ABS rings for Audi 80

Discover our range of sensor rings and ABS reluctor rings tailored for the Audi 80 series. The selection covers both front-wheel drive and four-wheel drive saloon models produced between...

Choose version

Choose a version to refine the results and get closer to the right product.

Products for ABS rings for Audi 80

53 products
49 - 53 of 53
Item no.:339579
  • ABS teeth: 45
  • Inner diameter: 64 mm
  • Outer diameter: 74 mm
  • Width: 8,1 mm
Item no.:0353321
  • ABS teeth: 45
  • Inner diameter: 64 mm
  • Outer diameter: 74 mm
  • Width: 8,1 mm
Item no.:0356571
  • ABS teeth: 45
  • Inner diameter: 64 mm
  • Outer diameter: 74 mm
  • Width: 8,1 mm
Item no.:0388711
  • ABS teeth: 45
  • Inner diameter: 64 mm
  • Outer diameter: 74 mm
  • Width: 8,1 mm
Item no.:0379874
  • ABS teeth: 45
  • Inner diameter: 64 mm
  • Outer diameter: 74 mm
  • Width: 8,1 mm
Showing 49–53 of 53 products

ABS rings for Audi 80

The Audi 80 is an iconic model that has represented German engineering and reliability on European roads for decades. To maintain the vehicle's active safety features, particularly when it comes to anti-lock brakes, an intact ABS ring is absolutely vital. At CVJoint24, you will find a carefully selected range of ABS rings technically tailored for the various generations of this model. Whether you drive an earlier variant or one of the later model years, the braking system requires components with precise tolerances to operate reliably under demanding conditions.

Maintaining the drivetrain on an older car like this is an investment in both safety and longevity. A cracked or corroded reluctor ring can cause the entire ABS system to drop out, significantly increasing the risk of accidents during emergency braking. We supply multiple variants to account for the differences in dimensions and tooth counts across various engine choices and drive layouts. By selecting the correct spare part, you ensure your car's technical integrity is preserved for many kilometres to come.

What does an ABS ring do on an Audi 80?

The ABS ring, also known as an ABS reluctor ring or sensor ring, plays a key role in the car's active safety system. Its primary role is to deliver a precise wheel speed signal to the ABS sensor. The ring is manufactured with a specific number of teeth or magnetic segments that sweep past the sensor as the wheel rotates. This data is fed directly to the vehicle's electronic control unit, which monitors whether any wheel is about to lock up under heavy braking. If the unit detects an irregularity, it modulates brake pressure in fractions of a second to prevent skidding and retain steering control.

On an Audi 80, these rings are frequently pressed directly onto the outer CV joint. Sitting exposed right next to the road surface, they face harsh environmental punishment from moisture, road grit and salt. An intact ring is essential for the system to carry out its calculations correctly. Without a clear signal from the sensor ring, the control module cannot regulate braking effectively, typically triggering a fail-safe mode that disables anti-lock operation entirely.

Common signs of wear

The most frequent warning sign that an ABS ring on your car has failed is the ABS warning light illuminating on the instrument cluster. This often starts intermittently, such as in wet weather or after driving through deep water, before turning into a permanent fault. Another very distinct symptom is a pulsing brake pedal or false ABS activation under normal, low-speed braking on dry tarmac. This is usually caused by the ring cracking due to rust developing underneath, which alters the gap between the teeth and sends a distorted signal to the sensor.

A visual inspection will often reveal noticeable splits or teeth that have corroded away entirely. Because many Audi 80 models have faced harsh winter climates, corrosion is by far the most common reason these parts require replacement. If you notice unusual braking behaviour or if the warning lamp stays lit, inspect the rings immediately. Ignoring these symptoms can noticeably lengthen stopping distances and compromise the car's stability systems in an emergency.

