Peugeot 308 CC

Spare parts and drivetrain components for Peugeot 308 CC.

Products for Peugeot 308 CC

48 products
25 - 48 of 48
Item no.:3589999
  • Position: Outer
  • Inner splines: 34
  • Seal diameter: 58,5 mm
  • Outer splines: 25
  • ABS teeth: 29
Item no.:1191773
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 635 mm
  • Joint diameter: 86 mm
Item no.:3530314
  • Position: Front, Outer
  • Inner splines: 34
  • Seal diameter: 58,5 mm
  • Outer splines: 25
  • Thread size: M24X1,5
Item no.:1133685
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 626 mm
  • Joint diameter: 86 mm
Item no.:148110
  • Position: Front left, Inner
  • Inner splines: 34
  • Splines gearbox side: 24
  • Seal diameter: 40 mm
  • Total length: 142,5 mm
Item no.:242645
  • Position: Front right, Inner
  • Inner splines: 34
  • Splines gearbox side: 24
  • Seal diameter: 29,8 mm
  • Total length: 453 mm
Item no.:140907
  • Position: Front left, Inner
  • Inner splines: 34
  • Splines gearbox side: 26
  • Seal diameter: 30,2 mm
  • Total length: 150 mm
Item no.:0651227
  • Position: Front
Item no.:0500535
  • Position: Front, Outer
  • Inner splines: 39
  • Seal diameter: 58 mm
  • Outer splines: 25
  • Thread size: M24X1,5
Item no.:1196860
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 25
  • Inner splines: 39
  • Total length: 638 mm
Item no.:2175090
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 25
  • Inner splines: 39
  • Total length: 959 mm
Item no.:1169038
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 25
  • Total length: 619 mm
Item no.:245879
  • Position: Front right, Inner
  • Inner splines: 39
  • Splines gearbox side: 37
  • Seal diameter: 32 mm
  • Total length: 494,5 mm
Item no.:356113
  • Position: Front, Outer
  • Inner splines: 34
  • Splines wheel side: 25
  • Seal diameter: 54,8 mm
  • Thread size: M24X1,5
Item no.:1130270
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 25
  • Total length: 617 mm
  • Joint diameter: 100 mm
Item no.:2192721
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 25
  • Total length: 955 mm
Item no.:1133707
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 25
  • Total length: 650 mm
  • Thread size: M24x1.5
Item no.:0972793
  • Inner diameter: 35 mm
  • Outer diameter: 62 mm
Item no.:1149991
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 642 mm
  • Joint diameter: 86 mm
Item no.:141835
  • Position: Front, Inner
  • Inner splines: 34
  • Splines gearbox side: 37
  • Seal diameter: 42 mm
  • Total length: 153 mm
Item no.:350203
  • Position: Front, Outer
  • Inner splines: 34
  • Splines wheel side: 25
  • Seal diameter: 58,5 mm
  • Total length: 55,5 mm
Item no.:3550722
  • Position: Front, Outer
  • Inner splines: 39
  • Seal diameter: 58 mm
  • Outer splines: 28
  • ABS teeth: 48
Item no.:359941
  • Position: Outer
  • Inner splines: 39
  • Seal diameter: 58,5 mm
  • Outer splines: 25
  • Thread size: M24X1,5
Item no.:253800
  • Position: Outer
  • Inner splines: 34
  • Seal diameter: 59 mm
  • Outer splines: 25
  • Thread size: M20X1,5
Showing 25–48 of 48 products

Drivetrain for Peugeot 308 CC

Owning a Peugeot 308 CC delivers a unique driving experience where comfort and performance take centre stage, especially during the warmer months with the roof down. To keep this driving feel at its best, a flawless drivetrain is essential to transfer engine power smoothly to the road. The drivetrain in a convertible often faces specific stresses due to the car's weight distribution and reinforced chassis structure. Here at cvjoint24.com, you will find a specialist range tailored precisely to this model. We understand that every component, from the smallest CV boot to the complete drive shaft, must deliver top-tier quality to prevent unnecessary wear across the rest of the car.

Our focus is on supplying car parts that do not just fit physically, but also match the exact technical specifications for your Peugeot 308 CC. With carefully selected products in our catalogue, we ensure you find the right solution for your needs. Maintaining your drivetrain is an investment in your car's longevity, ensuring that power transfer remains seamless, efficient, and free from vibration.

How the drivetrain works on the Peugeot 308 CC

The drivetrain on a Peugeot 308 CC is an engineered front-wheel-drive layout paired with a transverse engine. Power leaves the gearbox and is distributed via the differential to the two drive shafts. Each drive shaft for Peugeot 308 CC features two joints: an inner joint connecting to the gearbox and an outer CV joint at the wheel hub. This design enables the front wheels to drive the car forward whilst simultaneously steering, placing exceptional demands on component articulation and strength.

The outer CV joint is particularly critical as it must handle sharp steering angles under load while transmitting torque smoothly. The inner joint, meanwhile, absorbs the axial length changes caused by suspension movement over bumps and dips. The entire system is sealed by rubber CV boots packed with specialist grease, which are vital for preventing dirt and water from invading the precision bearings. A fully functioning drivetrain is essential to eliminate vibrations and ensure that your traction control and electronic stability programmes operate correctly.

