Audi 80 Avant 2.0 E
Welcome to CVJoint24, the international shop of a Swedish driveline specialist supplying the Audi 80 Avant 2.0 E across the EU. We stock a comprehensive range of premium components to...
Products for Audi 80 Avant 2.0 E
- Position: Front left
- Flange diameter: 100 mm
- Total length: 586 mm
- Splines wheel side: 33
- ABS teeth: 45
- Position: Front right
- Flange diameter: 100 mm
- Total length: 573 mm
- Splines wheel side: 33
- ABS teeth: 45
- Position: Inner
- Seal diameter: 100 mm
- Inner splines: 33
- Joint diameter: 100 mm
- Position: Outer
- Seal diameter: 53 mm
- Inner splines: 30
- Outer splines: 33
- Joint diameter: 87,8 mm
- Position: Front left
- Total length: 470 mm
- Splines wheel side: 33
- Position: Front
- ABS teeth: 45
- Inner diameter: 64 mm
- Outer diameter: 74 mm
- Width: 8,1 mm
- Position: Inner
- Seal diameter: 94 mm
- Inner splines: 33
- Number of joints: 3
- ABS teeth: 0
- Position: Outer
- ABS teeth: 45
- Seal diameter: 53 mm
- Inner splines: 30
- Outer splines: 33
Drivetrain for Audi 80 Avant 2.0 E
The Audi 80 Avant 2.0 E is a classic model renowned for its reliability and robust engineering, but maintaining these qualities requires drivetrain components that are in peak condition. The drivetrain is the complex system that transfers engine torque to the road wheels, and each component plays a vital role in the car's overall handling and stability. Here at CVJoint24, you will find a curated selection of parts tailored specifically to the 2.0 E variant of the Audi 80 Avant, ensuring power transmission remains smooth, efficient and vibration-free.
We focus on supplying parts that meet or exceed original equipment specifications, giving you a lasting solution for repairs and routine maintenance. By choosing the correct spare parts, you extend the lifespan of your vehicle and ensure a safe driving experience for both driver and passengers. Our specialist driveline expertise allows us to provide components built to withstand the rigours of everyday motoring, from stop-start urban traffic to long, fully laden motorway journeys.
How the drivetrain is configured on the Audi 80 Avant 2.0 E
The layout of the drivetrain on an Audi 80 Avant 2.0 E balances mechanical precision with hard-wearing durability. The setup centres on the gearbox, which transmits power onwards via drive shafts to the front wheels. Each drive shaft is fitted with two joints: an inner CV joint adjacent to the gearbox and an outer CV joint at the wheel hub. These constant velocity joints are essential for allowing the wheels to move with suspension travel and turn for steering, all while delivering smooth, continuous power.
To safeguard these precision components, durable CV boots made from high-grade rubber or thermoplastic retain lubricating grease while sealing out road grit, water and winter salt. The system is also integrated with ABS rings, which supply critical wheel-speed data to the braking system sensors. This setup makes every single part an essential link in the car's overall safety chain. Understanding how these parts interact is key to carrying out correct maintenance and selecting the right car parts when wear and tear begins to show.
Common faults and symptoms
Several clear symptoms suggest that the drivetrain in your Audi 80 Avant 2.0 E is worn and requires attention. One of the most typical signs is a clicking or knocking sound on full steering lock under acceleration; this usually indicates that an outer CV joint has suffered wear due to grit ingress or loss of grease. If ignored, the joint can fail completely, leaving the vehicle stranded.
Vibrations through the steering wheel or chassis when driving, particularly under acceleration or within specific speed windows, often point to an imbalanced driveshaft or a worn inner CV joint. Furthermore, if the ABS warning light illuminates or the brake pedal pulses unexpectedly under gentle braking, a cracked or heavily corroded ABS reluctor ring is frequently the culprit. Responding promptly to these early warnings prevents far more costly secondary damage to the gearbox and suspension.
