Audi A4 Allroad 2.0 TDI Quattro

Spare parts and drivetrain components for your Audi A4 Allroad 2.0 TDI Quattro. Verify fitment by vehicle make, model and engine before ordering.

Products for Audi A4 Allroad 2.0 TDI Quattro

38 products
25 - 38 of 38
Item no.:3578838
  • Position: Outer
  • Inner splines: 33
  • Seal diameter: 76,5 mm
  • Outer splines: 42
  • Thread size: M16X1,5
Item no.:646391
  • Position: Rear, Inner
  • Inner splines: 25
  • Splines gearbox side: 42
  • Seal diameter: 76,5 mm
  • Total length: 76 mm
Item no.:318288
  • Position: Front left
  • Splines wheel side: 42
  • Total length: 465 mm
  • Joint diameter: 85 mm
  • Joint diameter, gearbox side: 84 mm
Item no.:618761
  • Position: Rear
  • Splines wheel side: 38
  • Total length: 626 mm
  • Joint diameter: 94 mm
  • Flange diameter: 100 mm
Item no.:316555
  • Position: Front
  • Splines wheel side: 42
  • Total length: 458 mm
  • Thread size: M16x1.5
Item no.:624294
  • Position: Rear
  • Total length: 1,475 mm
Item no.:621244
  • Position: Rear
  • Total length: 1,478 mm
Item no.:622119
  • Position: Rear
  • Total length: 1,478 mm
  • Outer diameter 1: 99,7 mm
  • Bolt circle diameter 1: 86 mm
Item no.:312992
  • Position: Front
  • Splines wheel side: 42
  • Total length: 465 mm
Item no.:1147855
  • Position: Front left
  • Splines wheel side: 42
  • Total length: 463 mm
  • Joint diameter: 88 mm
  • Joint diameter, gearbox side: 123 mm
Item no.:626720
  • Total length: 1,478 mm
  • Outer diameter 1: 100 mm
  • Bolt circle diameter 1: 86 mm
Item no.:314696
  • Position: Front
  • Splines wheel side: 42
  • Total length: 463 mm
  • Joint diameter: 94 mm
  • Joint diameter, gearbox side: 123 mm
Item no.:148701
  • Position: Inner
  • Inner splines: 34
  • Total length: 88 mm
  • Joint diameter: 123 mm
  • Outer splines: 34
Item no.:7312192
  • Position: Front, Inner
  • Inner splines: 24
  • Total length: 84 mm
  • Joint diameter: 81 mm
  • Outer splines: 24
Showing 25–38 of 38 products

Audi A4 Allroad 2.0 TDI Quattro drivetrain parts

Owning an Audi A4 Allroad 2.0 TDI Quattro means driving a vehicle engineered for both refined comfort and impressive capability under demanding conditions. The drivetrain is the core of this system, responsible for transferring the power of the punchy 2.0 TDI engine to all four wheels. To maintain the distinctive road manners and safety provided by the Quattro system, every component across the power transmission must perform flawlessly. Drivetrain wear does not just compromise your vehicle's performance; it can quickly lead to costly secondary damage if neglected.

At CVJoint24, you will find a carefully selected range of parts tailored specifically to the Audi A4 Allroad 2.0 TDI Quattro. We focus on providing replacement components that meet or exceed original equipment specifications. This is particularly vital for Allroad models, which regularly encounter harsher environments than standard passenger cars. By fitting the right components, you ensure your car's four-wheel-drive system continues to deliver dependable traction and stability on any road surface.

How the Audi A4 Allroad 2.0 TDI Quattro drivetrain is designed

The drivetrain on an Audi A4 Allroad 2.0 TDI Quattro is a technical masterpiece combining mechanical precision with advanced German engineering. Power leaves the engine and passes through the gearbox into a central differential. From there, torque is distributed to both the front and rear axles. A longitudinal propeller shaft runs beneath the centre of the car to drive the rear wheels, whilst front drive shafts deliver torque to the front wheels. Each driveshaft features both an inner and an outer CV joint to allow for steering movement and suspension articulation whilst ensuring smooth, uninterrupted power delivery.

Because the Allroad model has slightly higher ground clearance than the standard version of the Audi A4 Allroad, the constant velocity joints operate at slightly steeper running angles. This places rigorous demands on material quality and proper lubrication. The CV joints are protected by durable rubber CV boots that retain grease and prevent contamination. If a boot tears, the precision bearings inside the joint are exposed to grit, water, and road salt, resulting in rapid wear. Understanding this assembly helps you spot potential driveline issues before serious damage occurs.

