Outer CV joints for Volvo S70

Find the right outer CV joint for your Volvo S70, whether front-wheel drive or all-wheel drive. Our range covers the entire 1997 to 2000 model series, including petrol, diesel and...

Choose version

Choose a version to refine the results and get closer to the right product.

Products for Outer CV joints for Volvo S70

53 products
1 - 24 of 53
Item no.:0546007
  • Position: Outer
  • ABS teeth: 48
  • Seal diameter: 56 mm
  • Inner splines: 33
  • Outer splines: 36
Item no.:0511050
  • Position: Outer
  • ABS teeth: 48
  • Seal diameter: 56 mm
  • Inner splines: 25
  • Outer splines: 26
Item no.:656991
  • Position: Rear, Outer
  • Seal diameter: 56 mm
  • Inner splines: 29
  • Diameter: 56 mm
  • ABS teeth: 88
Item no.:0538549
  • Position: Outer
  • ABS teeth: 48
  • Seal diameter: 56 mm
  • Inner splines: 28
  • Outer splines: 26
Item no.:0590704
  • Position: Outer
  • Seal diameter: 56 mm
  • Inner splines: 28
  • Outer splines: 26
  • Joint diameter: 96 mm
Item no.:0514335
  • Position: Outer
  • ABS teeth: 48
  • Seal diameter: 56 mm
  • Inner splines: 27
  • Outer splines: 36
Item no.:0561356
  • Position: Outer
  • Inner splines: 33
  • Outer diameter: 88 mm
  • Splines wheel side: 36
  • ABS teeth: 48
Item no.:0578718
  • Position: Outer
  • ABS teeth: 48
  • Seal diameter: 56 mm
  • Inner splines: 33
  • Outer splines: 36
Item no.:0542818
  • Position: Outer
  • ABS teeth: 48
  • Seal diameter: 56 mm
  • Inner splines: 25
  • Outer splines: 26
Item no.:652208
  • Position: Rear, Outer
  • Seal diameter: 56 mm
  • Inner splines: 29
  • Diameter: 56 mm
  • ABS teeth: 88
Item no.:0583341
  • Position: Outer
  • ABS teeth: 48
  • Seal diameter: 56 mm
  • Inner splines: 28
  • Outer splines: 26
Item no.:0558632
  • Position: Outer
  • Seal diameter: 56 mm
  • Inner splines: 28
  • Outer splines: 26
  • Joint diameter: 96 mm
Item no.:0518447
  • Position: Outer
  • ABS teeth: 48
  • Seal diameter: 56 mm
  • Inner splines: 27
  • Outer splines: 36
Item no.:0575752
  • Position: Outer
  • ABS teeth: 48
  • Seal diameter: 56 mm
  • Inner splines: 33
  • Outer splines: 36
Item no.:0523227
  • Position: Outer
  • ABS teeth: 48
  • Seal diameter: 56 mm
  • Inner splines: 25
  • Outer splines: 26
Item no.:652499
  • Position: Rear, Outer
  • Seal diameter: 56 mm
  • Inner splines: 29
  • Diameter: 56 mm
  • ABS teeth: 88
Item no.:0510132
  • Position: Outer
  • ABS teeth: 48
  • Seal diameter: 56 mm
  • Inner splines: 28
  • Outer splines: 26
Item no.:0526364
  • Position: Outer
  • Seal diameter: 56 mm
  • Inner splines: 28
  • Outer splines: 26
  • Joint diameter: 96 mm
Item no.:0507977
  • Position: Outer
  • ABS teeth: 48
  • Seal diameter: 56 mm
  • Inner splines: 27
  • Outer splines: 36
Item no.:0508855
  • Position: Outer
  • ABS teeth: 48
  • Seal diameter: 56 mm
  • Inner splines: 33
  • Outer splines: 36
Item no.:0531985
  • Position: Outer
  • ABS teeth: 48
  • Seal diameter: 56 mm
  • Inner splines: 25
  • Outer splines: 26
Item no.:658314
  • Position: Rear, Outer
  • Seal diameter: 56 mm
  • Inner splines: 29
  • Diameter: 56 mm
  • ABS teeth: 88
Item no.:0504328
  • Position: Outer
  • ABS teeth: 48
  • Seal diameter: 56 mm
  • Inner splines: 28
  • Outer splines: 26
Item no.:0531849
  • Position: Outer
  • Seal diameter: 56 mm
  • Inner splines: 28
  • Outer splines: 26
  • Joint diameter: 96 mm
Showing 1–24 of 53 products

Outer CV joints for Volvo S70

The Volvo S70 is a model renowned for comfort and dependability, but just like any front-wheel-drive or all-wheel-drive vehicle, its drivetrain faces considerable stress over time. The outer CV joint is a vital component that allows power from the engine to reach the road wheels even while cornering. At CVJoint24, you will find a carefully curated range of 32 matching items specifically for this model. We appreciate the importance of an exact fit, particularly as Volvo used differing specifications across production years depending on engine options and transmission setups. By focusing on quality and technical precision, we ensure your car retains its composed handling. Replacing a worn joint promptly prevents consequential damage to other driveline parts. Explore our selection and use our search filter to find the right part for your vehicle.

