Audi Allroad 2.5 TDI Quattro

Spare parts and drivetrain components for Audi Allroad 2.5 TDI Quattro. Select your car by make, model and engine to verify fitment before ordering.

Products for Audi Allroad 2.5 TDI Quattro

29 products
1 - 24 of 29
Item no.:2183008
  • Position: Front right
  • Flange diameter: 123 mm
  • Total length: 620 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:1128543
  • Position: Front left
  • Flange diameter: 123 mm
  • Total length: 605 mm
  • Splines wheel side: 38
Item no.:0274873
  • Diameter: 30 mm
  • Height: 105 mm
  • Hole spacing c/c: 241 mm
  • Bearing thickness: 15 mm
Item no.:0456626
  • Position: Inner
  • Seal diameter: 123 mm
  • Inner splines: 34
Item no.:0531860
  • Position: Outer
  • ABS teeth: 45
  • Seal diameter: 59 mm
  • Inner splines: 27
  • Outer splines: 38
Item no.:0277877
  • Number of centre bearings: 1
  • Number of joints: 2
  • Total length: 1,529 mm
Item no.:0330173
  • ABS teeth: 45
  • Inner diameter: 77 mm
  • Outer diameter: 81 mm
  • Width: 11 mm
Item no.:332213
  • Position: Front
  • ABS teeth: 45
  • Inner diameter: 77 mm
  • Outer diameter: 81 mm
  • Width: 11 mm
Item no.:0668981
  • Position: Front
  • Diameter: 91 mm
  • Outer diameter: 24 mm
Item no.:1107814
  • Position: Front left
  • Flange diameter: 130 mm
  • Total length: 625 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:2125931
  • Position: Front right
  • Flange diameter: 123 mm
  • Total length: 490 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:3108049
  • Position: Front left, Front right
  • Flange diameter: 123 mm
  • Joint diameter: 123 mm
  • Total length: 544 mm
  • ABS teeth: 45
Item no.:0235148
  • Diameter: 30 mm
  • Height: 82 mm
  • Hole spacing c/c: 241 mm
  • Bearing thickness: 13 mm
Item no.:0256346
  • Number of centre bearings: 1
  • Number of joints: 2
  • Total length: 1,655 mm
Item no.:6289524
  • Position: Rear
  • Number of centre bearings: 1
  • Number of joints: 3
  • Total length: 1,730 mm
Item no.:6293415
  • Position: Rear
  • Number of centre bearings: 1
  • Number of joints: 3
  • Total length: 1,755 mm
Item no.:0222163
  • Position: Inner
  • Inner splines: 25
  • Joint diameter: 100 mm
Item no.:0687329
  • Height: 85 mm
  • Inner diameter: 22 mm
  • Outer diameter: 80 mm
Item no.:2146419
  • Position: Front right
  • Total length: 505 mm
Item no.:212723
  • Total length: 525 mm
  • Splines wheel side: 38
Item no.:628615
  • Total length: 1,664 mm
Item no.:2184773
  • Position: Front right
  • Flange diameter: 123 mm
  • Total length: 622 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Showing 1–24 of 29 products

Audi Allroad 2.5 TDI Quattro

The Audi Allroad 2.5 TDI Quattro is an iconic vehicle known for its unique blend of comfort and all-terrain capability, courtesy of its air suspension and legendary Quattro system. Maintaining its performance and safety requires a healthy drivetrain that can reliably distribute the substantial torque of the 2.5 TDI engine across all four wheels. As driveline specialists, we stock a carefully chosen range of parts tailored specifically to this model, which is vital since the Allroad often features reinforced components compared to standard models. By focusing on premium quality and an exact fit, we ensure your car remains dependable for thousands of kilometres to come, whether cruising on motorways or tackling rugged tracks. We understand the technical nuances of this sophisticated drivetrain and have built up an inventory that meets the expectations of Audi drivers who demand high-grade car parts.

How the drivetrain works on the Audi Allroad 2.5 TDI Quattro

The drivetrain on an Audi Allroad 2.5 TDI Quattro is both robust and intricate, engineered to maximise grip through permanent Quattro all-wheel drive. Power from the longitudinally mounted V6 engine is directed through the gearbox to a central Torsen differential, where a propeller shaft delivers torque rearward to the rear axle. Up front, drive shafts transfer power to the front wheels, while the rear wheels are powered via the rear differential and matching axles. Each wheel utilises inner and outer CV joints to accommodate significant suspension travel, which is particularly demanding on the Allroad with its adjustable ride height. This permanent four-wheel-drive system requires every element to work in seamless harmony; the slightest imbalance or play in a joint or shaft can send vibrations and noises throughout the entire car. Understanding how the front and rear driveline interact is key to proper maintenance, and we supply the exact technical components needed to keep the system in prime condition.

