Peugeot 407

Spare parts and drivetrain components for the Peugeot 407.

Products for Peugeot 407

41 products
25 - 41 of 41
Item no.:0619828
  • Total length: 94 mm
Item no.:0671698
  • Total length: 116 mm
Item no.:1156828
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 28
  • Total length: 678 mm
  • Joint diameter: 92 mm
Item no.:149616
  • Position: Front left, Inner
  • Inner splines: 39
  • Splines gearbox side: 37
  • Seal diameter: 40 mm
  • Total length: 168,5 mm
Item no.:213151
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 973 mm
  • Joint diameter: 95 mm
Item no.:249462
  • Position: Front right, Inner
  • Inner splines: 39
  • Splines gearbox side: 37
  • Seal diameter: 32 mm
  • Total length: 494,5 mm
Item no.:142405
  • Position: Front left, Inner
  • Inner splines: 39
  • Seal diameter: 42,2 mm
  • Total length: 155,5 mm
  • Outer splines: 37
Item no.:0676780
  • Position: Front
Item no.:1142988
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 676 mm
  • Seal ring diameter: 59 mm
Item no.:1108381
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 642 mm
  • Joint diameter: 100 mm
Item no.:2134800
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 942 mm
  • Joint diameter: 100 mm
Item no.:1125361
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 28
  • Total length: 670 mm
  • Joint diameter: 86 mm
Item no.:395547
  • Position: Front
  • Seal ring diameter: 36,2 mm
Item no.:145763
  • Position: Front left, Inner
  • Inner splines: 34
  • Splines gearbox side: 26
  • Seal diameter: 30,2 mm
  • Total length: 150 mm
Item no.:633062
  • Position: Rear
Item no.:0605166
  • Total length: 113 mm
Item no.:633355
  • Position: Rear
Showing 25–41 of 41 products

Drivetrain for Peugeot 407

The Peugeot 407 is widely recognised for its ride comfort and sharp driving dynamics, but preserving that feel demands a drivetrain in first-rate condition. The drivetrain is the vital system that transfers engine power to the wheels, and on a Peugeot 407 this relies on a precise setup of mechanical components working together without unwanted friction or imbalance. At CVJoint24, we specialise in these exact components, making it straightforward for you to find the correct spare parts. With an extensive range for this model, we can solve most power transmission issues you might encounter.

Whether you require a complete drive shaft or a specific sensor ring, our aim is to supply parts that restore your car’s original performance and road safety. Keeping your drivetrain properly maintained is not merely about comfort; it also prevents consequential damage to the gearbox and suspension. By choosing the right parts from a specialist, you ensure that your Peugeot 407 remains dependable for many kilometres to come, whatever the weather conditions or driving style.

How the drivetrain is engineered on the Peugeot 407

The Peugeot 407 drivetrain uses a conventional front-wheel-drive layout in which the gearbox delivers power through two drive shafts of unequal length. Each Peugeot 407 drive shaft is fitted with an inner and an outer CV joint to accommodate both suspension travel and steering angles. The inner joint mounts to the gearbox and manages mainly axial movement, whereas the outer constant velocity joint operates under heavy loads, coping with wide articulation angles at full steering lock alongside continuous rotation on the road.

In addition, an ABS ring for the Peugeot 407 is fitted at the wheel hub or directly onto the outer CV joint to provide accurate speed signals to the braking system. This integration is essential for both the electronic stability programme (ESP) and the anti-lock brakes to function correctly. The materials used in these components are selected to handle the torque output of the Peugeot 407, particularly on high-torque HDi diesel variants. Understanding how these mechanical and electronic parts interact is key to a smooth-running vehicle and safe driving.

Common faults and symptoms

There are several telltale signs that drivetrain components on your Peugeot 407 are wearing out. One of the most frequent symptoms is a rhythmic clicking or knocking noise when cornering tightly at lower speeds. This almost invariably points to a worn outer CV joint on your Peugeot 407 or one that has lost its grease, often caused by a split CV boot letting in road dirt and moisture. If ignored, the joint can fail entirely, leaving the car with no drive.

