Audi A3 Sportback

Spare parts and drivetrain components for Audi A3 Sportback.

Choose version

Choose a version to refine the results and get closer to the right product.

Products for Audi A3 Sportback

1,203 products
1153 - 1176 of 1203
Item no.:347755
  • Position: Front, Inner
  • Inner splines: 28
  • Seal diameter: 108 mm
  • Total length: 32 mm
  • Joint diameter: 107 mm
Item no.:0664032
  • Total length: 116 mm
Item no.:3575243
  • Position: Front, Outer
  • Inner splines: 33
  • Seal diameter: 59 mm
  • Outer splines: 36
  • Thread size: M16X1,5
Item no.:0501429
  • Position: Outer
  • Inner splines: 30
  • Splines wheel side: 36
  • Seal diameter: 60 mm
  • Outer diameter: 90 mm
Item no.:0421709
  • Position: Inner
  • Inner splines: 33
  • Seal diameter: 100 mm
  • Total length: 34 mm
  • Joint diameter: 100 mm
Item no.:351716
  • Position: Front, Outer
  • Inner splines: 27
  • Seal diameter: 59 mm
  • Outer splines: 36
  • Thread size: M16X1,5
Item no.:0995111
  • Inner diameter: 67 mm
  • Outer diameter: 83 mm
Item no.:0638731
  • Total length: 102 mm
Item no.:0663897
  • Total length: 113 mm
Item no.:0607146
  • Total length: 125 mm
Item no.:0646416
  • Total length: 111 mm
Item no.:341521
  • Position: Front, Inner
  • Inner splines: 28
  • Seal diameter: 108 mm
  • Total length: 32 mm
  • Joint diameter: 107 mm
Item no.:3591441
  • Position: Front, Outer
  • Inner splines: 33
  • Seal diameter: 59 mm
  • Outer splines: 36
  • Thread size: M16X1,5
Item no.:0572946
  • Position: Outer
  • Inner splines: 30
  • Splines wheel side: 36
  • Seal diameter: 60 mm
  • Outer diameter: 90 mm
Item no.:348134
  • Position: Front, Inner
  • Inner splines: 33
  • Seal diameter: 100 mm
  • Total length: 34 mm
  • Joint diameter: 100 mm
Item no.:353549
  • Position: Front, Outer
  • Inner splines: 27
  • Seal diameter: 59 mm
  • Outer splines: 36
  • Thread size: M16X1,5
Item no.:0989935
  • Inner diameter: 67 mm
  • Outer diameter: 83 mm
Item no.:0600716
  • Total length: 102 mm
Item no.:0677810
  • Total length: 113 mm
Item no.:0683495
  • Total length: 111 mm
Showing 1153–1176 of 1203 products

Audi A3 Sportback drivetrain

The Audi A3 Sportback is renowned for its blend of sporty driving dynamics and everyday practicality. Maintaining these characteristics requires a drivetrain in peak condition. The drivetrain transfers power from the engine to the wheels, and on an Audi A3 Sportback, this involves a sophisticated set of components working together with high precision. At CVJoint24, we specialise in these exact parts, offering an extensive range for this specific model. Selecting the correct components ensures not only operational reliability, but also optimal fuel efficiency and ride comfort.

As a Swedish driveline specialist, our focus is to provide car parts that meet or exceed original equipment specifications. Whether your car is front-wheel drive or equipped with Quattro all-wheel drive, we stock the right technical solutions. Maintaining your drivetrain is a vital investment in your vehicle's lifespan, as worn parts can cause secondary damage to the gearbox and suspension. With our deep expertise in all car makes, we can guide you to the perfect fit for your Audi A3 Sportback.

How the drivetrain is engineered on the Audi A3 Sportback

The layout of the drivetrain on an Audi A3 Sportback varies depending on engine choice and driveline configuration, yet the fundamental principle remains the same. Power leaves the engine and travels through the gearbox out to the drive shafts. For front-wheel-drive models, the setup is relatively compact, using two front drive shafts to manage power delivery while accommodating steering angles. Each shaft features an inner and an outer CV joint, where the outer joint allows the wheels to turn and the inner constant velocity joint accommodates suspension travel and axial movement.

For the Audi A3 Sportback with Quattro, a more advanced configuration is employed. A propeller shaft for Audi A3 Sportback directs power to the rear axle via an active central coupling, typically a Haldex system. This setup requires additional rear driveshafts as well as a centre bearing to keep the prop shaft stable under load. This architecture requires all parts to be precisely balanced to avoid vibrations and noises, particularly at motorway speeds or during hard acceleration.

Common faults and symptoms

Several clear symptoms indicate that your Audi A3 Sportback drivetrain components are wearing out. One of the most typical signs is a clicking or knocking sound on full steering lock at lower speeds. This is a classic symptom that an outer CV joint on your Audi A3 Sportback is failing, often caused by a split CV boot letting in road dirt and moisture. If ignored, the joint can suffer total failure, leaving the vehicle stranded.