Common faults and symptoms

There are several clear warning signs that drivetrain components are wearing out on your Audi Allroad 2.5 TDI Quattro, and acting promptly prevents costly breakdowns. One of the most frequent symptoms is a rhythmic clicking or knocking noise on full steering lock while accelerating, which almost always points to a worn outer CV joint caused by road dirt ingress or grease loss. Vibrations felt through the floorpan or seats under acceleration, which vanish when you ease off the throttle, typically indicate a failing inner constant velocity joint or wear in the propeller shaft centre bearing. If the ABS warning light illuminates or the ABS pulses jerkily during low-speed braking, the cause is often a cracked or heavily corroded ABS ring feeding faulty signals to the control unit. Ignoring these early warning signs can lead to severe consequential damage to the gearbox and differentials, making timely diagnosis and replacement a sensible investment in your car's reliability and value.

Frequent replacements for Audi Allroad 2.5 TDI Quattro

Owing to the substantial kerb weight and continuous torque handled by the Quattro system, certain components on the Audi Allroad 2.5 TDI Quattro endure heavy wear. We carry an extensive selection of drive shafts, offering seven distinct variants to suit all positions and configurations for this engine variant. Alongside complete driveshafts, replacing individual CV joints and CV boots is a routine maintenance task; a split drive shaft boot allows grease to escape and abrasive dirt to ruin the joint rapidly. The prop shaft is another vital component, and with four variants available in our range, we supply dependable fixes for the driveline vibrations that emerge at higher mileages when universal joints or centre bearings degrade. ABS reluctor rings also wear out over time as rust builds up beneath them, eventually causing them to snap. Choosing the correct replacement car parts from our range ensures your Audi retains its exceptional traction and refined driving feel without unwanted shudder or noise.

Finding the right part for your Audi Allroad 2.5 TDI Quattro

Browse directly to the relevant category for your Audi Allroad 2.5 TDI Quattro:

When diagnosing complex driveline issues, it helps to start in the correct component section straight away. By comparing the dedicated product categories for the Audi Allroad 2.5 TDI Quattro, you can readily tell whether you need a drive shaft, a CV joint or a prop shaft, and proceed to the section that matches your symptoms and specifications.

Navigating to these dedicated pages provides detailed technical specifications and critical dimensions, allowing you to confirm that you are ordering the exact spare parts required for a fault-free repair. Our catalogue is regularly updated to cover every technical variation across the 2.5 TDI Quattro range.

Why shop with CVJoint24

CVJoint24 is the international shop of a Swedish driveline specialist, supported by our central warehouse in Helsingborg, Sweden, and dedicated to technical expertise and customer support. We know that Audi Allroad drivers expect dependable spare parts, which is why we only supply tried-and-tested components that meet rigorous European quality standards. When you buy from us, you benefit from one of Europe's widest driveline selections and our accurate fitment guarantee when matching your car by make, model and engine. Our goal is to help you pick the right part first time, saving both time and labour costs in the garage. With fast, dependable shipping across the European Union, we are your reliable partner when you need to get your car back on the road without delay. Choose CVJoint24 for specialist knowledge and parts that let your Audi Allroad 2.5 TDI Quattro deliver the capability it was engineered for.

Frequently asked questions about the drivetrain for Audi Allroad 2.5 TDI Quattro

How do I know which drive shaft fits my Audi Allroad 2.5 TDI Quattro?

The most reliable way is to select your car's exact make, model and engine variant in our search tool. Because the Allroad model features specific dimensions and reinforced components, we filter out the parts that are guaranteed to fit your vehicle.

What are the most common signs of a worn outer CV joint?

A clear sign is a clicking or knocking noise heard at full steering lock, especially under acceleration. This is often caused by dirt entering the joint through a damaged CV boot.

Do I need to replace the complete drive shaft or just the CV joint?

If only the joint is worn and the shaft is otherwise undamaged, replacing just the CV joint is usually sufficient. However, if the shaft is corroded or several joints are failing, replacing the complete drive shaft can be more cost-effective.

Why does my Audi Allroad vibrate during acceleration?

Vibrations under acceleration are often caused by wear in the inner CV joints or an imbalance in the propeller shaft. It is important to inspect these components to prevent damage to the gearbox.

Do drivetrain components from other four-wheel-drive models fit my Allroad?

Usually not. The Audi Allroad features a unique chassis design with adjustable ground clearance, meaning drive shafts and CV joints often have different dimensions and working angles compared to standard models.

What is included when I buy a CV joint from you?

When you purchase a CV joint from us, it normally includes everything you need for the replacement: the CV joint itself, a vehicle-specific CV boot, high-grade grease, circlips and clamps.