Audi A4 Avant 1.9 TDI Quattro

Spare parts and drivetrain components for the Audi A4 Avant 1.9 TDI Quattro. Verify fitment by selecting your make, model and engine before ordering.

Products for Audi A4 Avant 1.9 TDI Quattro

51 products
1 - 24 of 51
Item no.:0333973
  • ABS teeth: 45
  • Inner diameter: 77 mm
  • Outer diameter: 81 mm
  • Width: 11 mm
Item no.:333732
  • Position: Front
  • ABS teeth: 45
  • Inner diameter: 77 mm
  • Outer diameter: 81 mm
  • Width: 11 mm
Item no.:1177516
  • Position: Front left
  • Flange diameter: 130 mm
  • Total length: 596 mm
  • Splines wheel side: 33
  • ABS teeth: 45
Item no.:2100727
  • Position: Front right
  • Flange diameter: 130 mm
  • Total length: 617 mm
  • Splines wheel side: 33
  • ABS teeth: 45
Item no.:0429812
  • Position: Inner
  • Seal diameter: 130 mm
  • Inner splines: 34
Item no.:0496987
  • Position: Inner
  • Seal diameter: 100 mm
  • Inner splines: 33
  • Joint diameter: 100 mm
Item no.:0528530
  • Position: Outer
  • ABS teeth: 45
  • Seal diameter: 53 mm
  • Inner splines: 30
  • Outer splines: 33
Item no.:0543435
  • Position: Outer
  • ABS teeth: 45
  • Seal diameter: 53 mm
  • Inner splines: 30
  • Outer splines: 33
Item no.:0529823
  • Position: Outer
  • ABS teeth: 45
  • Seal diameter: 59 mm
  • Inner splines: 27
  • Outer splines: 38
Item no.:1197465
  • Position: Front left
  • Flange diameter: 130 mm
  • Total length: 495 mm
  • Splines wheel side: 33
  • ABS teeth: 45
Item no.:2166056
  • Position: Front right
  • Flange diameter: 130 mm
  • Total length: 585 mm
  • Splines wheel side: 33
  • ABS teeth: 45
Item no.:0659948
  • Position: Front
  • Diameter: 84 mm
  • Outer diameter: 23 mm
Item no.:621771
  • Position: Rear
  • Total length: 1,149 mm
Item no.:1125643
  • Position: Front left
  • Flange diameter: 123 mm
  • Total length: 595 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:2119709
  • Position: Front right
  • Flange diameter: 123 mm
  • Total length: 620 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:3166987
  • Position: Front left, Front right
  • Flange diameter: 123 mm
  • Joint diameter: 123 mm
  • Total length: 544 mm
  • ABS teeth: 45
Item no.:3129726
  • Position: Front left, Front right
  • Flange diameter: 123 mm
  • Total length: 521 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:0263907
  • Diameter: 30 mm
  • Height: 85 mm
  • Hole spacing c/c: 228 mm
  • Bearing thickness: 15 mm
Item no.:0449917
  • Position: Inner
  • Seal diameter: 123 mm
  • Inner splines: 34
Item no.:0265297
  • Number of centre bearings: 1
  • Number of joints: 3
  • Total length: 1,565 mm
Item no.:0224965
  • Position: Inner
  • Inner splines: 25
  • Joint diameter: 100 mm
Item no.:0504468
  • Position: Outer
  • ABS teeth: 45
  • Seal diameter: 53 mm
  • Inner splines: 27
  • Outer splines: 33
Item no.:1193497
  • Position: Front left
  • Flange diameter: 130 mm
  • Total length: 602 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Showing 1–24 of 51 products

Audi A4 Avant 1.9 TDI Quattro drivetrain

The Audi A4 Avant 1.9 TDI Quattro strikes a unique balance between fuel economy and Audi's legendary Quattro four-wheel-drive system. Maintaining the road-holding and safety this setup delivers requires top-quality components throughout the entire power transmission. The drivetrain on this specific model is subjected to considerable stress, especially with the robust low-end torque generated by the 1.9 TDI engine. At CVJoint24, you will find a curated selection of components, technically verified for your exact vehicle. We understand how crucial it is that every link in the chain—from the gearbox to the wheel hub—performs flawlessly, ensuring optimal traction and ride quality in all driving conditions.

Our product range for this model includes 24 carefully chosen items, ensuring you get precisely what you need to restore your car's reliability. As specialists in the drivetrain, we focus on providing components that meet the rigorous demands of four-wheel-drive vehicles. Selecting the correct parts not only extends your vehicle's lifespan, but also guarantees that the Quattro system's intelligent power delivery functions exactly as intended from the factory.

How the drivetrain is engineered on the Audi A4 Avant 1.9 TDI Quattro

The drivetrain architecture of the Audi A4 Avant 1.9 TDI Quattro is technically advanced, linking both the front and rear axles via a permanent four-wheel-drive system. Power travels from the longitudinally mounted engine through the gearbox to a centre differential. From there, a propeller shaft directs drive to the rear axle, whilst the front axle is driven directly via outputs integrated into the gearbox housing. This layout delivers the balanced, symmetrical power distribution characteristic of Audi.

At the front, drive shafts must handle both steering and tractive effort, placing high demands on the outer CV joints, which have to articulate sharply under load. The rear drive shafts focus purely on transmitting torque, working in unison with the rear final drive. The entire assembly relies on every component remaining in top condition, including the inner and outer constant velocity joints as well as the propeller shaft centre bearing. The slightest play or imbalance in these parts can quickly send vibrations throughout the chassis, reducing comfort and accelerating mechanical wear.

