Outer CV joints for Volvo S70 2.4 AWD

Explore our range of outer CV joints engineered for the Volvo S70 2.4 AWD. This category features components tailored specifically for all-wheel-drive saloon models from the 1999–2000...

Products for Outer CV joints for Volvo S70 2.4 AWD

4 products
1 - 4 of 4
Item no.:0515038
  • Position: Outer
  • ABS teeth: 48
  • Seal diameter: 56 mm
  • Inner splines: 25
  • Outer splines: 26
Item no.:657261
  • Position: Rear, Outer
  • Seal diameter: 56 mm
  • Inner splines: 29
  • Diameter: 56 mm
  • ABS teeth: 88
Item no.:357242
  • Position: Outer
  • Seal diameter: 56 mm
  • Inner splines: 27
  • Outer splines: 36
  • ABS teeth: 48
Item no.:659252
  • Position: Rear, Outer
  • Seal diameter: 56 mm
  • Inner splines: 29
  • Diameter: 56 mm
  • ABS teeth: 88

Outer CV joints for Volvo S70 2.4 AWD

When it comes to the Volvo S70 2.4 AWD, the drivetrain is central to the car's performance, particularly given the sophisticated all-wheel drive system that requires exact synchronisation between all moving components. The outer CV joint is a critical link that transfers torque from the drive shaft to the front wheels while simultaneously permitting steering angles and suspension movement under drive. For an AWD model like the S70, significantly higher demands are placed on strength and precision than on a front-wheel-drive variant, as the torque distribution between the axles directly influences vehicle stability and handling. With us, you will find the right car parts engineered specifically to meet these technical requirements, ensuring long service life and dependable operation. We understand the importance of every component in the transmission matching the highest standards to withstand the extra stresses of all-wheel drive.

What does the outer CV joint do on a Volvo S70 2.4 AWD?

The primary role of the outer CV joint on a Volvo S70 2.4 AWD is to allow torque transfer at varying articulation angles, enabling the vehicle to steer smoothly whilst delivering drive. Because the front wheels must steer as well as propel the car forward, the joint must articulate without losing traction or causing unwelcome vibrations through the chassis. In an all-wheel-drive car such as the S70 2.4 AWD, the outer joint works in close conjunction with the inner joint and the vehicle's drive shaft. This mechanical articulation, provided by the constant velocity joint, allows you to maintain continuous power even during sharp cornering or over uneven surfaces. Without a sound outer CV joint, power delivery would turn jerky and cornering stability would deteriorate markedly, compromising driving safety.

Common signs of wear

The most typical symptom of a failing outer CV joint on your Volvo S70 is a pronounced clicking or knocking noise clearly heard on full steering lock, such as when manoeuvring into a parking space or tackling sharp corners. This sound occurs when the balls inside the joint develop play within their tracks due to mechanical wear or lubricant loss. Another telltale sign is steering wheel vibration during acceleration, which indicates that the joint can no longer rotate smoothly under load. If you notice that the CV boot is split, cracked or loose, prompt action is essential. A torn boot lets out the essential grease whilst admitting grit, sand and road moisture into the joint assembly. This accelerates wear drastically and can cause total failure in very little time. Ignoring these warnings can lead to the CV joint seizing or shearing completely, leaving the vehicle stranded and potentially causing collateral damage to adjacent drivetrain parts.

How to choose the correct outer CV joint

Selecting the correct component for a Volvo S70 2.4 AWD demands care and technical awareness. Because AWD variants frequently feature unique spline counts (the teeth on the shaft) and distinct shaft diameters compared with two-wheel-drive models, choosing the right part should never involve guesswork. The most reliable approach is to select your vehicle by its exact make, model and engine variant in our store. We have mapped comprehensive technical specifications to match the right outer CV joint precisely to your vehicle. When ordering, you must also confirm your ABS configuration, as the ABS ring is often integrated directly onto the outer CV joint housing. Always verify the spline counts on both the internal and external sections if carrying out a manual inspection, though with our fitment guarantee you can rely on the part we recommend for your Volvo S70 2.4 AWD fitting accurately without modification.

Related parts to inspect

Be sure to review these specific pages for the same vehicle when working on the outer CV joint:

Whenever a drivetrain component shows signs of wear, neighbouring parts on the vehicle should also be inspected. By comparing these relevant pages for the Volvo S70 2.4 AWD, it is far simpler to determine whether a fault lies purely with the outer CV joint or with an adjacent section of the power delivery system.

This is especially important on models where vibrations, play and unusual noises can translate across several components within the same drivetrain. A quick check of related categories reduces the likelihood of replacing one worn item while overlooking an adjacent component contributing to the same issue.

Replacing worn components at the same time saves both labour and money in the long run, sparing you from dismantling the same assemblies twice.

Why buy from cvjoint24.com?

CVJoint24 is your dedicated partner for all things drivetrain and transmission. As a specialist Swedish driveline expert with our central warehouse in Helsingborg, Sweden, we supply a comprehensive range across the European Union that generalist suppliers struggle to equal, particularly for specialist AWD models like the Volvo S70 2.4 AWD. We understand the technical details and heavy duties expected of all-wheel-drive vehicles, stocking only components manufactured to demanding quality benchmarks. Our fitment guarantee removes the risk of ordering incorrect spares, saving you time and frustration in the garage. Thanks to our efficient distribution and focused service, we dispatch orders promptly across the EU so you can get your car back on the road without delay. Driveline engineering is our core focus, and our mission is to supply the correct part first time backed by sound technical knowledge. With CVJoint24, you receive not just a spare part, but the assurance of dealing with a specialist who understands your car's drivetrain completely.

Frequently asked questions about outer CV joints for Volvo S70 2.4 AWD

How do I know if my Volvo S70 2.4 AWD needs a new outer CV joint?

The most common symptom is a clicking or knocking noise heard when turning sharply under acceleration. If the noise disappears when driving straight ahead, it is almost certainly a worn outer CV joint.

Does the same CV joint fit both front-wheel drive S70 and AWD models?

No, there are often differences in dimensions and spline counts between front-wheel drive and all-wheel drive models. Always select your exact make, model and engine to ensure you get the correct part for your AWD.

Are the CV boot and grease included when I buy an outer CV joint from you?

Yes, our outer CV joints are supplied as complete fitting kits including the CV joint, CV boot, grease, circlip and all necessary hardware for installation.

Can I replace just the outer CV joint, or do I need to replace the complete drive shaft?

On the Volvo S70 2.4 AWD, you can easily replace just the outer constant velocity joint, provided the drive shaft itself is straight and undamaged.

Why is it important to inspect the propeller shaft at the same time?

Because the S70 2.4 AWD features all-wheel drive, vibrations from a worn propeller shaft can travel through the drivetrain and cause premature wear to both drive shafts and CV joints.

How quickly can I have my new CV joint delivered?

We offer next-day dispatch on stocked items, meaning you will usually receive your new CV joint promptly after placing your order.