Peugeot 2008

Spare parts and drivetrain components for Peugeot 2008.

Products for Peugeot 2008

65 products
25 - 48 of 65
Item no.:0607086
  • Total length: 116 mm
Item no.:353920
  • Position: Front, Outer
  • Inner splines: 34
  • Splines wheel side: 25
  • Seal diameter: 54,8 mm
  • Thread size: M24X1,5
Item no.:2199937
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 940 mm
  • Joint diameter: 86 mm
Item no.:0571658
  • Position: Front, Outer
  • Inner splines: 34
  • Seal diameter: 48,1 mm
  • Outer splines: 21
  • Thread size: M20X1,5
Item no.:3537493
  • Position: Front, Outer
  • Inner splines: 34
  • Seal diameter: 58,5 mm
  • Outer splines: 25
  • Thread size: M24X1,5
Item no.:0672385
  • Total length: 94 mm
Item no.:0655182
  • Position: Front
Item no.:1180284
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 670 mm
  • Thread size: M24x1.5
Item no.:394018
  • Position: Front
Item no.:0523098
  • Position: Outer
  • Inner splines: 23
  • Splines wheel side: 25
  • Outer diameter: 77,4 mm
  • Outer splines: 25
Item no.:244644
  • Position: Front right, Inner
  • Inner splines: 34
  • Splines gearbox side: 22
  • Seal diameter: 30 mm
  • Total length: 188 mm
Item no.:148233
  • Position: Front left, Inner
  • Inner splines: 34
  • Splines gearbox side: 24
  • Seal diameter: 40 mm
  • Total length: 151 mm
Item no.:240131
  • Position: Front right, Inner
  • Inner splines: 34
  • Seal diameter: 29,8 mm
  • Total length: 88 mm
  • Outer splines: 37
Item no.:246376
  • Position: Front right, Inner
  • Inner splines: 34
  • Splines gearbox side: 24
  • Seal diameter: 29,8 mm
  • Total length: 379 mm
Item no.:146518
  • Position: Front left, Inner
  • Inner splines: 34
  • Splines gearbox side: 24
  • Seal diameter: 40 mm
  • Total length: 142,5 mm
Item no.:245854
  • Position: Front right, Inner
  • Inner splines: 34
  • Splines gearbox side: 24
  • Seal diameter: 29,8 mm
  • ABS teeth: 34
Item no.:352034
  • Position: Front, Outer
  • Inner splines: 34
  • Splines wheel side: 25
  • Seal diameter: 58,5 mm
  • Total length: 55,5 mm
Item no.:355720
  • Position: Front, Outer
  • Inner splines: 25
  • Splines wheel side: 25
  • Seal diameter: 56 mm
  • Thread size: M24X1,5
Item no.:7301034
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 626 mm
  • Joint diameter: 86 mm
Item no.:119106
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 25
  • Total length: 642 mm
  • Diameter 1: 77 mm
Item no.:115512
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 685 mm
Showing 25–48 of 65 products

Drivetrain for Peugeot 2008

The Peugeot 2008 is a popular crossover that combines the agility of a compact car with the robustness of an SUV. Maintaining these characteristics demands a reliable drivetrain that efficiently transfers the engine's power to the road. The drivetrain in a Peugeot 2008 is subjected to severe stresses, especially during stop-and-start urban driving and over uneven surfaces. As driveline specialists, we supply components that meet or exceed original equipment specifications, ensuring your car retains its signature handling and safety for many thousands of kilometres to come.

Maintaining your drivetrain is not merely a matter of ride comfort; it is vital for road safety. A worn component can, in the worst-case scenario, lead to a complete breakdown at the roadside. By selecting the correct spare parts from an expert, you extend your car's service life and prevent costly consequential damage to the gearbox and suspension. We focus on providing parts engineered to withstand demanding European road conditions, where salt and moisture accelerate corrosion and wear on moving components.

How the drivetrain is engineered on the Peugeot 2008

In most specifications, the drivetrain on a Peugeot 2008 is front-wheel drive, meaning power travels from the engine through the gearbox and out to the front wheels via two drive shafts. Each drive shaft is fitted with two joints: an inner joint at the gearbox and an outer joint at the wheel hub. This design enables the front wheels to steer and absorb bumps while maintaining constant power delivery. Certain versions and configurations may also feature a propeller shaft, which is essential for longitudinal power transmission.

The system is precision-engineered to minimise energy losses and vibrations. The drive shafts are correctly dimensioned to manage the torque generated by the engine, whether it is an economical diesel or a lively petrol unit. As the Peugeot 2008 is frequently driven as a versatile family car, the components are engineered to cope with varying loads and changing road surfaces. Understanding this layout is key to pinpointing which part needs replacing when unusual noises or vibrations arise.