Another common symptom is vibration felt through the car body under acceleration. This frequently points to wear in an inner CV joint on your Audi A3 Sportback or an unbalanced drive shaft. On Quattro variants, vibrations can also stem from the propeller shaft or its centre bearing. Acting quickly when these symptoms appear is crucial, as persistent vibration can cause premature wear on gearbox seals and bearings. Regularly inspecting the condition of your CV boots will often prevent costly repairs.

Commonly replaced parts on the Audi A3 Sportback

Depending on driving style and mileage, certain components on an Audi A3 Sportback require replacement over time. Our range is tailored to meet these needs with exceptional precision. Key categories for your car include:

  • Drive shafts for Audi A3 Sportback – Complete assemblies for both front and rear axles.
  • Outer CV joints for Audi A3 Sportback – The most common wear item when clicking noises occur while cornering.
  • Inner CV joints for Audi A3 Sportback – Critical for eliminating vibrations during acceleration.
  • Propeller shafts for Audi A3 Sportback – For all-wheel-drive models suffering from driveline imbalances.

Alongside these main assemblies, CV joint boots and ABS rings are also frequently replaced. An intact CV boot is the most cost-effective insurance for your CV joints, keeping essential grease inside while sealing out road grime. We always advise checking boot condition during every routine service.

How to find the right part for your Audi A3 Sportback

Select the relevant category for your Audi A3 Sportback below:

On a vehicle where several drivetrain faults can share similar symptoms, starting in the right subcategory is sensible. Comparing the exact component sections for the Audi A3 Sportback makes it easier to distinguish between issues in a drive shaft, CV joint or propeller shaft, directing you to the parts matching your symptoms and specifications.

Navigating the product range is straightforward and secure. The simplest way to find the correct spare parts for your Audi A3 Sportback is to select your car's make, model and engine variant. Filtering by these specifications automatically displays components verified for your chassis type, engine code and gearbox variant, eliminating ordering errors and saving workshop time.

Please note that the Audi A3 Sportback has been produced across several generations using diverse engineering platforms. Variations occur in CV joint spline counts, drive shaft lengths and gearbox flange fittings. If you are uncertain about fitment, you can check the OEM number on your original component and compare it with our technical specifications. Our database is regularly updated to ensure complete accuracy across every Audi A3 Sportback configuration.

Why buy from CVJoint24?

Choosing CVJoint24 means relying on a Swedish driveline specialist dedicated to premium quality and technical expertise. We recognise the vital importance of exact fitment and long-term durability when it comes to driveline assemblies. Unlike generic car parts retailers, our categories offer deep specialisation, allowing us to supply components even for rarer Audi A3 Sportback engine choices. We provide the peace of mind expected from a franchised garage, combined with specialist product knowledge and competitive pricing.

We combine automotive knowledge with a seamless online shopping experience. By choosing your exact make, model and engine, alongside our fast dispatch across the EU, we ensure your car is back on the road without delay. Buying from a dedicated specialist also gives you access to robust components engineered to withstand harsh European winters, where road grit, salt and wet conditions challenge materials and seals. Trust CVJoint24 for your Audi A3 Sportback – we know drivelines.

Frequently asked questions about drivetrain parts for Audi A3 Sportback

How do I know if my Audi A3 Sportback needs a new outer CV joint?

The most common sign is a clicking noise when turning sharply at low speeds. If the noise disappears when driving straight ahead, it is almost certainly the outer CV joint that is worn.

Why does my Audi A3 Sportback vibrate under acceleration?

Vibrations under load are often caused by wear in the inner CV joint or an imbalance in the drive shaft itself. It could also stem from a worn centre bearing if your car has Quattro all-wheel drive.

Do all drive shafts fit all Audi A3 Sportback models?

No, drive shafts vary depending on the engine, gearbox (manual/automatic), and whether the car is front-wheel drive or has Quattro. Always select your make, model and engine to find the correct part.

What is the difference between a drive shaft and a CV joint?

The drive shaft is the complete shaft that transfers power, while the CV joints sit at the ends of the shaft to allow articulation and movement. You can often replace just the joint if the shaft itself is undamaged.

How often should I inspect the CV boots on my Audi?

We recommend inspecting the CV boots at every oil service or tyre change. A split boot quickly leads to the CV joint failing, so early replacement will save you a lot of money.

Can I replace the propeller shaft myself on my Audi A3 Sportback Quattro?

It is technically possible, but it requires good tools and usually correct alignment and balancing of the system. For most DIY mechanics, professional installation is recommended, but we supply the correct parts for the job.

Do your CV joint kits include everything needed for the replacement?

Yes, our outer and inner CV joint kits are normally supplied complete with CV boot, grease, clamps, and mounting hardware to ensure a proper installation.