Audi Q5 2.0 TDI Quattro
Car parts and drivetrain components for Audi Q5 2.0 TDI Quattro. Always check the fit before ordering.
Products for Audi Q5 2.0 TDI Quattro
- Number of centre bearings: 1
- Number of joints: 3
- Total length: 1,525 mm
- Number of centre bearings: 1
- Number of joints: 3
- Total length: 1,477 mm
- Number of centre bearings: 1
- Number of joints: 3
- Total length: 1,645 mm
- Position: Front left, Front right
- Flange diameter: 123 mm
- Total length: 495 mm
- Splines wheel side: 42
- Position: Front, Inner
- Total length: 84 mm
- Splines wheel side: 24
- Position: Rear left, Rear right
- Flange diameter: 108 mm
- Total length: 660 mm
- Splines wheel side: 42
- Position: Outer
- Seal diameter: 76 mm
- Inner splines: 27
- Outer splines: 42
- Joint diameter: 100 mm
- Position: Outer
- Seal diameter: 76,5 mm
- Inner splines: 25
- Outer splines: 42
- Position: Front, Outer
- Inner splines: 28
- Outer diameter: 94 mm
- Splines wheel side: 42
- Position: Rear
- Number of centre bearings: 1
- Number of joints: 3
- Total length: 1,521 mm
- Position: Outer
- Seal diameter: 77 mm
- Inner splines: 29
- Outer splines: 42
- Position: Front left, Front right
- Flange diameter: 134 mm
- Total length: 492 mm
- Splines wheel side: 42
- Position: Rear
- Number of centre bearings: 1
- Number of joints: 3
- Total length: 1,680 mm
- Position: Outer
- Seal diameter: 76,5 mm
- Inner splines: 29
- Outer splines: 42
- Position: Outer
- Seal diameter: 76,5 mm
- Inner splines: 33
- Outer splines: 42
- Joint diameter: 88 mm
- Number of centre bearings: 1
- Number of joints: 3
- Total length: 1,475 mm
- Diameter: 30 mm
- Height: 85 mm
- Hole spacing c/c: 228 mm
- Bearing thickness: 15 mm
- Position: Outer
- Inner splines: 33
- Outer diameter: 88 mm
- Splines wheel side: 42
Frequently asked questions about Drivetrain parts for Audi Q5 2.0 TDI Quattro
How do I know if my Audi Q5 2.0 TDI Quattro needs a new drive shaft?
The most common signs are vibrations under acceleration or unusual noises when driving. If you notice that vibrations increase with speed or engine load, it often indicates an unbalanced drive shaft or a worn CV joint.
Do all CV joints fit all Audi Q5 models?
No, there are variations depending on the engine option, gearbox and model year. For the 2.0 TDI Quattro, it is important to check the splines and dimensions. Always select your vehicle's make, model and engine to find the right part.
What are the symptoms of a worn propeller shaft on a Quattro?
A worn propeller shaft often causes vibrations felt throughout the entire car, especially at specific speed ranges. You may also hear a whining or grinding noise from the centre bearing or universal joints along the prop shaft.
What is the difference between an inner and outer CV joint on my Audi?
The outer CV joint sits at the wheel and accommodates steering angles; it typically produces clicking noises when cornering. The inner CV joint sits at the gearbox or differential and primarily absorbs suspension movement; it typically causes vibrations under acceleration.
Can I replace just the CV boot if the joint still feels fine?
Yes, if you catch a split CV boot early before dirt and moisture have damaged the joint, you can replace just the boot. This is a cost-effective preventative repair that significantly extends the lifespan of the CV joint.
How quickly do you deliver parts for Audi Q5?
We aim to dispatch your order promptly across the EU for our stocked items for Audi Q5 2.0 TDI Quattro, helping you get your car back on the road as quickly as possible.