Audi Allroad
Spare parts and drivetrain components for Audi Allroad.
Products for Audi Allroad
- Diameter: 30 mm
- Bearing thickness: 13 mm
- Hole spacing c/c: 241 mm
- Height: 82 mm
- Position: Front left
- Splines wheel side: 38
- Total length: 606 mm
- Joint diameter: 98 mm
- ABS teeth: 45
- Position: Front right
- Splines wheel side: 38
- Total length: 627 mm
- Joint diameter: 98 mm
- ABS teeth: 45
- Position: Rear
- Splines wheel side: 38
- Total length: 654 mm
- Joint diameter: 98 mm
- ABS teeth: 45
- Diameter: 30 mm
- Bearing thickness: 13 mm
- Hole spacing c/c: 241 mm
- Height: 82 mm
Audi Allroad drivetrain
The Audi Allroad is renowned for its versatility and advanced all-wheel-drive system, which places high demands on every single component in the power transmission. Coping with the stresses of both motorway cruising and demanding off-road conditions requires a drivetrain in peak condition. At CVJoint24, we are Swedish driveline specialists with an extensive range tailored specifically for the Audi Allroad. With broad coverage across our catalogue, we cater for virtually every repair and maintenance requirement. We focus on providing components that meet or exceed original equipment specifications, which is vital for a vehicle engineered with such sophisticated technology. Maintaining the drivetrain is not merely a matter of ride comfort, but of safety and long-term vehicle reliability.
How the Audi Allroad drivetrain is configured
The drivetrain on an Audi Allroad is a sophisticated assembly engineered to distribute power across all four wheels smoothly and efficiently. The system relies on several critical components working together: the gearbox delivers power via an Audi Allroad propeller shaft to the rear axle, whilst front and rear drive shafts transfer torque directly to the wheels. Each drive shaft is fitted with both an Audi Allroad inner CV joint and an outer joint to accommodate suspension travel and steering angles. Because the Audi Allroad frequently features air suspension that alters ride height, the CV joints operate across varying angles during driving. This demands exceptional material quality in the constant velocity joints and durable CV boots capable of protecting sensitive bearings against dirt and moisture in all conditions.
Common faults and symptoms
There are several distinct signs that a component in your Audi Allroad drivetrain is worn or failing. One of the most typical symptoms is a rhythmic clicking noise on full steering lock at low speeds, which almost always points to a worn Audi Allroad outer CV joint. Vibrations that occur specifically under acceleration can often be traced back to worn inner joints or an unbalanced prop shaft. If your ABS intervenes prematurely or the brake warning light illuminates on the dashboard, a cracked or corroded Audi Allroad ABS ring is often to blame. Ignoring these early warning signs can lead to far costlier secondary damage to the gearbox and differentials, making prompt diagnosis and repair the most sensible course of action.
Common replacement parts for Audi Allroad
Depending on mileage and driving conditions, certain components on this model naturally require replacement more often. Our catalogue is clearly organised so you can navigate directly to the right category for your Audi Allroad:
- Drive shafts: We supply multiple Audi Allroad drive shaft options to cover different axle positions and engine specifications.
- Propeller shafts: With several propeller shafts in stock, we help resolve driveline vibrations stemming from the centre section.
- CV joints: We stock both inner (5 parts) and outer (3 parts) joints, enabling cost-effective repairs without replacing the complete driveshaft assembly.
- ABS rings: We stock several ABS reluctor rings engineered to restore accurate sensor signals to the vehicle safety systems.
By selecting the correct category and part, you ensure your car's power delivery remains smooth, quiet and efficient, just as expected from a premium vehicle in this class.
Finding the right part for your Audi Allroad
Select the relevant category for your Audi Allroad:
On a vehicle with several possible driveline issues, starting in the right section saves time. By comparing the specific subcategories for the Audi Allroad, you can more easily distinguish between drive shaft, CV joint and propeller shaft faults and proceed to the page that matches your symptoms and fitment.
- Drive shafts for Audi Allroad
- Outer CV joints for Audi Allroad
- Inner CV joints for Audi Allroad
- Propeller shafts for Audi Allroad
- ABS rings for Audi Allroad
Navigating technical specifications and different variants can be tricky, especially given the complexity of an all-wheel-drive system. To make finding parts straightforward, you can easily filter our range by selecting your vehicle's make, model and engine. This instantly displays the car parts compatible with your specific Audi Allroad. Pay close attention to details such as whether your car has a manual or automatic gearbox, as this frequently affects drive shaft length and inner joint design. Our database is continuously refined to give you accurate information immediately, preventing incorrect orders and getting your vehicle back on the road with precision-fit parts.
Why shop at CVJoint24
As Swedish driveline specialists, we combine dedicated technical expertise with a specialised range that general motor factors rarely match. Because our focus is entirely on drivetrain components, we offer deep product knowledge and reliable support for your Audi Allroad. When you buy from us, you receive spare parts selected for their durability and exact fitment, built to withstand harsh European winters. We understand the toll that road salt and moisture take on a car's underbody, particularly on CV boots and ABS rings. With our quality-tested parts and guidance, you can be confident your Audi Allroad will deliver dependable, refined performance whether tackling motorways or rough country tracks.
Frequently Asked Questions about Drivetrain Parts for Audi Allroad - High-Quality Spare Parts
How do I know if my Audi Allroad needs a new drive shaft?
The most common signs are strong vibrations in the steering wheel or seat under acceleration, along with unusual noises. If a CV boot has split and the grease has leaked out, there is a high risk that the entire drive shaft or CV joint will need replacing.
What is the difference between an inner and an outer CV joint on an Audi Allroad?
The outer CV joint sits closest to the wheel and allows steering; when worn, it usually emits a clicking noise when turning. The inner CV joint sits closest to the gearbox and typically causes vibrations during acceleration if it is defective.
Why is the ABS warning light on in my Audi Allroad?
A very common cause is a cracked ABS ring due to corrosion, which disrupts the signal to the sensor. We stock 6 different ABS rings specifically for the Audi Allroad, allowing you to fix the fault without replacing the entire CV joint.
Do all propeller shafts fit all Audi Allroad models?
No, the propeller shaft length and mountings vary depending on the engine option and gearbox type. Always select your specific make, model and engine variant in our search tool to find the correct prop shaft among our 13 models.
Can I replace just the CV boot if it is split?
Yes, if you catch the damage early before dirt and grit have entered the joint, replacing just the boot may be sufficient. However, if the joint has already started making noises, the entire CV joint or shaft must be replaced.
How many drive shafts are there on an Audi Allroad?
Because the Audi Allroad is four-wheel drive, it has a total of four drive shafts – two at the front and two at the rear – as well as a propeller shaft that transfers power between the front and rear axles.