Outer CV joints for Volvo S80 T6 AWD

Discover our range of outer CV joints developed for the Volvo S80 T6 AWD. Maintaining the all-wheel-drive system demands durable components engineered for heavy loads. Whether you drive...

Products for Outer CV joints for Volvo S80 T6 AWD

6 products
1 - 6 of 6
Item no.:0567604
  • Position: Outer
  • Seal diameter: 57,5 mm
  • Inner splines: 26
  • Outer splines: 40
Item no.:0547986
  • Position: Outer
  • Seal diameter: 57,5 mm
  • Inner splines: 27
  • Outer splines: 40
Item no.:656351
  • Position: Rear, Outer
  • Seal diameter: 56 mm
  • Inner splines: 29
  • Diameter: 56 mm
  • ABS teeth: 88
Item no.:0507403
  • Position: Outer
  • Inner splines: 22
  • Outer diameter: 84 mm
  • Splines wheel side: 36
  • ABS teeth: 44
Item no.:0571420
  • Position: Outer
  • Inner splines: 29
  • Outer diameter: 73 mm
  • Splines wheel side: 36
  • ABS teeth: 44
Item no.:358260
  • Position: Front, Outer
  • Total length: 118 mm

Outer CV joints for Volvo S80 T6 AWD

When it comes to the Volvo S80 T6 AWD, the drivetrain is a critical component for handling the potent T6 engine in combination with the advanced all-wheel-drive system. The outer CV joint plays a vital role in transferring torque from the gearbox and drive shaft out to the wheels, while simultaneously accommodating steering angles and suspension travel. Because the T6 AWD model produces substantially more power than standard versions, the CV joints are subjected to heavy loads, especially under hard acceleration and through sharp corners. Choosing high-quality spare parts is therefore fundamental to your car's longevity and driving safety. We supply components specifically dimensioned to meet the demands of a high-performance saloon like the Volvo S80 T6 AWD.

What does the outer CV joint do on a Volvo S80 T6 AWD?

The outer CV joint is located at the outboard end of the drive shaft, right at the wheel hub. Its primary job is to allow power transmission even when the wheels are turned for steering. On a Volvo S80 T6 AWD, this is especially complex because the system must balance power between the front and rear axles via the AWD drivetrain. As a constant velocity joint, it rotates at a steady speed regardless of angle. Without a properly functioning outer CV joint, power transfer would become jerky and could ultimately result in total failure, leaving the vehicle with no drive to that wheel. This component is the vital link between engine power and the road, making it indispensable to your car's dynamics.

Common signs of wear

The most classic symptom of a worn outer CV joint is a clicking or knocking noise when cornering, particularly under load. On a Volvo S80 T6 AWD, this is often noticeable during parking manoeuvres or when pulling out of junctions. Another symptom is vibration felt through the steering wheel or chassis during acceleration, indicating excessive internal play within the joint. If the protective CV boot has split, grease escapes and road dirt gets in, dramatically accelerating wear through friction and corrosion. Addressing these symptoms promptly helps prevent secondary damage to wheel bearings or other drivetrain car parts that can be expensive to fix.

How to choose the correct outer CV joint

Finding the correct replacement part for your Volvo S80 T6 AWD requires care. Variations occur depending on model year and specific chassis numbers, especially since T6 variants often feature sturdier dimensions than smaller engine models. The most reliable method is to select your car's make, model and engine in our vehicle picker. It is also wise to check the spline count on both the inner and outer ends of the joint if you want to be completely certain, as this can differ between drive shaft designs. At CVJoint24, we have structured our cataloguing so you can easily navigate our range of spare parts and ensure the replacement you order fits your car's exact specifications. Accurate fitment is the key to a straightforward repair.

Related parts to check

We recommend also checking these exact pages for the same car when working on the outer CV joint:

When a drivetrain component shows wear, adjacent parts on the same car frequently need inspecting too. Comparing these exact pages for the Volvo S80 T6 AWD makes it easier to determine whether the issue lies in the outer CV joint itself or another connected section of the power transmission system.

This is particularly relevant on models where vibrations, play and noises can transfer between multiple driveline parts. A quick check of related categories reduces the risk of replacing the correct component type while overlooking an adjacent part affecting the same problem.

Why buy from CVJoint24?

CVJoint24 is your Swedish driveline specialist, supplying power transmission components from our warehouse in Helsingborg, Sweden across the European Union. We combine a comprehensive range with specialised technical expertise, making us the natural choice for discerning car owners. When shopping with us, you receive reliable spare parts backed by our accurate fitment data to ensure the part matches your Volvo S80 T6 AWD. We understand how important it is to get your vehicle back on the road quickly, which is why we dispatch stocked items with fast delivery. Our goal is to supply the right part first time, saving you both time and workshop costs while keeping your Volvo in peak mechanical condition.

Frequently asked questions about outer CV joints for Volvo S80 T6 AWD

How do I know if the outer CV joint on my Volvo S80 T6 AWD is failing?

The most common symptom is a clicking or knocking sound from the front end when turning, especially under acceleration. You may also feel vibrations through the steering wheel.

Can I replace just the outer CV joint, or do I need to replace the entire drive shaft?

On the Volvo S80 T6 AWD, you can usually replace just the outer CV joint, provided the rest of the drive shaft is straight and undamaged.

Do all outer CV joints fit every Volvo S80 model?

No, the T6 AWD often features sturdier splines and different dimensions compared to front-wheel-drive models. Always select your car's exact make, model and engine to ensure you get the right part.

What is included in an outer CV joint kit from you?

Our kits typically contain the CV joint itself, a vehicle-specific CV boot, high-quality grease, circlips and all the necessary clamps for installation.

Why does the CV joint fail specifically on the T6 AWD?

The high power output of the T6 engine combined with the strain of all-wheel drive puts significant load on the joints. If the CV boot splits, dirt enters and rapidly wears out the joint.

How quickly can I have my new CV joint delivered?

We offer fast delivery across the EU on in-stock parts, helping you get your Volvo S80 T6 AWD back on the road without delay.