What does the outer CV joint do on a Volvo S70?

The primary job of the outer CV joint on a Volvo S70 is to transfer torque from the drive shaft to the front road wheel. Unlike the inner joint, which mainly accommodates vertical suspension travel, the outer constant velocity joint must cope with wide steering angles when you turn the wheel. Being a CV joint, it transfers this power at a constant rotational speed regardless of the operating angle. This is essential for preventing steering vibrations and providing smooth, linear acceleration. On the S70, the outer joint is seated directly into the wheel hub and is often equipped with an ABS ring that relays wheel-speed signals to the braking system. Without a functioning joint, the car could not negotiate bends under load without excessive mechanical bind. It is an intricate component requiring permanent lubrication from dedicated CV joint grease, sealed inside a protective rubber CV boot.

Common signs of wear

The classic indicator of a failing outer CV joint on your Volvo S70 is a rhythmic clicking or knocking noise when taking tight corners, especially under acceleration. This sound originates from worn internal bearing tracks when the steel balls are forced to operate at acute angles. Another symptom is vibration felt through the steering wheel at motorway speeds, suggesting an imbalance or a joint that has begun to bind. You should also carry out regular checks on the CV boot. If the boot has split, the lubricating grease escapes while road grit and water penetrate the assembly. This accelerates wear drastically and can cause total joint failure within a very short distance. If you spot grease splattered on the inside of the road wheel or across the wheel arch liner, the boot is torn and the joint must be inspected or replaced without delay to avoid a breakdown.

How to choose the correct outer CV joint

Selecting the correct outer CV joint for your specific Volvo S70 calls for careful attention, as several technical configurations exist. The main differences lie in the number of splines (teeth) on both the outer stub shaft entering the wheel hub and the internal splines where the drive shaft connects. The ABS ring is equally critical; its tooth count must match your vehicle's ABS sensors to avoid triggering warning lights on the dashboard. Some variants feature 48 teeth, whilst others use a different setup. Differences can also exist between manual and automatic transmission variants. To choose easily and accurately, select your vehicle's make, model and engine variant in our search filter. This will narrow down our 32 items to those suited to your specific car. Always cross-check the specifications in the product details against your existing component if unsure, especially regarding spline counts, ensuring trouble-free installation and reliable drivetrain performance.

Related parts to check

We recommend checking these exact pages for the same vehicle when working on the outer CV joint:

When one drivetrain component shows signs of wear, related parts on the car frequently need attention too. By comparing these dedicated pages for the Volvo S70, you can more easily confirm whether the issue lies purely with the outer CV joint or another neighbouring transmission part.

This is particularly relevant for models where vibrations, play and strange noises can transfer between multiple drivetrain components. A quick look at related categories minimises the risk of fitting the correct new part whilst overlooking adjacent wear that contributes to the very same problem.

Why shop with CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, supplying high-quality transmission components from our central warehouse in Helsingborg, Sweden. We have built deep technical expertise in these driveline parts, enabling us to provide a catalogue of outstanding depth and reliability. When you order from us, you receive parts manufactured to meet or exceed original equipment specifications for your Volvo S70. Our strength lies in our singular focus; by specialising in driveline systems, we offer targeted advice alongside the most accurate replacement parts. Filtering by make, model and engine variant gives you total confidence that the part delivered will fit your car seamlessly. We combine technical know-how with swift EU shipping and responsive customer support ready to help with your driveline repair. Rely on an expert for your car's most critical moving parts – choose CVJoint24.

Frequently asked questions about outer CV joints for Volvo S70 – Quality for your drivetrain

How do I know if the outer CV joint on my Volvo S70 is faulty?

The most common sign is a clicking or knocking noise heard when making sharp turns, particularly under acceleration.

Do I have to replace the complete drive shaft if only the CV joint is worn?

No, on the Volvo S70 you can usually replace just the outer CV joint, provided the splines on the shaft itself are undamaged.

Why is the correct tooth count on the ABS ring important?

The ABS sensor reads the teeth on the ring to measure wheel speed. An incorrect tooth count prevents the ABS system from functioning correctly and triggers the warning light.

Are the boot and grease included when I buy an outer CV joint?

Yes, our CV joint kits are normally supplied complete with a CV boot, grease, clamps and mounting hardware.

Can a split CV boot cause the joint to fail?

Yes, if the boot splits, the lubricating grease escapes and dirt enters, which destroys the joint's bearing surfaces in a very short time.

How do I find the exact right CV joint for my S70?

Select your car's make, model and engine. That is the most reliable way to filter for parts that match your vehicle's specific technical specifications.

Is it difficult to replace an outer CV joint yourself?

It requires certain tools and mechanical experience, as the joint fits tightly into the wheel hub and requires dismantling some suspension components.