Common problems and symptoms

There are several typical warning signs indicating that drivetrain components on your Audi A4 Allroad 2.0 TDI Quattro require attention. One of the most common symptoms of a worn outer CV joint is a rhythmic clicking noise heard when turning sharply at low speeds. If you notice a shudder or vibration through the cabin under hard acceleration, a worn inner CV joint is frequently the culprit. Vibrations can also occur if the prop shaft has lost balance or if its propeller shaft centre bearing has deteriorated.

Split CV boots are another common concern. If you spot grease splattered on the inside of the road wheel or suspension uprights, the boot has split or loosened. If caught immediately, fitting a new boot kit with fresh grease may save the assembly, but dirt often enters quickly and ruins the internal races. On Quattro models, it is also important to listen for whines or hums from the differential or propeller shaft, as these may signal broader drivetrain wear requiring prompt inspection.

Common parts to replace on the Audi A4 Allroad 2.0 TDI Quattro

In our range for the Audi A4 Allroad 2.0 TDI Quattro, we stock the most critical components liable to wear over the vehicle's lifespan. We currently catalogue 16 high-quality parts for this specific model. Amongst these, you will find several options for complete drive shafts, covering replacements for both front and rear axles. Fitting a complete drive shaft is frequently the most practical, cost-effective solution compared to rebuilding tired assemblies, as it includes brand-new inner and outer CV joints pre-assembled.

If you only require specific replacement components, we offer 2 types of outer CV joints and 2 types of inner CV joints. Furthermore, we keep several propeller shafts in stock, ensuring your Quattro all-wheel-drive system operates without backlash or vibrations. Choosing the exact part from the outset reduces fitting issues and keeps your vehicle performing at its best. All our car parts are thoroughly tested to withstand the substantial torque generated by the 2.0 TDI engine.

Finding the right part for your Audi A4 Allroad 2.0 TDI Quattro

Navigate directly to the appropriate category for your Audi A4 Allroad 2.0 TDI Quattro:

With multiple drivetrain components working together, locating the correct section right away saves valuable time. By comparing parts tailored specifically for the Audi A4 Allroad 2.0 TDI Quattro, you can easily differentiate between drive shaft, CV joint, or prop shaft issues and order the part that matches your symptoms and fitment.

Following these links directs you immediately to products verified for your model variant. Should you have any questions about fitment, our technical support team is always on hand to assist.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist based in Helsingborg, Sweden. We are driven by a passion for power transmission and an in-depth understanding of modern automotive drivetrains. When you buy from us, you receive high-calibre spare parts supported by technical expertise and reliable customer service. We guarantee accurate fitment when you select your vehicle by make, model, and engine variant, ensuring you receive the correct components first time.

We know that unexpected vehicle repairs require quick solutions. That is why we ship promptly across the European Union from our Swedish central warehouse to minimise downtime. Whether you are a professional garage or a dedicated DIY mechanic, CVJoint24 is your dependable partner for premium Audi A4 Allroad 2.0 TDI Quattro drivetrain components.

Frequently asked questions about Drivetrain for Audi A4 Allroad 2.0 TDI Quattro

How do I know if my Audi A4 Allroad 2.0 TDI Quattro needs a new drive shaft?

The most common signs are vibrations under acceleration, clicking noises when cornering or visible damage to the CV boots. If you notice grease splattered inside the wheel rim, you should inspect the shaft immediately.

What is the difference between the inner and outer CV joint on this model?

The outer CV joint is located closest to the wheel and accommodates steering angles; when worn, it typically produces a clicking sound. The inner CV joint sits closest to the gearbox and primarily absorbs suspension movement; wear here usually causes vibrations throughout the car.

Do all drive shafts from the standard Audi A4 also fit the Allroad model?

No, the Allroad features a unique chassis setup and raised ground clearance, which can mean differences in driveshaft lengths and operating angles. Always select your specific make, model and engine to ensure the correct fitment.

Why is it important to replace a vibrating propeller shaft?

An unbalanced propeller shaft can cause severe damage to the gearbox output shaft, the differential and the centre bearing. Prolonged vibrations can lead to extensive and costly repairs across the entire Quattro system.

Do you offer a fitment guarantee on drivetrain parts for Audi?

Yes, when you select your specific vehicle details on cvjoint24.com, your purchase is covered by our fitment guarantee, ensuring the part fits your Audi A4 Allroad 2.0 TDI Quattro correctly.

How quickly can I receive my spare parts?

We process all orders promptly to get your car back on the road as quickly as possible, shipping fast and reliably across the European Union.