Subaru Legacy

Spare parts and drivetrain components for Subaru Legacy.

Products for Subaru Legacy

73 products
25 - 48 of 73
Item no.:131064
  • ABS teeth: 44
  • Inner diameter: 71 mm
  • Outer diameter: 82 mm
  • Width: 8 mm
Item no.:7238504
  • Position: Rear
  • Total length: 1,620 mm
  • Number of joints: 3
  • Number of centre bearings: 1
Item no.:0613443
  • Outer diameter: 21 mm
  • Diameter: 76 mm
Item no.:353996
  • Position: Front, Outer
  • Inner splines: 30
  • Seal diameter: 56 mm
  • Outer splines: 27
  • Thread size: M22X1,5
Item no.:359267
  • Position: Front, Outer
  • Inner splines: 22
  • Seal diameter: 56 mm
  • Outer splines: 27
  • Thread size: M22X1,5
Item no.:3594784
  • Position: Front, Outer
  • Inner splines: 23
  • Seal diameter: 52 mm
  • Outer splines: 27
  • Joint diameter: 78,4 mm
Item no.:645233
  • Position: Rear, Inner
  • Inner splines: 28
  • Splines gearbox side: 25
  • Seal diameter: 32 mm
  • Outer diameter: 71 mm
Item no.:642010
  • Position: Rear, Inner
  • Inner splines: 22
  • Splines gearbox side: 20
  • Seal diameter: 32 mm
  • Outer diameter: 75 mm
Item no.:0443273
  • Position: Front, Inner
  • Inner splines: 30
  • Outer diameter: 79 mm
Item no.:356220
  • Position: Front, Outer
  • Inner splines: 30
  • Seal diameter: 56 mm
  • Outer splines: 27
  • Thread size: M22X1,5
Item no.:346488
  • Position: Front, Inner
  • Inner splines: 21
  • Splines gearbox side: 22
  • Seal diameter: 32 mm
  • Outer diameter: 72 mm
Item no.:315411
  • Position: Front
  • Splines gearbox side: 25
  • Splines wheel side: 27
  • Total length: 681 mm
  • Joint diameter: 84 mm
Item no.:350898
  • Position: Front, Outer
  • Inner splines: 32
  • Seal diameter: 52 mm
  • Outer splines: 27
  • Thread size: M22X1,5
Item no.:419482
  • Position: Rear
  • Splines gearbox side: 25
  • Splines wheel side: 27
  • Total length: 795 mm
Item no.:3560616
  • Position: Outer
  • Inner splines: 32
  • Splines wheel side: 27
  • Outer diameter: 80,65 mm
  • Outer splines: 27
Item no.:623694
  • Total length: 1,683 mm
  • Outer diameter 1: 50 mm
  • Bolt circle diameter 1: 75,8 mm
  • Outer diameter 2: 35 mm
Item no.:0450608
  • Position: Inner
  • Inner splines: 30
  • Seal diameter: 40 mm
  • Outer splines: 25
  • Thread size: M22x1.5
Item no.:620210
  • Total length: 1,705 mm
  • Outer diameter 1: 50 mm
  • Bolt circle diameter 1: 76 mm
  • Outer diameter 2: 35 mm
Item no.:0204659
  • Total length: 1,618 mm
  • Outer diameter 1: 50 mm
  • Bolt circle diameter 1: 76 mm
  • Outer diameter 2: 35 mm
Item no.:349508
  • Position: Front, Inner
  • Inner splines: 30
  • Splines gearbox side: 25
  • Seal diameter: 40 mm
  • Outer diameter: 75 mm
Showing 25–48 of 73 products

Drivetrain for Subaru Legacy

The Subaru Legacy is a model synonymous with reliability and capability, thanks largely to its advanced power delivery system. The drivetrain is at the very heart of the car's ability to tackle challenging road conditions, and maintaining these components is vital for both safety and driving enjoyment. At CVJoint24 you will find a carefully curated range of parts tailored precisely to this model. With an extensive inventory, we cover everything from the smallest individual components to complete shafts. Choosing the correct parts for a Subaru demands specialist knowledge, as the system is far more complex than on a standard two-wheel-drive car.

We provide the expertise you need to navigate the various options for drive shafts and joints. Keeping the drivetrain in peak condition is not just about avoiding breakdowns; it is also about preserving the unique driving dynamics that the Legacy delivers. Replacing worn components in good time prevents unnecessary wear on other costly parts, such as the gearbox and differentials. Our focus is on supplying parts that meet or exceed original equipment specifications to guarantee long service life.

How the Subaru Legacy drivetrain is constructed

The Subaru Legacy drivetrain is built entirely around the brand's signature layout: Symmetrical All-Wheel Drive. This means engine power is distributed linearly and symmetrically to all four wheels. The layout incorporates a gearbox that directs power along a Subaru Legacy propeller shaft to the rear differential, while the front drive shafts power the front wheels. Each wheel hub is fitted with a Subaru Legacy outer CV joint, allowing steering angles and suspension travel without interrupting drive.

Inner CV joints accommodate angular deviations closer to the gearbox and differential, which is essential for eliminating vibrations. This balanced configuration gives the Legacy its surefooted handling, but it also relies on all components functioning in absolute harmony. Even small components such as ABS rings play a vital role by feeding data to the vehicle's traction control systems. If a single link in the chain deteriorates, the vehicle's ability to distribute power efficiently is compromised, making top-tier spare parts a priority for every owner.