Vibrations felt through the steering wheel or the entire body shell under acceleration, which fade once you ease off the throttle, typically point to imbalance or wear in a driveshaft or its inner joint. Another common issue on the Peugeot 407 is an ABS or ESP warning on the dashboard. This is frequently caused by a cracked ABS reluctor ring, split by rust swelling beneath it, which disrupts the sensor gap and cuts the signal. Diagnosing these faults early saves both time and money by letting you fix the root cause before it damages other parts of the transmission.

Common parts to replace on the Peugeot 407

Across our range for the Peugeot 407, certain components are requested time and again. We stock multiple drive shaft variations, reflecting the wide selection of engines and gearboxes available for the model. Note that the left and right sides differ in length and design; the longer right-hand shaft often includes a centre bearing to dampen vibrations. Alongside complete shafts, the outer CV joint is a routine replacement, and we supply various options to cover almost every variant.

We also stock two types of ABS rings, which offer a simple fix for braking-system errors without requiring a whole new joint. Replacing only the defective component—such as an individual CV joint or an ABS ring—is often a very cost-effective repair. However, it is vital to inspect the CV boots and retaining clips during every service, as a tiny tear in the rubber will quickly ruin an otherwise sound constant velocity joint with road grit and water. Our parts selection is carefully chosen to withstand demanding European road conditions on your Peugeot 407.

Find the right part for your Peugeot 407

Navigate directly to the relevant category for your Peugeot 407:

On a vehicle with several possible drivetrain issues, it pays to start in the right category straight away. Reviewing the dedicated subcategories for the Peugeot 407 makes it easier to tell drive shaft, CV joint and propeller shaft faults apart and head to the section that best matches your symptoms and fitment.

Before placing your order, we recommend checking technical details such as the tooth count on the ABS ring or the overall length of the drive shaft, especially where multiple versions exist for your engine code. If you have the original equipment (OEM) part number to hand, you can search for it directly in our store for a guaranteed match to your car's factory build.

Why shop with CVJoint24

As a Swedish driveline specialist, we offer dedicated technical know-how that general car-parts stores rarely match. We focus purely on driveline systems, giving us exceptional depth across our catalogue for models like the Peugeot 407. When ordering from us, you can trust that fitment has been verified and that every component is selected to cope with harsh northern European winters, where road salt and damp put extra strain on drivetrain parts.

Our customer support team possesses thorough knowledge of typical Peugeot 407 issues and can help you identify which part is causing your trouble. We appreciate how critical it is to get your vehicle back on the road quickly, which is why we maintain high stock levels and fast dispatch from our warehouse in Helsingborg, Sweden. With our focus on quality, specialist knowledge and value, CVJoint24 is the trusted supplier for both DIY mechanics and professional garages seeking dependable spare parts for their Peugeot.

Frequently Asked Questions about Drivetrain for Peugeot 407

How do I know if my Peugeot 407 needs a new drive shaft?

The most common signs are pronounced vibrations during acceleration or a persistent knocking noise from underneath the vehicle. If the vibrations stop when you release the accelerator, it is a strong indication that a drive shaft is worn.

Can I replace just the ABS ring on my Peugeot 407?

Yes, if the CV joint itself is in good condition, you can replace just the ABS ring. This is a common and cost-effective repair on the Peugeot 407 when the ABS light comes on due to a cracked ring.

Why is there a clicking noise when I turn in my Peugeot 407?

A clicking noise when turning is usually caused by a worn outer CV joint. It is typically the result of a split CV boot, which allows grease to leak out and dirt to enter the joint.

Do all drive shafts fit all Peugeot 407 models?

No, drive shafts vary depending on engine size, gearbox type (manual or automatic) and model year. Always select your vehicle's make, model and engine on cvjoint24.com to find the exact replacement part.

What is the difference between the inner and outer CV joint on the Peugeot 407?

The outer CV joint is located by the wheel and accommodates steering movement, whereas the inner joint sits by the gearbox and absorbs length variations as the suspension travels. They produce different symptoms when worn.

How does a split boot affect the CV joint on my Peugeot 407?

The boot protects the joint and retains the lubricating grease. If it splits, the joint is exposed to water and road grit, which rapidly destroys the precision-ground surfaces.