Audi Allroad
Spare parts and drivetrain components for the Audi Allroad.
Products for Audi Allroad
- Position: Front right
- Flange diameter: 123 mm
- Total length: 620 mm
- Splines wheel side: 38
- ABS teeth: 45
- Position: Front left
- Flange diameter: 123 mm
- Total length: 605 mm
- Splines wheel side: 38
- Diameter: 30 mm
- Height: 105 mm
- Hole spacing c/c: 241 mm
- Bearing thickness: 15 mm
- Position: Outer
- ABS teeth: 45
- Seal diameter: 59 mm
- Inner splines: 27
- Outer splines: 38
- Number of centre bearings: 1
- Number of joints: 2
- Total length: 1,529 mm
- ABS teeth: 45
- Inner diameter: 77 mm
- Outer diameter: 81 mm
- Width: 11 mm
- Position: Front
- ABS teeth: 45
- Inner diameter: 77 mm
- Outer diameter: 81 mm
- Width: 11 mm
- Position: Front right
- Flange diameter: 123 mm
- Total length: 490 mm
- Splines wheel side: 38
- ABS teeth: 45
- Position: Front left, Front right
- Flange diameter: 123 mm
- Joint diameter: 123 mm
- Total length: 544 mm
- ABS teeth: 45
- Diameter: 30 mm
- Height: 82 mm
- Hole spacing c/c: 241 mm
- Bearing thickness: 13 mm
- Position: Rear
- Number of centre bearings: 1
- Number of joints: 3
- Total length: 1,755 mm
- Position: Front left
- Flange diameter: 130 mm
- Total length: 625 mm
- Splines wheel side: 38
- ABS teeth: 45
- Number of centre bearings: 1
- Number of joints: 2
- Total length: 1,655 mm
- Position: Rear
- Number of centre bearings: 1
- Number of joints: 3
- Total length: 1,730 mm
- Position: Rear
- Diameter: 94 mm
- Total length: 655 mm
- Splines wheel side: 38
- ABS teeth: 45
- Position: Front right
- Total length: 505 mm
- Position: Front right
- Flange diameter: 123 mm
- Total length: 622 mm
- Splines wheel side: 38
- ABS teeth: 45
Audi Allroad drivetrain
The Audi Allroad is renowned for its versatility and advanced all-wheel-drive system, placing high demands on every single component in the powertrain. To handle the stresses of both motorway cruising and demanding off-road driving, a drivetrain in peak condition is essential. At CVJoint24, we are Swedish driveline specialists with an extensive range tailored specifically for the Audi Allroad. With 43 matched products in our catalogue, we cover virtually every requirement for repair and maintenance. We focus on supplying components that meet or exceed original equipment specifications, which is vital for a vehicle featuring such complex technology. Maintaining the drivetrain is not merely a matter of comfort, but also of safety and long-term durability.
How the Audi Allroad drivetrain is built
The drivetrain on an Audi Allroad is a sophisticated assembly designed to distribute power to all four wheels smoothly and efficiently. The system comprises several critical components working together: the gearbox transfers power via an Audi Allroad propeller shaft to the rear axle, while front and rear drive shafts deliver torque directly to the wheels. Each drive shaft is fitted with an inner Audi Allroad CV joint and an outer constant velocity joint to accommodate suspension travel and steering angles. Because the Audi Allroad is frequently equipped with air suspension that adjusts ground clearance, the CV joints operate through varying angles. This demands exceptional material quality and durable CV boots capable of protecting the precision bearings from dirt and moisture at all times.
Common faults and symptoms
Several distinct symptoms indicate that a component in your Audi Allroad drivetrain is worn or failing. One of the most common signs is a rhythmic clicking noise on full steering lock at low speeds, which almost always points to a worn outer Audi Allroad CV joint. Vibrations that occur specifically under acceleration, on the other hand, are typically caused by worn inner joints or imbalance in the prop shaft. If your ABS intervenes unexpectedly or the brake warning light illuminates, a cracked or corroded Audi Allroad ABS ring may be to blame. Ignoring these early warning signs can lead to far more expensive secondary damage to the gearbox and differentials, making prompt diagnosis and repair the most cost-effective approach.
