Peugeot 306

Spare parts and drivetrain components for Peugeot 306.

Products for Peugeot 306

82 products
25 - 48 of 82
Item no.:2179226
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 21
  • Total length: 875 mm
  • Joint diameter: 87 mm
Item no.:2154583
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 21
  • Total length: 835 mm
  • Joint diameter: 77 mm
Item no.:0593755
  • Position: Outer
  • Inner splines: 22
  • Seal diameter: 58 mm
  • Outer splines: 25
  • ABS teeth: 48
Item no.:1184412
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 611 mm
  • ABS teeth: 48
Item no.:0306374
  • Position: Front
  • ABS teeth: 48
  • Inner diameter: 79 mm
  • Outer diameter: 99 mm
  • Width: 10 mm
Item no.:1132246
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 611 mm
Item no.:2195052
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 880 mm
Item no.:133889
  • ABS teeth: 48
  • Inner diameter: 79 mm
  • Outer diameter: 99 mm
  • Width: 10 mm
Item no.:3521494
  • Position: Outer
  • Inner splines: 34
  • Seal diameter: 55 mm
  • Outer splines: 25
  • ABS teeth: 29
Item no.:0660415
  • Total length: 116 mm
Item no.:392005
  • Position: Front
  • Seal ring diameter: 36,2 mm
Item no.:396130
  • Position: Front
Item no.:0997246
Item no.:3535525
  • Position: Outer
  • Inner splines: 34
  • Seal diameter: 56 mm
  • Outer splines: 25
  • ABS teeth: 48
Item no.:3537208
  • Position: Outer
  • Inner splines: 23
  • Seal diameter: 56 mm
  • Outer splines: 25
  • ABS teeth: 29
Item no.:3524874
  • Position: Outer
  • Inner splines: 34
  • Seal diameter: 56 mm
  • Outer splines: 25
  • Thread size: M20X1,5
Item no.:2110159
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 886 mm
  • ABS teeth: 29
Item no.:359073
  • Position: Front, Outer
  • Inner splines: 34
  • Splines wheel side: 25
  • Seal diameter: 54,8 mm
  • Thread size: M24X1,5
Item no.:1156078
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 605 mm
  • ABS teeth: 48
Item no.:3590926
  • Position: Front, Outer
  • Inner splines: 34
  • Splines wheel side: 25
  • Seal diameter: 58 mm
  • ABS teeth: 29
Item no.:1199966
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 600 mm
  • ABS teeth: 48
Item no.:2198713
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 887 mm
  • ABS teeth: 48
Item no.:1127756
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 608 mm
  • Joint diameter: 86,5 mm
Item no.:2182961
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 885 mm
  • Joint diameter: 86,5 mm
Showing 25–48 of 82 products

Drivetrain for Peugeot 306

The Peugeot 306 has long been a favourite on European roads thanks to its blend of comfort and engaging handling. To preserve these driving qualities, it is essential that the car's drivetrain operates flawlessly. The drivetrain is the crucial link transferring engine power all the way to the wheels, and on a front-wheel-drive car like the Peugeot 306, these components endure heavy loads under every acceleration and turn. As many 306 models have now reached a considerable age and mileage, original transmission parts often begin to show signs of fatigue. Replacing worn components in good time is not merely a matter of comfort, but also of safety and preventing costly gearbox repairs. At CVJoint24, we are proud to be a Swedish driveline specialist offering an extensive, carefully selected range for this classic Peugeot model.

How the Peugeot 306 drivetrain is designed

The technical layout of the drivetrain on a Peugeot 306 is engineered to be both efficient and compact, typical of French cars from this era. The engine is transversely mounted, meaning power is delivered via two drive shafts of differing lengths. The left-hand drive shaft is shorter and runs directly from the gearbox to the wheel, whilst the right-hand shaft is substantially longer. To cope with the additional length and suppress vibrations, the right shaft is often split and supported by a centre bearing mounted on the engine block. Each Peugeot 306 drive shaft is fitted with two joints: an inner joint allowing axial movement as the suspension travels, and an outer joint enabling steering. These joints are packed with specialised grease and sealed by CV boots. Furthermore, many models feature an ABS ring for the Peugeot 306 pressed onto the outer joint, which forms an integral part of the vehicle's braking safety system.