Common faults and symptoms

The most frequent sign that an outer CV joint on a Peugeot 2008 is failing is a distinct clicking or knocking noise when taking sharp turns at low speed. This is usually caused by a split CV boot, allowing road grit to penetrate and lubricating grease to escape. If ignored, the joint will eventually seize or fail completely. Meanwhile, vibrations felt through the steering wheel or chassis under acceleration typically point to worn inner constant velocity joints or an unbalanced drive shaft.

Another symptom to watch for is gear oil weeping around the gearbox seals, or grease splattered across the inner face of the wheel rim. If your car is equipped with a prop shaft, an out-of-balance shaft often manifests as a deep droning noise or vibrations that increase with road speed rather than engine revs. Addressing these symptoms early usually means you only need to replace an individual component rather than a complete driveshaft assembly, saving both time and money.

Common parts to replace on the Peugeot 2008

Across the Peugeot 2008 drivetrain, certain parts see particularly high demand. Our stock is tailored to meet these needs and ensure prompt availability of the right car parts. The primary categories for this model include:

  • Drive shaft: We stock several drive shaft variants for the Peugeot 2008, covering both right-hand and left-hand sides for different engine options.
  • Outer CV joint: There are multiple outer CV joints available, which are common wear items after high mileage or when boots have failed.
  • Propeller shaft: For specific drivetrain configurations, we also supply the Peugeot 2008 propeller shaft to resolve longitudinal driveline issues.

These parts are critical to vehicle operation. A drive shaft is far more than a solid bar of steel; it is a precisely balanced assembly that must spin at high speeds without inducing resonance. Similarly, an outer CV joint requires high-precision internal bearing tracks to withstand extreme angles at full steering lock.

Finding the right part for your Peugeot 2008

Navigate directly to the appropriate section for the Peugeot 2008:

When troubleshooting a model with multiple possible driveline faults, it pays to start in the correct category straight away. Reviewing the specific sub-assemblies for the Peugeot 2008 makes it easier to tell whether the issue lies in a drive shaft, CV joint or propeller shaft, directing you to the parts that match your symptoms and vehicle specification.

Identifying the exact component for your Peugeot 2008 can sometimes be tricky, as parts vary according to model year, engine variant and transmission type. The most reliable way to browse our catalogue is to filter by your car's make, model and engine. This narrows our product range down to components that are fully compatible with your vehicle, eliminating any guesswork regarding spline counts, shaft lengths and flange types.

If you are unsure whether you need a complete replacement shaft or just an outer joint, inspect the CV boots thoroughly. A torn or perished boot is a sure sign that the joint will soon require replacement. Also check whether your vehicle requires an integrated ABS reluctor ring on the joint. Our accurate technical database is designed to give you complete confidence in choosing the right part the first time.

Why buy from CVJoint24?

CVJoint24 is your dedicated driveline specialist, backed by our central Swedish warehouse in Helsingborg and delivering right across the EU. Unlike general car parts retailers, we focus squarely on automotive drivetrains. This specialization allows us to provide unbeatable product depth and practical technical expertise. When ordering parts for your Peugeot 2008 from us, you receive components chosen specifically for their durability and exact fitment. We know that accurate parts are crucial for your car's long-term reliability.

Our commitment to precise vehicle data and relevant parts makes finding the correct product faster and simpler. We combine the specialist knowledge of a dedicated Swedish driveline centre with an intuitive online store. With our focused range of drive shafts, CV joints and propeller shafts, CVJoint24 is the trusted choice for drivers and garages who refuse to compromise on quality.

Frequently asked questions about Peugeot 2008 drivetrains

How do I know whether the drive shaft or the CV joint is failing on my Peugeot 2008?

A clicking noise when cornering usually indicates a worn outer CV joint. If you feel pronounced vibrations during acceleration, especially at higher speeds, it is more likely that the drive shaft itself or the inner joint is worn.

Do all drive shafts fit every Peugeot 2008 model?

No, there are differences depending on whether your car has a manual or automatic gearbox, as well as which engine is fitted. Always select your vehicle's make, model and engine variant in our search filter to find the exact replacement part.

Why is it important to replace a split CV boot quickly?

The CV boot protects the constant velocity joint from dirt, water and road grit whilst keeping the lubricating grease inside. A split boot quickly leads to premature joint wear, which costs considerably more to fix than simply fitting a new boot.

Is a propeller shaft available for the Peugeot 2008?

Yes, for certain specific versions of the Peugeot 2008, propeller shafts are listed in our range. However, this is mainly for models equipped with specific drivetrains designed for improved traction.

How many splines does a CV joint have on a Peugeot 2008?

The number of splines (teeth) can vary between different Peugeot 2008 specifications. This is one of the technical dimensions you can verify against your car's exact model and engine variant to ensure the joint fits your wheel hub and gearbox correctly.

Are your car parts equivalent to original equipment (OE)?

Yes, our components are manufactured to match or exceed the technical specifications of original equipment, ensuring dependable safety and long service life for your Peugeot 2008.