Common faults and symptoms

There are several distinct signs indicating that drivetrain parts on your Audi are starting to fail. One of the most typical symptoms is a rhythmic clicking noise on full steering lock during acceleration, which almost certainly points to a worn outer CV joint. This is frequently caused by a split CV boot, which allows grease to escape while letting road grit in, rapidly destroying the joint's precision surfaces.

Vibrations that arise specifically when accelerating and disappear as soon as you lift off the throttle often indicate a worn inner CV joint. Quattro owners should also be vigilant for driveline vibrations resonating through the cabin floor, which typically point to issues with the prop shaft universal joints or its centre bearing. Another frequent problem is a cracked ABS reluctor ring, caused by rust expanding beneath the ring over time. This disrupts the sensor signal, leading to unwanted ABS pulsing at low speeds or triggering the ABS warning light on the dashboard.

Common parts to replace on the Audi A4 Avant 1.9 TDI Quattro

For the Audi A4 Avant 1.9 TDI Quattro, we have highlighted the most critical parts that often require replacement to maintain proper handling and driving dynamics. Our inventory is tailored to cover all power transmission requirements for this specific model variant. Below is an overview of the categories available:

  • Drive shafts: We stock 10 distinct drive shaft options to cover both front and rear axles across various transmission types.
  • CV joints: We offer 5 outer and 5 inner CV joints, providing comprehensive coverage for every position on the vehicle.
  • Propeller shaft: A dedicated prop shaft designed to match the specific length and mounting points of the Quattro system.
  • ABS rings: 2 precision-engineered ABS rings, essential for ensuring the car's braking and safety systems function accurately.

These components are manufactured to meet or exceed original equipment standards. This is particularly vital on an all-wheel-drive car, where close tolerances between the axles are necessary to avoid premature wear on the differentials.

Finding the right part for your Audi A4 Avant 1.9 TDI Quattro

Navigate directly to the appropriate section for the Audi A4 Avant 1.9 TDI Quattro:

When diagnosing driveline faults, starting in the right category saves time. By comparing the dedicated part categories for the Audi A4 Avant 1.9 TDI Quattro, you can readily distinguish between drive shaft, CV joint or propeller shaft issues and proceed to the page that matches your car's symptoms and fitment.

Choosing the correct spare part for an Audi A4 Avant can occasionally be complex, as variations exist depending on chassis number, production date, and whether the car is fitted with a manual or automatic gearbox. The most reliable method to browse our range is by selecting your exact make, model and engine variant. This instantly filters the catalogue to show the 24 components engineered to fit your specific car.

Before finalising your order, we advise checking technical details such as the tooth count on the ABS ring or the overall length of the driveshaft, as these dimensions can differ between variants. By buying from a dedicated specialist, you avoid costly fitment errors and keep your Quattro drivetrain running smoothly. Our database is regularly updated to ensure maximum accuracy, giving you total peace of mind that your new parts will fit first time.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist shipping across the EU from our warehouse in Helsingborg, Sweden. Unlike general car parts retailers, we offer deep technical knowledge and a product range exclusively dedicated to driveline and power transmission components. When ordering parts for your Audi A4 Avant 1.9 TDI Quattro from us, you receive high-calibre components alongside our comprehensive fitment guarantee, helping you avoid unnecessary delays in the garage.

With prompt dispatch on all in-stock items, we help get your Audi back on the road without delay. Our quality-first approach means we only supply components built to endure harsh European road conditions and the corrosive effects of winter road salt. At CVJoint24, you can rely on specialist expertise, swift European shipping, and the right part for your vehicle every time.

Frequently Asked Questions about the Drivetrain for Audi A4 Avant 1.9 TDI Quattro

How do I know if my Audi A4 Avant 1.9 TDI Quattro needs a new drive shaft?

The most common signs are heavy vibrations under acceleration or unusual noises from the underside of the car. If you find that a CV joint is completely worn out or the shaft has suffered mechanical damage, replacing the complete drive shaft is often the most cost-effective solution.

What is the function of the propeller shaft on a Quattro model?

The propeller shaft is the central link that transfers engine power from the front gearbox to the rear axle differential. On an Audi A4 Avant 1.9 TDI Quattro, it is vital for the four-wheel drive system to function and distribute drive to the rear wheels.

Why does the ABS ring crack on an Audi A4?

This is usually caused by corrosion building up on the CV joint underneath the ring itself. As rust expands, it creates pressure from within that eventually cracks the metal ring, preventing the sensor from reading the wheel speed correctly.

What is the difference between an inner and an outer CV joint?

The outer CV joint is located at the wheel and accommodates both steering angles and suspension movement; when worn, it typically produces clicking noises. The inner CV joint sits at the gearbox and mainly accommodates changes in drive shaft length; wear here usually leads to vibrations.

Can I replace just the CV boot instead of the entire CV joint?

Yes, if you catch a split boot early before dirt has contaminated and damaged the joint's bearing surfaces, you can replace just the CV boot. However, if the joint has already begun clicking or vibrating, it is permanently damaged and must be replaced.

How do I ensure the part fits my Audi A4 Avant 1.9 TDI Quattro?

Select your vehicle's make, model, and engine variant on cvjoint24.com. This is the most reliable way to filter for parts that match the exact specifications of your car's drivetrain and Quattro system.