BMW 1

Welcome to CVJoint24, the international shop of a Swedish driveline specialist offering premium drivetrain parts for the BMW 1. We stock an extensive range of components engineered to...

Choose version

Choose a version to refine the results and get closer to the right product.

Products for BMW 1

294 products
241 - 264 of 294
Item no.:515892
  • Position: Rear right
  • Splines wheel side: 27
  • Total length: 664 mm
  • Joint diameter: 86 mm
  • ABS teeth: 48
Item no.:512462
  • Position: Rear right
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 793 mm
  • Joint diameter: 90 mm
Item no.:0937028
  • Inner diameter: 43 mm
  • Outer diameter: 90 mm
Item no.:698893
  • Position: Rear
Item no.:698323
  • Position: Rear
Item no.:645831
  • Position: Rear, Inner
  • Inner splines: 30
  • Splines gearbox side: 27
  • Total length: 175 mm
Item no.:459878
  • Position: Rear, Outer
  • Inner splines: 28
  • Splines wheel side: 30
  • Total length: 133 mm
Item no.:451383
  • Position: Rear, Outer
  • Splines wheel side: 28
  • Seal diameter: 57 mm
  • Outer splines: 28
  • Splines gearbox side: 25
Item no.:415725
  • Position: Rear left
  • Splines wheel side: 27
  • Total length: 612 mm
  • Joint diameter: 86 mm
  • ABS teeth: 48
Item no.:518540
  • Position: Rear right
  • Splines wheel side: 27
  • Total length: 668 mm
  • Joint diameter: 88 mm
  • ABS teeth: 48
Item no.:411037
  • Position: Rear left
  • Splines wheel side: 27
  • Total length: 614 mm
  • Joint diameter: 94 mm
  • ABS teeth: 48
Item no.:411503
  • Position: Rear left
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 739 mm
  • Joint diameter: 90 mm
Item no.:510285
  • Position: Rear right
  • Splines wheel side: 27
  • Total length: 664 mm
  • Joint diameter: 86 mm
  • ABS teeth: 48
Item no.:513492
  • Position: Rear right
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 793 mm
  • Joint diameter: 90 mm
Item no.:697005
  • Position: Rear
Item no.:696263
  • Position: Rear
Item no.:412738
  • Position: Rear left
  • Splines wheel side: 27
  • Total length: 612 mm
  • Joint diameter: 86 mm
  • ABS teeth: 48
Item no.:414345
  • Splines wheel side: 27
  • Total length: 611 mm
  • Joint diameter, gearbox side: 100 mm
  • Seal ring diameter: 69 mm
Item no.:411728
  • Position: Rear left
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 739 mm
  • Joint diameter: 90 mm
Item no.:519556
  • Position: Rear right
  • Splines wheel side: 27
  • Total length: 664 mm
  • Joint diameter: 86 mm
  • ABS teeth: 48
Showing 241–264 of 294 products

Drivetrain for BMW 1

Maintaining the drivetrain on a BMW 1 is essential to preserving the dynamic driving experience for which the brand is renowned. As driveline specialists, we understand that every component, from the smallest circlip to the complete drive shaft, plays a critical role in how power reaches the road. With an extensive range for the BMW 1, we cater to everything from early generations to the very latest variants. Our focus is on offering parts that not only fit physically, but also meet the demanding torque and precision requirements BMW drivers expect. By choosing the right components, you extend your car's service life and ensure safety systems like ABS and traction control operate seamlessly.

The drivetrain in a BMW 1 is subjected to heavy loads, especially during spirited driving or under demanding European winter conditions. Road salt, moisture and temperature swings take their toll on CV boots and bearings, making regular inspections and prompt repairs vital. Here you will find everything you need to carry out a professional repair. We are the international shop of a Swedish driveline specialist shipping across the EU from our Helsingborg warehouse, offering both breadth and depth in stock so you rarely have to wait for the parts you need to get your car back on the road in top condition.

How the drivetrain is engineered on the BMW 1

Over the years, the BMW 1 has used different drivetrain layouts, meaning owners must pay close attention when selecting replacement parts. Traditionally, the BMW 1 is famous for its rear-wheel-drive architecture, where a longitudinally mounted engine sends power rearwards via a propeller shaft to a differential, and onwards to the wheels via drive shafts. This layout delivers the balanced weight distribution BMW is celebrated for, but it also introduces more drivetrain components that require maintenance, such as centre bearings and universal joints along the prop shaft. Newer generations of the BMW 1 have shifted to a front-wheel-drive platform, fundamentally altering the drivetrain layout with transverse engines and a more compact integration between driveshafts and the gearbox.

For models equipped with xDrive, BMW's intelligent all-wheel-drive system, the setup is even more sophisticated. This arrangement features both front and rear drive shafts, alongside a transfer box that splits torque between the axles. Whatever configuration your BMW 1 uses, it is crucial to realise that components are engineered around the car's specific engine and gearbox combination. For instance, a high-torque diesel engine places vastly different demands on drive shaft strength than an entry-level petrol unit. At CVJoint24, we have mapped these variations thoroughly to supply the exact match for every version of the BMW 1.

