm
  • Outer splines: 26
  • Joint diameter: 85 mm
Item no.:354367
  • Position: Outer
  • Inner splines: 27
  • Seal diameter: 61 mm
  • Outer splines: 30
  • Thread size: M22X1,5
Item no.:0511369
  • Position: Outer
  • Inner splines: 32
  • Seal diameter: 56 mm
  • Outer splines: 26
  • ABS teeth: 48
Item no.:359308
  • Position: Front, Outer
  • Inner splines: 24
  • Seal diameter: 58 mm
  • Outer splines: 26
  • ABS teeth: 48
Item no.:353881
  • Position: Front, Outer
  • Inner splines: 24
  • Seal diameter: 56 mm
  • Outer splines: 26
  • Joint diameter: 84 mm
Item no.:351640
  • Position: Front, Outer
  • Inner splines: 23
  • Seal diameter: 56 mm
  • Outer splines: 26
  • ABS teeth: 48
Item no.:3568152
  • Position: Outer
  • Inner splines: 22
  • Splines wheel side: 26
  • Outer diameter: 79 mm
  • ABS teeth: 48
Item no.:357465
  • Position: Front, Outer
  • Inner splines: 23
  • Seal diameter: 58 mm
  • Outer splines: 26
  • Thread size: M22X1,5
Item no.:358667
  • Position: Front, Outer
  • Inner splines: 27
  • Seal diameter: 61 mm
  • Outer splines: 26
  • ABS teeth: 30
Item no.:3519918
  • Position: Front, Outer
  • Inner splines: 24
  • Seal diameter: 56 mm
  • Outer splines: 26
  • Thread size: M22X1,5
Item no.:359668
  • Position: Front, Outer
  • Inner splines: 27
  • Seal diameter: 61,2 mm
  • Outer splines: 30
  • ABS teeth: 48
Item no.:3574482
  • Position: Front, Outer
  • Inner splines: 29
  • Seal diameter: 56 mm
  • Outer splines: 26
  • Thread size: M22X1,5
Showing 385–408 of 595 products

Outer CV joints for Toyota

An outer CV joint is a critical component in your Toyota's drivetrain. Its primary job is to transfer torque from the drive shaft to the front wheels while allowing the wheels to steer and accommodate suspension movement. Toyota is renowned for its legendary reliability, but even on these cars, the CV joints are subjected to enormous stress, particularly during urban driving with tight turns or on rough road surfaces. At CVJoint24, you will find outer CV joints that meet or exceed original equipment specifications, ensuring you maintain the exact driving dynamics and dependability your car was built to deliver.

We stock parts for a comprehensive range of models, from reliable older workhorses to the latest generations of hybrids. Every constant velocity joint in our range is manufactured from high-grade steel and precision-hardened to withstand the severe forces generated under hard acceleration and full steering lock. Choosing a quality component is an investment in your vehicle's lifespan; a sub-standard CV joint risks premature failure and can cause secondary damage to wheel bearings and the gearbox. By focusing on specialist driveline expertise, we provide spare parts engineered to withstand harsh European roads, road salt and dramatic temperature changes.

How outer CV joints differ between Toyota models

Over the decades, Toyota has engineered a wide variety of driveline configurations. The differences between an outer CV joint for a Toyota Yaris and a heavy-duty unit for a Land Cruiser or RAV4 are considerable. It is not just about physical dimensions, but also the internal and external spline tooth counts, the diameter of the seal surface, and whether the vehicle uses an ABS system. Certain models feature an ABS ring pressed directly onto the CV joint, whereas others integrate the sensor reluctor into the wheel bearing, which alters the joint's design completely.

Furthermore, dimensions often vary between manual and automatic gearboxes, as well as between petrol, diesel and hybrid engine options. Hybrids deliver high instant torque from standstill via their electric motors, placing distinct demands on the structural strength of the joint. Understanding these subtleties is our core strength as specialists. We ensure you get a component tailored to your car's exact specifications, whether it is a classic Corolla or a modern Camry. With our deep product range, we also cover the less common engine variants that general car parts suppliers often overlook.

