Peugeot 406

Spare parts and drivetrain components for the Peugeot 406.

Products for Peugeot 406

62 products
25 - 48 of 62
Item no.:219375
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 25
  • Total length: 820 mm
  • ABS teeth: 48
Item no.:3596979
  • Position: Outer
  • Inner splines: 39
  • Seal diameter: 59 mm
  • Outer splines: 25
  • ABS teeth: 48
Item no.:114507
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 619 mm
  • ABS teeth: 48
Item no.:2141099
  • Position: Front right
  • Splines gearbox side: 23
  • Splines wheel side: 21
  • Total length: 695 mm
  • ABS teeth: 48
Item no.:7300955
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 619 mm
  • Joint diameter: 90 mm
Item no.:356558
  • Position: Front, Outer
  • Inner splines: 34
  • Splines wheel side: 25
  • Seal diameter: 58 mm
  • ABS teeth: 48
Item no.:694976
  • Position: Rear
  • Inner diameter: 30 mm
  • Outer diameter: 50 mm
  • Height: 12 mm
Item no.:148777
  • Position: Front left, Inner
  • Inner splines: 39
  • Splines gearbox side: 37
  • Seal diameter: 40 mm
  • Total length: 168,5 mm
Item no.:1122723
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 652 mm
  • ABS teeth: 48
Item no.:1151255
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 25
  • Total length: 670 mm
  • ABS teeth: 48
Item no.:213359
  • Position: Front right
  • Splines gearbox side: 23
  • Splines wheel side: 25
  • Total length: 817 mm
  • ABS teeth: 48
Item no.:2179361
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 909 mm
  • ABS teeth: 48
Item no.:3545252
  • Position: Outer
  • Inner splines: 39
  • Seal diameter: 59 mm
  • Outer splines: 25
  • ABS teeth: 48
Item no.:2168706
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 908 mm
  • ABS teeth: 29
Item no.:356993
  • Position: Front, Outer
  • Inner splines: 34
  • Seal diameter: 56 mm
  • Outer splines: 25
  • ABS teeth: 48
Item no.:2151656
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 905 mm
  • Joint diameter: 90 mm
Item no.:1186075
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 660 mm
  • ABS teeth: 48
Item no.:1107711
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 25
  • Total length: 621 mm
  • ABS teeth: 29
Item no.:2171811
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 25
  • Total length: 925 mm
  • ABS teeth: 29
Item no.:114105
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 619 mm
  • ABS teeth: 29
Item no.:7314309
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 25
  • Total length: 621 mm
  • Joint diameter: 100 mm
Item no.:7301283
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 624 mm
  • Joint diameter: 90 mm
Item no.:213031
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 25
  • Total length: 903 mm
  • Joint diameter: 100 mm
Item no.:7301280
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 25
  • Total length: 591 mm
  • Joint diameter: 100 mm
Showing 25–48 of 62 products

Drivetrain for Peugeot 406

The Peugeot 406 has been widely acclaimed for its balance of comfort and driving dynamics, but keeping those qualities alive requires a drivetrain in peak condition. Power transmission is at the very core of your car's movement, relying on multiple interlocking components that must operate in complete harmony. For the Peugeot 406, this means a system engineered to handle both the stop-start stress of city driving and the sustained loads of long motorway journeys. We have gathered a comprehensive range covering the most common requirements for this specific model series. By choosing the right components from our catalogue, you ensure that your vehicle remains safe, quiet, and efficient for many thousands of kilometres to come. A worn drivetrain can cause consequential damage to other vital assemblies, including gearbox bearings and suspension components. It is therefore vital to act proactively as soon as the first signs of imbalance or unusual noises appear on your Peugeot.

How the Peugeot 406 drivetrain is constructed

The Peugeot 406 relies on a proven front-wheel-drive architecture where engine torque is distributed via a transverse gearbox. The drivetrain primarily consists of two drive shafts transferring torque directly to the front wheels. Each shaft is fitted with two joints: an inner joint mounted at the gearbox and an outer joint seated into the wheel hub. The outer unit is a constant velocity joint (CV joint), a sophisticated component designed to transmit power smoothly while the road wheel steers and articulates with suspension movement. On many Peugeot 406 variants, the ABS ring is pressed directly onto the outer CV joint, making it an integral part of the vehicle's braking safety system. The entire assembly is shielded by rubber CV boots packed with specialised grease. If a boot tears, moving parts are exposed to road grime, water, and salt, which quickly destroys the precision-ground raceways inside the joints.