Common parts to replace on the Audi 80 Avant 2.0 E
Based on our extensive experience and technical data for this specific model, certain components require replacement more regularly to maintain dependable operation. We stock a comprehensive range tailored precisely to these requirements. Here is a breakdown of our most common categories for the Audi 80 Avant 2.0 E:
- Drive shafts: We stock 8 different variants to cover all technical configurations and fitting positions.
- Outer CV joints: 2 specific models engineered for maximum articulation and dependable torque transfer.
- Inner CV joints: 3 options designed to minimise drivetrain vibration between the gearbox and drive shaft.
- CV boots: 2 types of protective gaiters essential for preserving the working life of your joints.
- ABS rings: 2 variants engineered to ensure accurate signal transmission to the vehicle's braking safety systems.
Replacing damaged CV boots in good time is the most cost-effective way to avoid breakdown. A split boot quickly lets in abrasive road dirt that ruins the precision bearing surfaces inside the CV joint, meaning the entire joint must be replaced rather than just the flexible gaiter.
Finding the right part for your Audi 80 Avant 2.0 E
Navigate directly to the required component section for your Audi 80 Avant 2.0 E:
On a vehicle where several drivetrain faults can share similar symptoms, starting in the right category saves time. Comparing the specific component groups for the Audi 80 Avant 2.0 E makes it straightforward to distinguish between issues with a drive shaft, a CV joint or a propeller shaft, guiding you to the section that best matches your symptoms and fitment.
- Drive shafts for Audi 80 Avant 2.0 E
- Outer CV joints for Audi 80 Avant 2.0 E
- Inner CV joints for Audi 80 Avant 2.0 E
- CV boots for Audi 80 Avant 2.0 E
- ABS rings for Audi 80 Avant 2.0 E
Following these links takes you straight to our dedicated product range for each assembly. Every part in our catalogue is carefully cross-referenced with vehicle technical specifications, giving you complete confidence that your replacement will fit accurately. If you need any assistance, our specialist team is on hand to help guide your choice of drivetrain parts.
Why buy from CVJoint24?
As the international shop of a Swedish driveline specialist, we combine in-depth technical knowledge with rapid dispatch across the EU from our warehouse in Helsingborg, Sweden. When you order from us, you receive high-grade components backed by our accurate fitment guarantee. We know that getting your car back on the road matters, which is why we help you identify the right parts first time without the hassle of returns or compatibility doubts.
With prompt dispatch across Europe, we help get your Audi 80 Avant 2.0 E back into service without delay. Our deep stockholding and focused expertise in vehicle power transmission make us the trusted partner for both DIY mechanics and professional workshops seeking durable quality. Count on getting the correct part, delivered directly from specialists who understand your car's mechanical needs in detail.
Frequently asked questions about drivetrain parts for Audi 80 Avant 2.0 E
How do I know if the drive shaft on my Audi 80 Avant 2.0 E needs replacing?
The most common signs are heavy vibrations under acceleration or unusual noises from the drivetrain. If you notice that grease has leaked from the CV boot, this is also a clear indication that the shaft or joint may be damaged.
Can I replace just the CV boot if it is split?
Yes, if you catch the damage early and the CV joint is still clean and properly lubricated, you can replace just the boot. However, if dirt has entered or the joint has started making noises, the entire CV joint must be replaced.
Why is the ABS ring important for my Audi 80?
The ABS ring is mounted on the CV joint and sends signals to the car's braking system. If the ring is cracked or corroded, the ABS system may fail or trigger unnecessarily, which compromises driving safety.
Do all CV joints fit all Audi 80 models?
No, there are differences depending on the engine variant and model year. For the Audi 80 Avant 2.0 E, it is important to select your exact model and engine specifications to ensure you get the correct number of splines and the right dimensions.
What is included when I buy a CV joint kit from you?
Our CV joint kits are complete for installation and typically include the CV joint itself, a vehicle-specific CV boot, high-quality grease, circlips and all necessary clamps.
How quickly can I have my parts delivered?
We always aim for fast dispatch and quick delivery across the EU for in-stock items, ensuring your Audi 80 Avant 2.0 E is off the road for no longer than necessary.