Common faults and symptoms

Several telltale signs indicate that a drivetrain component on your BMW 1 is starting to fail. One of the most frequent symptoms is a clicking or knocking noise when turning on full lock at low speeds. This almost invariably points to a worn outer CV joint, frequently caused by a split CV boot that has allowed grease to escape and dirt to enter. If you instead notice vibrations throughout the car under acceleration, an inner CV joint is often the culprit. Inner constant velocity joints wear differently and tend to cause an imbalance that is most noticeable when the engine is under load.

On rear-wheel-drive and all-wheel-drive BMW 1 models, the propeller shaft is another potential source of trouble. A whining noise or vibrations originating from underneath the centre of the car often points to a worn centre bearing. A failing centre bearing can ultimately damage the prop shaft itself if ignored. Furthermore, keep an eye out for corroded or cracked ABS rings, which commonly trigger an ABS warning light or cause the system to pulse unnecessarily under braking. By spotting these signs early, you can avoid more costly consequential damage to your BMW.

Common parts to replace on the BMW 1

Depending on mileage and usage, certain components require replacement more often than others. In our BMW 1 range, complete drive shafts remain in high demand, as fitting an entire assembly is often far more time-efficient than overhauling individual joints. We stock a comprehensive selection of drive shafts for this model series, reflecting the broad variation across different engines and production years. Individual CV joints are also widely sought after, with multiple inner and outer options available to suit your exact setup.

Here are our most popular categories for the BMW 1:

  • Drive shaft BMW 1 – Complete assemblies for rapid fitting and dependable performance.
  • Outer CV joint BMW 1 – To cure clicking noises during cornering.
  • Inner CV joint BMW 1 – The solution for shudder and vibrations under acceleration.
  • Propeller shaft BMW 1 – For rear-wheel-drive and xDrive variants.
  • Centre bearing BMW 1 – Essential for eliminating prop shaft noise and vibration.

Alongside these primary parts, replacing CV boots and ABS reluctor rings is also standard maintenance. An intact boot is the most cost-effective insurance for prolonged CV joint life, while a new ABS ring often resolves frustrating dashboard warnings without having to replace the entire driveshaft.

How to find the right part for your BMW 1

Select the relevant subcategory for your BMW 1:

With multiple potential drivetrain issues on a vehicle, starting in the right category saves time. By comparing the exact component sections for the BMW 1, it becomes simple to distinguish between drive shaft, CV joint or propeller shaft problems and head straight to the page that matches your symptoms and fitment.

Choosing the correct part for a BMW 1 can be tricky due to numerous technical revisions and varying drivetrain layouts across production runs. Spline counts, shaft lengths and flange designs can differ even between cars built in the same model year. Selecting your car's exact make, model and engine variant in our shop filter is the most dependable way to pinpoint compatible parts and avoid ordering errors.

When searching for parts, it is also useful to know whether your vehicle has a manual or automatic gearbox, and whether it features all-wheel drive (xDrive). These specifications directly influence the dimensions of both drive shafts and prop shafts. If you are ever unsure about a technical detail, such as the tooth count on an ABS ring or total driveshaft length, our customer service team is on hand to help. We are here to make sure you get the right component first time so your repair proceeds smoothly.

Why buy from CVJoint24

CVJoint24 is no ordinary parts retailer; we are a dedicated specialist focusing strictly on drivetrains and power transmission. For a BMW 1 owner, this provides access to in-depth technical knowledge that general motor factors rarely possess. We understand the fine engineering details of your car and stock parts built to stringent quality standards. As a Swedish driveline specialist shipping across Europe, we supply hard-wearing components at competitive prices, providing the durability demanded by high-stress drivetrain systems.

Ordering from us also means prompt dispatch from our warehouse in Helsingborg, Sweden, directly across the EU. We understand that a vehicle stuck in the garage costs time and convenience, which is why we prioritise fast shipping. With our straightforward returns process, you can order with absolute confidence. Choose CVJoint24 for your BMW 1 – your dependable partner for drivetrain reliability, whether you need a replacement drive shaft, centre bearing or CV joint.

Frequently Asked Questions about Drivetrain Parts for BMW 1

How do I know if my BMW 1 needs a new drive shaft?

The most common symptoms are vibrations during acceleration or clicking noises when cornering. If you notice a split CV boot and grease has leaked out, there is a high risk that the drive shaft or CV joint has been damaged and requires replacement.

What is the difference between the inner and outer CV joint on a BMW 1?

The outer CV joint sits closest to the wheel and accommodates steering angles; it usually wears out first and causes clicking noises. The inner CV joint sits closest to the gearbox or differential and accommodates changes in shaft length; wear here typically causes vibrations.

Can I replace just the CV boot on my BMW 1?

Yes, if you catch the damage early before dirt and grit have entered the joint, replacing the CV boot and repacking it with fresh grease may be sufficient. It is a very cost-effective preventative measure.

Why does my BMW 1 vibrate under acceleration?

Vibrations during acceleration are often caused by play or wear in the inner CV joints. On rear-wheel-drive models, it can also stem from a worn centre bearing or issues with the propeller shaft universal joints.

Do all propeller shafts fit every BMW 1 model?

No, the propeller shaft varies depending on the wheelbase, gearbox type and whether the car is rear-wheel drive or xDrive. Always select your vehicle's exact make, model and engine to find the correct prop shaft for your specific car.

How does the fitment guarantee work at CVJoint24?

When you select your vehicle's make, model and engine and choose a part recommended for your car, we guarantee that the part fits. In the unlikely event that it does not fit, we will help you find the correct part or arrange a hassle-free return.