Common faults and symptoms

Diagnosing drivetrain issues on your Peugeot 306 requires paying close attention to unusual noises and vibrations. One of the most frequent problems is a worn outer CV joint on the Peugeot 306, typically caused by a split protective boot allowing road dirt to enter and grease to escape. This produces a telltale clicking sound when driving on full steering lock. If you instead experience shaking or shuddering that worsens with vehicle speed or under hard acceleration, this points to an unbalanced drive shaft or worn inner constant velocity joints. Another symptom specific to ABS-equipped models is a pulsating brake pedal at low speeds, or an illuminated ABS warning light. This is frequently caused by a cracked or corroded ABS ring feeding erratic signals to the ECU. By acting promptly on these symptoms, you can often replace an individual component before the entire driveline is compromised.

Common replacement parts for Peugeot 306

In our online shop, we have organised our range to help you locate the exact parts you need for your repair without delay. We stock a comprehensive selection for the Peugeot 306 across several vital subcategories. Our primary focus is on complete drive shafts, covering everything from the early 1.4-litre petrol engines up to the sporty GTi models and torquey diesels. Where only the joint itself is worn, we provide high-grade outer CV joints. Additionally, we stock 16 different types of ABS rings, which are frequently required for cars exposed to harsh winter road conditions. Key categories for your car include:

  • Drive shafts for Peugeot 306 – Complete assemblies for straightforward installation.
  • Outer CV joints for Peugeot 306 – Premium joints engineered to eliminate knocking noises.
  • ABS rings for Peugeot 306 – Precision reluctor rings for a dependable braking system.

By maintaining this depth of stock, we ensure that we can supply the correct component regardless of your specific 306 variant.

Finding the right part for your Peugeot 306

Navigate to the specific component category for your Peugeot 306:

When troubleshooting driveline problems, it pays to start in the relevant category straight away. Comparing the available component areas for the Peugeot 306 makes it straightforward to distinguish between drive shaft, CV joint or prop shaft issues and proceed directly to the parts matching your symptoms and vehicle specification.

To ensure total confidence when ordering, use our intuitive vehicle selector to filter parts by your Peugeot 306 make, model and engine variant. However, manufacturers occasionally introduced mid-production revisions within the same model year. We therefore recommend checking technical specifications such as tooth counts on ABS rings or spline counts on driveshafts. Counting the splines or teeth on your original part before ordering is an excellent way to guarantee 100% fitment. If you are unsure which part of your drivetrain requires replacement, our specialist team is on hand to help you identify the right solution for your car.

Why choose CVJoint24

Buying from CVJoint24 means partnering with specialists who understand vehicle drivetrains inside out. As a Swedish driveline specialist dispatching directly across the EU, we do not aim to be a generalist retailer; our focus is firmly on drive shafts, constant velocity joints and associated hardware. This dedicated expertise allows us to provide higher-quality technical advice and an impeccably curated inventory. Proper fitment is paramount, which is why we partner exclusively with verified OE-quality manufacturers. For your Peugeot 306, you can rely on robust parts engineered for daily driving demands. Combining technical knowledge with fast European delivery, we make servicing your driveline straightforward and reliable.

Frequently Asked Questions about Peugeot 306 Drivetrain & Spare Parts

How do I know if the drive shaft on my Peugeot 306 needs replacing?

The most common signs are vibrations under acceleration or a clicking noise when cornering. If you notice the car shaking at certain speeds, this can indicate an imbalance or wear in the drive shaft's inner joints.

Does the same CV joint fit all Peugeot 306 models?

No, CV joints vary depending on engine size, gearbox and whether the vehicle is fitted with ABS. It is important to check the spline count and the number of teeth on the ABS ring before ordering.

Why has the ABS warning light come on in my Peugeot 306?

A very common cause is that the ABS ring on the drive shaft has cracked due to corrosion. When the ring cracks, the gap to the sensor changes, causing the system to lose its signal and illuminate the warning light.

Can I replace just the outer CV joint instead of the entire shaft?

Yes, if the shaft itself is straight and in good condition, you can save money by replacing just the outer CV joint. We offer 17 different outer joints specifically for the Peugeot 306.

What is the difference between an inner and an outer CV joint?

The outer joint sits at the wheel and accommodates steering angles, whilst the inner joint sits at the gearbox and handles the vertical movement of the suspension.

How do I find the right spare parts for my car?

Select your Peugeot 306 model, year and engine variant to filter the 73 parts technically matched to your specific car, minimising the risk of ordering the wrong part.

Is it necessary to replace the CV boot if it is cracked?

Yes, absolutely. A cracked boot allows grease to escape and dirt to enter, which rapidly destroys the CV joint. Replacing the CV boot promptly is inexpensive insurance against costly failures.