Common faults and symptoms

There are several clear warning signs when the drivetrain components on your Peugeot 308 CC begin to wear. One of the most typical symptoms is a distinct clicking or knocking noise on full steering lock, which usually points to a failing outer CV joint for Peugeot 308 CC. If the noise speeds up with road speed when cornering, the internal ball bearings have begun to wear into their raceways. Another frequent issue is shuddering or vibration felt through the steering wheel or the cabin during acceleration, often traced to worn inner CV joints or an unbalanced driveshaft.

It is equally important to inspect the CV boots regularly. If a boot tears or perishes, the protective grease is flung out and road grit gets in, causing rapid failure of the joint. If you spot grease splattered on the inside of the wheel rim or suspension strut, act immediately. Ignoring these warning signs can result in far more costly repairs; in worst-case scenarios, a seized CV joint can damage the gearbox or wheel bearings. Spotting these issues early saves both time and workshop labour costs.

Common parts to replace on the Peugeot 308 CC

When servicing the driveline on this model, drive shafts and outer CV joints are the components most frequently in demand. In our catalogue for Peugeot 308 CC, we stock multiple drive shaft variants and different outer constant velocity joints. Peugeot utilised various petrol and diesel engines alongside manual and automatic gearboxes, which means shaft lengths and spline counts vary considerably across the model range. It is therefore vital to select a replacement part engineered for your exact configuration.

Here are the key categories for your vehicle:

  • Drive shafts for Peugeot 308 CC
  • Outer CV joints for Peugeot 308 CC

Alongside these main assemblies, it is wise practice to inspect related hardware such as ABS reluctor rings and hub retaining bolts during the job. Fitting a complete drive shaft is frequently the most economical route for extensive wear, as you receive new inner and outer joints alongside factory-fitted CV boots, saving considerable fitting time and minimising the risk of repeat failures.

Finding the right parts for your Peugeot 308 CC

Navigate directly to the appropriate section for your Peugeot 308 CC:

On a vehicle with several possible driveline issues, selecting the right sub-category straight away makes all the difference. By comparing the exact component sections for Peugeot 308 CC, it is straightforward to distinguish between faults in a drive shaft, a CV joint or a propeller shaft, and quickly find the page matching your symptoms and fitment.

Locating the exact replacement part for a Peugeot 308 CC can be tricky without precise specifications, as subtle differences dictate whether an item fits. A few millimetres of shaft length or a single tooth difference on the splines can separate a manual car from an automatic. To ensure an exact match, use our model selector to filter by your car's make, model, and engine variant, showing you only the parts confirmed for your vehicle.

We always recommend double-checking technical specifications such as overall length and spline count against your original part where possible, though our database is built to get you the correct recommendation first time. As a specialist in drivetrain components, we have matched each product accurately to vehicle chassis codes and engine designations. Whether you require a full driveshaft or just an individual joint, you can trust our categorisation to guide you straight to the right part for your Peugeot 308 CC.

Why buy from cvjoint24.com?

CVJoint24 is no generic car-parts retailer; we are the international store of a Swedish driveline specialist, sending high-grade transmission components straight from our central warehouse in Helsingborg, Sweden, to customers across the EU. Our technical focus allows us to provide a depth of stock and expert know-how that general suppliers simply cannot match. When purchasing Peugeot 308 CC parts from us, you receive components engineered to endure harsh European roads and demanding driving conditions.

We combine the comprehensive inventory of a major distributor with the tailored focus of a dedicated specialist. By concentrating specifically on drive shafts, CV joints and boots, we ensure every part on our shelves meets stringent standards for durability and fitment. With accurate filtering by make, model and engine, swift EU dispatch, and committed customer support, CVJoint24 is the trusted choice for drivers who insist on safety, quality, and smooth performance.

Frequently Asked Questions about Drivetrain Parts for Peugeot 308 CC - Precision-Fit Spare Parts

How do I know if my Peugeot 308 CC needs a new drive shaft?

The most common signs are vibrations under acceleration or a persistent clicking noise when cornering. If vibrations are felt throughout the entire car rather than just through the steering wheel, it is often the inner joint of the drive shaft that is worn.

Why are there 12 different drive shafts available for Peugeot 308 CC?

The differences depend on whether the car has a manual or automatic gearbox, as well as its engine size. These factors affect the length of the shaft and the dimensions of the splines and connections.

Can I replace just the outer CV joint instead of the complete drive shaft?

Yes, if the rest of the shaft is in good condition and there are no vibrations when driving in a straight line, replacing just the outer CV joint may be sufficient. We stock 2 specific outer CV joints for the 308 CC.

What happens if a CV boot splits on my Peugeot?

If the CV boot splits, lubricating grease escapes and dirt enters. This causes rapid wear to the moving components of the joint, resulting in knocking noises and ultimately total failure if it is not replaced in time.

Is it difficult to find the right part for my car?

No, simply select your Peugeot 308 CC model and engine variant on our website to view all 14 compatible parts engineered to fit your specific vehicle.

Do your CV joint kits include everything needed for the replacement?

Yes, our outer CV joint kits are normally supplied complete with a CV boot, grease, clamps, and necessary hardware to ensure a correct, lasting installation.