Common faults and symptoms

Despite Subaru's robust build quality, the drivetrain endures immense stress, particularly during harsh European winters. One of the most frequent signs of wear is a clicking or knocking noise on full steering lock, which typically points to a failing outer CV joint. If you notice chassis vibrations under acceleration instead, this often indicates a worn inner CV joint on your Subaru Legacy. Such vibrations are occasionally mistaken for wheel imbalance, but if they vanish the moment you lift off the accelerator, the issue almost certainly lies in the drivetrain.

On all-wheel-drive cars, you should also be alert to imbalance or whining noises emerging from the centre tunnel, which can usually be traced back to the prop shaft or its centre bearing. Another common culprit is a split CV boot, which allows dirt and moisture to enter, rapidly destroying the precision-machined surfaces of the constant velocity joint. If the ABS warning light illuminates or the braking feels irregular at low speeds, inspect whether an ABS ring on your Subaru Legacy has cracked or corroded. Ignoring these early warnings often results in far costlier garage bills later on.

Common parts to replace on the Subaru Legacy

When maintenance is due, certain drivetrain components on the Subaru Legacy require replacement more frequently than others. Our sales data shows that outer constant velocity joints are in the highest demand, with multiple variants in stock, followed closely by complete drive shafts. Replacing a complete Subaru Legacy drive shaft is frequently the most economical route compared to rebuilding a single joint, as it saves workshop labour and ensures the entire assembly is brand new. Here are the most common component categories for your car:

  • Drive shafts: Several configurations for both front and rear axles to secure optimal power delivery.
  • Outer CV joints: Multiple variants engineered with high precision to cover different model years and engines.
  • Inner CV joints: Dedicated units connecting directly to the gearbox or differential, critical for eliminating driveline vibrations.
  • Propeller shafts: 2 robust options for central power transfer between the front and rear axles.
  • ABS rings: 2 precision reluctor rings ensuring accurate wheel speed sensor signals for vehicle safety systems.

By keeping these components in top condition, you prevent secondary damage to the differentials and gearbox. We ensure you have access to the right car parts whether your Legacy is a well-travelled workhorse or a newer model.

How to find the right part for your Subaru Legacy

Navigate directly to the appropriate component category for your Subaru Legacy:

On a vehicle with several interrelated drivetrain components, starting in the right section saves valuable time. By comparing the exact areas for the Subaru Legacy, it becomes straightforward to pinpoint issues with a driveshaft, CV joint or propeller shaft and proceed directly to the category matching your symptoms and technical specifications.

Identifying the exact part required for your Subaru Legacy can be complex, as technical specifications often vary by engine size, gearbox type and year of manufacture. The most reliable method is to select your vehicle's make, model and engine variant in our store selector. Filtering by these details will automatically display the car parts compatible with your specific car. This saves time and avoids the frustration of receiving an incorrect component.

We also advise checking the physical dimensions or counting the splines (teeth) on your original component whenever multiple technical versions exist for the same model year. Our database is refined to deliver maximum accuracy, minimising the risk of ordering mistakes and downtime in the workshop. We aim to make buying online straightforward and dependable for every Subaru owner by offering detailed technical specs and clear product photographs.

Why shop with CVJoint24

CVJoint24 is far more than a standard parts retailer; we are the international store of a Swedish driveline specialist, dispatching across Europe from our central warehouse in Helsingborg, Sweden. Our strength lies in deep technical specialism and a commitment to quality spare parts that fit correctly the first time. When you source parts for your Subaru Legacy from us, you access a range selected specifically to withstand the loads of all-wheel-drive motoring. We appreciate the engineering nuances of Subaru vehicles, backing our products with knowledgeable support that general car-parts retailers struggle to match.

With prompt dispatch from our Swedish facility and a customer service team dedicated to vehicle drivelines, we are the trusted partner for both DIY mechanics and independent garages. We combine competitive European pricing with the peace of mind only a true specialist can deliver. Our objective is total confidence in your purchase, from selecting your engine variant to final installation on your vehicle. Let us help keep your Subaru Legacy performing reliably on the road with components you can trust.

Frequently Asked Questions about Drivetrain for Subaru Legacy

How do I know if my Subaru Legacy needs a new drive shaft?

Common signs include pronounced vibrations during acceleration or unusual noises from underneath the vehicle. If the CV boot has split and grease has escaped, there is a high risk that the entire driveshaft will need replacing.

Why is there a clicking noise when I turn in my Subaru Legacy?

This is a classic symptom of a worn outer CV joint. As the balls inside the joint wear down, play develops, producing a distinctive clicking noise under load when cornering.

Do all CV joints fit all Subaru Legacy models?

No, there are significant differences depending on model year and engine variant. Always select your vehicle's make, model and engine to find the exact replacement part for your car.

What is the difference between an inner and outer CV joint?

The outer CV joint sits at the wheel hub and allows for steering movement, whereas the inner CV joint sits at the gearbox and accommodates length changes along the shaft during suspension travel.

Can I replace just the ABS ring on my Subaru Legacy?

Yes, if the CV joint itself is in good condition, you can often replace only the ABS ring if it has cracked or corroded, providing a much more cost-effective repair.

How does a faulty propeller shaft affect driving?

A worn propeller shaft often causes vibrations that can be felt throughout the entire vehicle, especially at certain road speeds. A whining or grinding noise may also emerge from the centre bearing.

Are your Subaru Legacy parts of original equipment quality?

We supply spare parts manufactured to match or exceed Subaru's technical specifications, ensuring the exact same fit and dependable function as original parts.