How to choose the correct ABS ring

Selecting the right ABS ring for your Audi 80 requires precision, as several versions exist depending on the car's exact specifications. The differences primarily involve the tooth count, internal diameter, ring width, and whether the part is intended for the front or rear axle. An ABS reluctor ring with the wrong number of teeth will send an incorrect speed signal, preventing the ABS system from synchronising with the remaining wheels. This immediately triggers diagnostic trouble codes and shuts down ABS functionality.

To make certain you order the correct component, we strongly recommend filtering by your car's make, model and engine variant. This will narrow our catalogue to parts fully compatible with your specific engine and production year. Where possible, verify the dimensions of your old ring, particularly if the vehicle has undergone modifications or past mechanical repairs. The correct fitment is crucial to ensure the ring sits firmly on the CV joint without loosening or vibrating while driving.

Related parts to check

Be sure to check these exact pages for the same vehicle when working on an ABS ring:

When a drivetrain component shows signs of wear, neighbouring parts on the vehicle often require inspection too. By comparing these dedicated pages for the Audi 80, it becomes much simpler to establish whether the fault lies strictly with the ABS ring or another related part of the driveline.

This is particularly important on models where vibrations, play and strange noises can transfer symptoms across several sections of the same drivetrain. A quick check of related categories reduces the risk of replacing one correct part while overlooking an adjacent component that affects the very same issue.

Inspecting the complete drivetrain at the same time saves time and reduces future garage visits. A sound, clean driveline ensures engine torque reaches the wheels without power loss or unwanted noises, while keeping your safety systems operating with maximum precision.

Why shop at CVJoint24?

CVJoint24 is your dedicated specialist for driveline spare parts. As a Swedish driveline specialist shipping from our Helsingborg warehouse, we have built up deep expertise in vehicle power transmission, allowing us to provide technical guidance and product knowledge that general car parts stores rarely match. Our focus is on supplying car parts with an exact fit and proven durability, well suited to demanding European driving conditions. We recognise the importance of getting the right part first time, and our make, model and engine lookup makes ordering fast and dependable.

Choosing us gives you access to a specialised range where every item is carefully selected to meet strict quality criteria. We combine technical know-how with a smooth shopping experience, making it straightforward for both DIY mechanics and professional garages to source the right components for an Audi 80. With a comprehensive stock of ABS rings and a passion for drivetrains, we help keep your vehicle safe and roadworthy. Rely on a specialist that truly understands driveline mechanics and prioritises your safety at every turn.

Frequently asked questions about ABS rings for Audi 80

How do I know which ABS ring fits my Audi 80?

The easiest way is to select your car's make, model and engine variant in our search filter. As the Audi 80 uses different rings depending on engine size, model year and whether it is a Quattro, this filters out exactly the 39 parts relevant to your car.

Can I replace just the ABS ring, or do I have to replace the complete CV joint?

On most Audi 80 models, you can easily replace just the ABS ring if the CV joint is otherwise in good condition. However, if the joint shows signs of wear or makes noises, it may be more cost-effective to replace the complete unit, which often includes a new ring.

Why does the ABS ring crack on an Audi 80?

The most common cause is corrosion. Rust builds up between the CV joint and the ring, creating outward pressure that eventually causes the ring to snap. This is particularly common on European roads due to winter road salt.

What are the symptoms of a broken ABS ring?

Common symptoms include the ABS warning light illuminating, the brake pedal pulsing during gentle braking at low speeds, or the ABS system shutting down entirely.

Is it difficult to fit a new ABS ring yourself?

It requires removing the CV joint from the wheel hub. The old ring is tapped off and the new one is pressed or heat-shrunk into place. This requires some mechanical experience and the correct tools.

Does the number of teeth on the ABS ring matter?

Yes, it is absolutely critical. If you fit a ring with the wrong tooth count, the ABS sensor will register an incorrect rotational speed, causing the system to trigger a fault code and disable itself immediately.

Is the ABS ring fitted on the front or rear axle of an Audi 80?

It depends on the model. Front-wheel-drive cars have them primarily at the front, whilst Quattro models have ABS rings on all four wheels to allow the system to regulate braking force individually.