Common signs of CV joint wear

The most classic symptom of a worn outer CV joint is a rhythmic clicking or knocking noise when manoeuvring on full steering lock at low speeds, in both forward and reverse. This sound occurs as the internal balls travel along worn tracks inside the joint housing. The sharper the turning angle, the greater the load on the joint, making the noise far more pronounced. Another frequent warning sign is steering wheel vibration under acceleration, suggesting that the joint has begun to bind or that internal lubrication has broken down.

Problems often begin with a split or perished CV boot. Once the boot fails, the lubricating grease is thrown out, allowing grit, water and road salt to penetrate. This creates an abrasive paste that rapidly destroys the hardened bearing surfaces inside the joint. If you notice grease splattered inside the wheel rim or across the inner wheel arch, inspect your drive shaft immediately. Acting early and fitting a replacement CV boot can sometimes save the joint, but if clicking noises have already begun, replacing the complete outer CV joint is the only reliable way to prevent an inconvenient breakdown at the roadside.

Choosing the right outer CV joint for your Toyota

Finding the correct replacement part can seem challenging given the numerous technical variations across Toyota's ranges. The most dependable method is to select your car's specific make, model and engine variant in our vehicle selector. This filters our catalogue to show the exact products compatible with your car. However, be aware that chassis number splits or differing drive shaft suppliers within the same model year can occasionally influence joint choice.

We always advise checking the technical specifications listed in the product description, particularly the internal and external spline counts. If you have the opportunity to count the splines on your existing joint before ordering, it offers complete peace of mind. During installation, always use the supplied high-pressure grease and tighten the hub bolt or axle nut to the vehicle manufacturer's specified torque. An incorrectly fitted joint can lead to premature wear or damaged wheel bearings. As your driveline specialist, we are always on hand to help you find the correct technical details for your repair.

Popular Toyota models to explore

Select your Toyota model to find the correct outer CV joint:

Given our extensive range, narrowing your search to model level is the easiest way forward. Choosing your specific car provides a refined catalogue showing the exact fitment, driveline type and components matched to your vehicle.

Navigating directly to your model gives you a focused view of the replacement parts designed for your car's production year and chassis configuration. This is the fastest route through our stock to ensure you get the right part first time.

Why buy from CVJoint24?

As the international store of a Swedish driveline specialist, we deliver technical expertise that standard car parts shops simply cannot match. We understand the engineering behind every Toyota and how their drivetrains are designed to achieve exceptional mileage. Our priority is quality and precision fitment; we do not just supply spare parts, we provide the correct technical solution for your vehicle. You can shop with total confidence thanks to our fitment accuracy, ensuring your car is back on the road without unnecessary delay.

When a CV joint fails, you need parts quickly. That is why we offer fast dispatch across the EU from our central warehouse in Helsingborg, Sweden, keeping vehicle downtime at your garage to an absolute minimum. By combining an extensive, highly specialised inventory with reliable customer service and real technical knowledge, we aim to be the first choice for Toyota owners requiring premium driveline components. With CVJoint24, you always get the right part tailored to your car's exact requirements.

Frequently Asked Questions about outer CV joints for Toyota

How do I know if my Toyota needs a new outer CV joint?

The most common symptom is a clicking or knocking noise from the front suspension when cornering tightly under power. If the noise disappears when driving straight ahead, it is almost certainly a worn outer CV joint.

Can I replace just the CV boot instead of the entire joint?

Yes, if you spot damage to the CV boot early and the joint has not yet started to make noise or vibrate, replacing the boot and repacking it with fresh grease is often sufficient.

Does the same outer CV joint fit both the left and right side on a Toyota?

On most Toyota models, the outer CV joints are identical on both the left- and right-hand side, but there are exceptions. Always verify the exact product specifications for your vehicle.

What is included when I buy an outer CV joint from you?

Our kits are comprehensive and typically include the CV joint itself, a vehicle-specific CV boot, high-grade CV joint grease, retaining clips and circlips, plus any necessary mounting hardware such as the axle bolt or hub nut.

Why is it important to select the exact make, model and engine variant when ordering?

Toyota often uses different spline counts and ABS rings across identical model years. Selecting your exact make, model and engine specification ensures you receive the correct part engineered specifically for your chassis.

Do you offer a warranty on CV joints for Toyota?

Yes, we provide a full product warranty alongside our guaranteed fitment policy when you select your vehicle's make, model and engine, ensuring you receive a replacement that performs flawlessly.