Audi Q5
Spare parts and drivetrain components for the Audi Q5.
Products for Audi Q5
- Position: Inner
- Inner splines: 34
- Total length: 88 mm
- Joint diameter: 123 mm
- Outer splines: 34
- Total length: 1,525 mm
- Number of joints: 3
- Number of centre bearings: 1
- Total length: 1,476 mm
- Number of joints: 3
- Number of centre bearings: 1
- Total length: 1,645 mm
- Number of joints: 3
- Number of centre bearings: 1
- Position: Front, Inner
- Inner splines: 27
- Splines gearbox side: 34
- Total length: 89 mm
- ABS teeth: 34
- Position: Rear
- Splines wheel side: 42
- Total length: 660 mm
- Joint diameter: 99 mm
- Joint diameter, gearbox side: 108 mm
- Position: Outer
- Inner splines: 27
- Seal diameter: 76 mm
- Outer splines: 42
- Thread size: M16X1,5
- Position: Rear
- Total length: 1,521 mm
- Number of joints: 3
- Number of centre bearings: 1
- Position: Outer
- Inner splines: 29
- Seal diameter: 77 mm
- Outer splines: 42
- Thread size: M16X1,5
- Position: Inner
- Inner splines: 27
- Joint diameter: 134 mm
- Outer splines: 27
- Position: Rear
- Total length: 1,680 mm
- Number of joints: 3
- Number of centre bearings: 1
- Position: Outer
- Inner splines: 29
- Seal diameter: 76,5 mm
- Outer splines: 42
- Thread size: M16X1,5
- Total length: 1,475 mm
- Number of joints: 3
- Number of centre bearings: 1
- Bearing thickness: 15 mm
- Hole spacing c/c: 228 mm
- Height: 85 mm
- Position: Front
- Splines wheel side: 42
- Total length: 492 mm
- Joint diameter: 103 mm
- Joint diameter, gearbox side: 134 mm
- Position: Outer
- Inner splines: 30
- Splines wheel side: 42
- Seal diameter: 76 mm
- Outer splines: 42
- Position: Outer
- Inner splines: 25
- Seal diameter: 76,5 mm
- Outer splines: 42
- Thread size: M16X1,5
- Position: Front
- Splines wheel side: 42
- Total length: 495 mm
- Joint diameter: 88 mm
- Joint diameter, gearbox side: 123 mm
- Position: Outer
- Inner splines: 33
- Seal diameter: 76,5 mm
- Outer splines: 42
- Thread size: M16X1,5
- Position: Outer
- Inner splines: 28
- Seal diameter: 76 mm
- Outer splines: 42
- Thread size: M16X1,5
- Position: Rear left
- Splines wheel side: 42
- Total length: 620 mm
- Diameter 2: 108 mm
- Position: Rear right
- Splines wheel side: 42
- Total length: 576 mm
Audi Q5 drivetrain
The Audi Q5 is a vehicle renowned for its blend of comfort and all-terrain capability, which places high demands on its drivetrain. The power transmission is the heart of the car's driving dynamics, responsible for channelling engine torque to the wheels smoothly and without vibration. Here at CVJoint24, you will find a carefully chosen range of components specifically engineered to meet the technical requirements of the Audi Q5. Our extensive inventory covers everything from small CV boots to complete propeller shafts. Maintaining the drivetrain is not merely a matter of driving pleasure; it also ensures safety and the long-term durability of the vehicle's other mechanical systems. By choosing the right car parts, you ensure your Audi continues to deliver the premium feel you expect from the marque. We focus on supplying parts that not only fit physically, but also endure the heavy loads to which a modern SUV is subjected daily.
How the drivetrain is engineered on the Audi Q5
The drivetrain on an Audi Q5 is typically built around the renowned Quattro system, distributing power between both the front and rear axles. The layout incorporates a gearbox that sends torque back to the rear differential via an Audi Q5 propeller shaft. At the front, drive shafts handle both steering and traction, leaving the outer CV joints particularly exposed to heavy stress. This advanced setup requires high-precision components to minimise power loss and vibrations. Because the Q5 is a substantial car with generous ground clearance, the linkages and joints operate through wider angles and under greater loads than in ordinary hatchbacks or saloons. High material quality and manufacturing accuracy are therefore vital to component longevity. We supply parts tailored to these exact requirements for both front-wheel-drive and Quattro four-wheel-drive models, ensuring seamless power delivery whatever the road surface or driving conditions.
Common faults and symptoms
There are several clear signs that a drivetrain component on your Audi Q5 is beginning to fail. One of the most typical symptoms is a clicking or knocking sound on full steering lock, which usually points to a worn Audi Q5 outer CV joint or a split boot. If you instead experience chassis vibrations under acceleration, an Audi Q5 inner CV joint may have developed play. On Quattro-equipped cars, high-speed vibrations are frequently linked to an imbalanced prop shaft or a worn centre bearing. Acting promptly on these symptoms is essential: a torn drive shaft boot that loses its grease quickly lets in grit and moisture, destroying the constant velocity joint and leading to far more expensive repairs. Furthermore, a cracked ABS ring on the joint can trigger warning lights in the safety systems, compromising both braking performance and electronic stability control.