Common parts to replace on the Audi Allroad
Depending on mileage and driving conditions, certain components on this model statistically require replacement more frequently. Our range is carefully organised so you can quickly find the right parts for your Audi Allroad:
- Drive shafts: We stock 16 different driveshaft variants for the Audi Allroad to cover various positions and engine specifications.
- Propeller shafts: With 13 prop shafts available, we can quickly resolve vibration issues originating from the vehicle's centre section.
- CV joints: We stock both inner (5 items) and outer (3 items) joints, allowing for cost-effective repairs without having to replace the complete shaft.
- ABS rings: We offer 6 different ABS reluctor rings specifically designed to restore accurate sensor signals to your vehicle's safety systems.
By selecting the correct parts, you ensure that your vehicle's power delivery remains smooth, quiet, and efficient, exactly as intended for a premium all-wheel-drive model.
How to find the right part for your Audi Allroad
Navigate directly to the relevant subcategory for your Audi Allroad:
When addressing driveline issues, it is best to start in the correct category right away. By browsing the specific sections for the Audi Allroad, you can easily distinguish between drive shaft, CV joint, or propeller shaft faults and proceed to the section that best matches your symptoms and fitment needs.
- Drive shafts for Audi Allroad
- Outer CV joints for Audi Allroad
- Inner CV joints for Audi Allroad
- Propeller shafts for Audi Allroad
- ABS rings for Audi Allroad
Navigating technical specifications can be challenging given the complexity of an all-wheel-drive system. To make finding the right car parts simple, you can easily filter our catalogue by your vehicle's make, model, and engine. This instantly narrows our range down to the 43 products technically compatible with your specific Audi Allroad. However, do check details such as whether your car has a manual or automatic gearbox, as this often affects driveshaft lengths and inner joint profiles. Our catalogue is continuously updated to ensure accurate fitment data, helping you order with confidence and get your car back on the road without delay.
Why buy from CVJoint24?
As Swedish driveline specialists shipping across the EU from our central warehouse in Helsingborg, Sweden, we offer an unrivalled blend of technical expertise and focused inventory that general motor factors struggle to match. Because we specialise exclusively in driveline parts, we provide a higher level of dedicated support for your Audi Allroad. All our spare parts are chosen for exceptional durability and precise fitment, engineered to withstand demanding European road and winter conditions. Road salt and damp take a heavy toll on underbody components, particularly CV boots and ABS rings. With our quality-tested components, you can be confident that your Audi Allroad will remain a dependable, high-performing vehicle on motorways and rough tracks alike.
Frequently Asked Questions about Drivetrain Parts for Audi Allroad - High-Quality Spare Parts
How do I know if my Audi Allroad needs a new drive shaft?
The most common signs are strong vibrations in the steering wheel or seat under acceleration, along with unusual noises. If a CV boot has split and the grease has leaked out, there is a high risk that the entire drive shaft or CV joint will need replacing.
What is the difference between an inner and an outer CV joint on an Audi Allroad?
The outer CV joint sits closest to the wheel and allows steering; when worn, it usually emits a clicking noise when turning. The inner CV joint sits closest to the gearbox and typically causes vibrations during acceleration if it is defective.
Why is the ABS warning light on in my Audi Allroad?
A very common cause is a cracked ABS ring due to corrosion, which disrupts the signal to the sensor. We stock 6 different ABS rings specifically for the Audi Allroad, allowing you to fix the fault without replacing the entire CV joint.
Do all propeller shafts fit all Audi Allroad models?
No, the propeller shaft length and mountings vary depending on the engine option and gearbox type. Always select your specific make, model and engine variant in our search tool to find the correct prop shaft among our 13 models.
Can I replace just the CV boot if it is split?
Yes, if you catch the damage early before dirt and grit have entered the joint, replacing just the boot may be sufficient. However, if the joint has already started making noises, the entire CV joint or shaft must be replaced.
How many drive shafts are there on an Audi Allroad?
Because the Audi Allroad is four-wheel drive, it has a total of four drive shafts – two at the front and two at the rear – as well as a propeller shaft that transfers power between the front and rear axles.