Common faults and symptoms

There are several telltale signs that your Peugeot 406 drivetrain is nearing the end of its service life. One of the most classic symptoms is a rhythmic clicking or knocking noise clearly audible when cornering on full lock at low speeds. This almost always points to a worn outer CV joint. If you instead experience vibrations felt through the steering wheel or floor pan, particularly under brisk acceleration, this typically indicates pitted tracks in an inner joint or an out-of-true drive shaft. Another common issue specific to the Peugeot 406 involves the ABS system. An illuminated ABS warning light, or an ABS pedal pulsing during gentle braking on dry tarmac, is frequently caused by a cracked ABS ring due to corrosion expanding beneath it. Ignoring these warning signs can ultimately result in complete component failure and a roadside breakdown.

Common parts to replace on the Peugeot 406

When it is time for repairs, certain items are replaced far more frequently than others on this platform. In our catalogue you will find a broad selection of parts tailored specifically to the Peugeot 406. We supply the following primary categories:

  • Drive shafts for Peugeot 406
  • Outer CV joints for Peugeot 406
  • ABS rings for Peugeot 406

We often recommend inspecting the condition of the entire shaft whenever the suspension is dismantled, as installing a complete driveshaft assembly is often more cost-effective than replacing individual joints when multiple sections show wear. Replacing worn components promptly not only saves money in the long run but also preserves the vehicle's original driving characteristics.

How to find the correct part for your Peugeot 406

Proceed to the appropriate category for the Peugeot 406:

On a vehicle with various drivetrain configurations, it pays to start in the correct section immediately. By comparing the exact component areas for the Peugeot 406, it is simpler to distinguish between drive shaft, CV joint, or propeller shaft issues and navigate to the parts that match your symptoms and fitting requirements.

Sourcing replacement parts can sometimes seem daunting, especially since the Peugeot 406 was manufactured with diverse technical specifications throughout its production run. Variations exist in ABS ring tooth counts (commonly 29 or 48 teeth), overall drive shaft lengths, and spline tooth counts at either end of the shaft. To ensure absolute confidence in your purchase, simply select your car's make, model, and engine variant in our store selector to filter for components verified to suit your exact setup. We also suggest visually inspecting your existing part where possible, or cross-referencing against the technical drawings and specifications provided on our product pages. Our catalogue is one of the most comprehensive available for All car makes, minimising the risk of incorrect orders and unnecessary returns.

Why shop with CVJoint24

CVJoint24 is not just another general car parts outlet; we are the international store of a Swedish driveline specialist, focusing exclusively on drivetrain and power transmission components. Our philosophy centres on offering deep technical expertise and a product range with exceptional depth that general suppliers often lack. When you order from us, you receive components engineered to withstand harsh European roads and demanding seasonal conditions. We understand the necessity of precise fitment and sound technical advice, which is why we invest heavily in accurate model-selection data and clear technical guidance. With extensive stock for the Peugeot 406 dispatched from our central warehouse in Helsingborg, Sweden, we ensure rapid EU-wide delivery and dependable availability. Our goal is to provide car owners and garages with main-dealer reliability and quality at a substantially fairer price, combined with genuine specialist care.

Frequently Asked Questions about the Peugeot 406 Drivetrain

How do I know if my Peugeot 406 needs a new drive shaft?

The most common symptoms are vibrations under acceleration or noticeable knocking noises from the front end. If the vibrations persist even after wheel balancing, a worn drive shaft is often the cause.

Can I replace just the ABS ring on my Peugeot 406?

Yes, on most Peugeot 406 models you can replace just the ABS ring if the original has cracked or rusted through, provided the CV joint itself is still in good condition.

Why is there a clicking noise when I turn in my Peugeot 406?

A clicking or knocking noise when cornering is a classic sign of a worn outer CV joint. This occurs when the steel balls wear deep grooves into the internal tracks.

Do all drive shafts fit every Peugeot 406 model?

No, there are significant differences depending on the engine (such as 1.8, 2.0 or V6) and the gearbox. Always select your vehicle make, model and engine to ensure you find the correct part.

What happens if I drive with a split CV boot?

A damaged or split CV boot lets in dirt and water whilst allowing the grease to escape. This causes the constant velocity joint to wear out very quickly, which can result in complete failure.

How many teeth should the ABS ring have on a Peugeot 406?

It usually varies between 29 and 48 teeth depending on the model year and braking system. It is important to count the teeth on your original ring or match your car's exact model and engine specifications.