Common parts to replace on the Audi Q5
Depending on your driving style and mileage, certain components are replaced more regularly on an Audi Q5. Our catalogue is structured so you can swiftly identify the right category and part for your model year. Here are the most frequently requested product groups for this model:
- Drive shafts: We supply multiple Audi Q5 drive shaft options for both the front and rear axles, offering a complete solution for severe wear.
- Outer CV joints: With a broad selection of items, we cover most engine variants where steering angle forces on the outer joints are highest.
- Inner CV joints: We offer 15 dedicated inner joints, crucial for curing driveline shudder under acceleration from the gearbox.
- Propeller shafts: For Quattro models, we stock a wide selection of propeller shafts, representing one of our most comprehensive ranges for this platform.
These components are vital for preserving vehicle stability and driveability. Replacing an entire driveshaft can often prove more economical than changing an individual joint, especially if the shaft shows surface corrosion or physical damage affecting its balance.
How to find the right part for your Audi Q5
Navigate directly to the relevant category for your Audi Q5:
With several possible sources of driveline noise or play, identifying the correct area first makes diagnostics simpler. Comparing the specific subcategories for the Audi Q5 helps distinguish whether a fault lies in a drive shaft, a CV joint or the propeller shaft, guiding you directly to the correct fitment.
- Drive shafts for Audi Q5
- Outer CV joints for Audi Q5
- Inner CV joints for Audi Q5
- Propeller shafts for Audi Q5
Navigating 103 different drivetrain components might seem daunting, but we have made the selection process simple and dependable. The most reliable way to find the exact replacement for your Audi Q5 is to filter our catalogue by your vehicle's make, model and engine. This narrows the parts list down to items that are fully compatible with your car. This is especially important for the Audi Q5, where spline counts, overall lengths and flange patterns vary according to engine size, gearbox type (manual or S-tronic) and whether the car is Quattro-equipped. If you require further confirmation, check the original equipment (OEM) part number against the technical specifications listed on our product pages. Our aim is to ensure your ordered spare parts fit straight out of the box, saving you both time and garage labour costs.
Why shop at CVJoint24
CVJoint24 is not merely an ordinary car parts retailer; we are the international shop of a Swedish driveline specialist, focusing exclusively on drivelines and power transmission. When you buy components for your Audi Q5 from us, you benefit from specialist expertise that general parts stores rarely provide. We understand the engineering nuances of Audi models and stock only components manufactured to high standards. Our deep category coverage means we routinely have items on the shelf that are hard to source elsewhere, such as specific Quattro prop shafts and inner joints. Dispatched quickly from our Swedish warehouse in Helsingborg and supported by a customer service team that knows drivelines inside out, we deliver complete reassurance from initial ordering to final fitting. We combine specialist know-how with competitive prices to deliver outstanding value for your Audi, whether you are completing the work yourself or using a professional garage.
Frequently Asked Questions about Audi Q5 Drivetrain – Power Transmission Spare Parts
How do I know if my Audi Q5 needs a new drive shaft?
The most common signs are vibrations under acceleration or noises when cornering. If the vibrations can be felt throughout the car, it is often the inner CV joint or the propeller shaft, whilst clicking noises when turning indicate a worn outer CV joint.
Do all CV joints fit every Audi Q5 model?
No, there are significant differences depending on the engine, gearbox and model year. Always filter by your vehicle's make, model and engine variant to ensure you receive a part with the correct number of splines and the right dimensions.
What is the difference between the inner and outer CV joint on an Audi Q5?
The outer CV joint sits closest to the wheel and accommodates the car's steering angles. The inner CV joint sits closest to the gearbox and absorbs in-and-out axial movement as the suspension travels.
Can I replace just the boot on my Audi Q5?
Yes, if you catch the damage early and the joint is still well-lubricated and free from dirt and grit, replacing just the CV boot may be sufficient. However, if noises are already audible, the entire constant velocity joint must be replaced.
Why does my Audi Q5 vibrate at higher speeds?
At higher speeds, vibrations are often linked to the propeller shaft or its centre bearing, especially on Quattro models. It can also stem from an imbalance in a drive shaft if it has suffered mechanical damage.
Is the propeller shaft different on Quattro models?
Yes, Quattro models feature a central propeller shaft that transmits power to the rear wheels. This prop shaft is a critical component that requires precise balancing to prevent unwanted noises and vibrations.
How quickly do you deliver drivetrain components for the Audi Q5?
We are a Swedish driveline specialist with our own warehouse, which means we normally dispatch your parts on the same day or the day after ordering for the fastest possible delivery across the EU.