BMW 3

Welcome to CVJoint24, your Swedish specialist in drivetrains for the BMW 3. We understand that your vehicle demands components engineered to exact tolerances to retain its renowned...

Choose version

Choose a version to refine the results and get closer to the right product.

Products for BMW 3

363 products
121 - 144 of 363
Item no.:690238
  • Position: Rear
Item no.:0603469
  • Position: Front
Item no.:0620939
  • Position: Rear
Item no.:647058
  • Position: Rear, Inner
  • Inner splines: 24
  • Joint diameter: 92 mm
  • Thread size: M24X1,5
Item no.:694881
  • Position: Rear
Item no.:411374
  • Splines wheel side: 27
  • Total length: 612 mm
  • Joint diameter, gearbox side: 94 mm
  • Thread size: M24x1.5
Item no.:517072
  • Splines wheel side: 27
  • Total length: 665 mm
  • Joint diameter, gearbox side: 94 mm
  • Thread size: M24x1.5
Item no.:514892
  • Position: Rear right
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 800 mm
Item no.:643151
  • Position: Rear, Inner
  • Inner splines: 24
  • Total length: 24 mm
  • Thread size: M24X1,5
Item no.:645634
  • Position: Rear, Inner
  • Inner splines: 24
  • Splines gearbox side: 27
  • Total length: 142 mm
  • ABS teeth: 24
Item no.:147591
  • Position: Front left, Inner
  • Inner splines: 24
  • Seal diameter: 44 mm
  • Total length: 184 mm
  • Joint diameter: 82 mm
Item no.:141675
  • Position: Front left, Inner
  • Inner splines: 24
  • Splines gearbox side: 27
  • Total length: 483 mm
Item no.:648654
  • Position: Rear, Inner
  • Inner splines: 30
  • Splines gearbox side: 27
  • Total length: 175 mm
Item no.:248474
  • Position: Front right, Inner
  • Inner splines: 24
  • Seal diameter: 44 mm
  • Total length: 500 mm
  • Outer splines: 27
Item no.:657894
  • Position: Rear, Outer
  • Inner splines: 24
  • Seal diameter: 69 mm
  • Outer splines: 27
  • ABS teeth: 48
Item no.:350312
  • Position: Front, Outer
  • Inner splines: 33
  • Seal diameter: 64,8 mm
  • Outer splines: 30
  • ABS teeth: 48
Item no.:451518
  • Position: Rear, Outer
  • Inner splines: 28
  • Splines wheel side: 30
  • Total length: 133 mm
Item no.:459537
  • Position: Rear, Outer
  • Splines wheel side: 28
  • Seal diameter: 57 mm
  • Outer splines: 28
  • Splines gearbox side: 25
Item no.:456293
  • Position: Rear, Outer
  • Inner splines: 28
  • Splines wheel side: 30
  • Total length: 135 mm
Item no.:627240
  • Position: Rear
  • Total length: 1,540 mm
Item no.:621101
  • Position: Rear
  • Total length: 1,548 mm
  • Outer diameter 1: 14 mm
  • Bolt circle diameter 1: 96 mm
  • Outer diameter 2: 16 mm
Item no.:619081
  • Position: Rear
  • Splines wheel side: 27
  • Total length: 575 mm
  • Joint diameter: 86 mm
  • Joint diameter, gearbox side: 100 mm
Showing 121–144 of 363 products

Drivetrain for BMW 3

The drivetrain in a BMW 3 is the very heart of the car's dynamic handling. As one of the world's most appreciated models among driving enthusiasts, the BMW 3 places exceptionally high demands on delivering power without loss or vibration. At CVJoint24, you will find an extensive range of parts carefully selected to match or exceed original specifications. We are specialists in BMW and understand that every component, from the smallest CV boot to a complete propeller shaft, plays a decisive role in the overall driving experience. Servicing the drivetrain promptly helps you avoid costly consequential damage to the gearbox and differential, whilst preserving the sharp, precise steering feel typical of the model.

Our focus is on providing parts that guarantee an exact fit and long service life. Because the BMW 3 is available in many different configurations, from economical diesels to high-performance petrol engines, drivetrain component requirements vary considerably. We possess deep technical knowledge of these variations to help you select the correct part. With our fitment guarantee, you can be sure the items you order will fit your specific vehicle, saving both time and hassle during installation.

How the drivetrain is engineered on the BMW 3

The drivetrain layout on a BMW 3 is a masterpiece of engineering, prioritising balanced weight distribution and efficient power delivery. Traditionally rear-wheel drive, the model sends power from the engine through the gearbox to a propeller shaft running down the centre of the car. This prop shaft is typically split into two sections supported by a centre bearing that damps out vibrations. At the rear axle, power is distributed through a differential to the wheels via two drive shafts. For models equipped with xDrive, BMW's all-wheel drive system, a transfer box and an additional front propeller shaft are added, along with driveshafts to the front wheels.

Every part in this assembly is calibrated to handle specific torque levels. A drive shaft for the BMW 3 is engineered to withstand both heavy acceleration and the angles created by suspension movement. The CV joints, both inner and outer, are packed with specialised grease and sealed with CV boots to minimise friction and wear. On all-wheel-drive variants, the front drive shafts are under particular strain due to the severe articulation angles encountered when turning at full lock under power. Understanding this complex layout is key to pinpointing exactly where any issue originates.

Common faults and symptoms

There are several clear warning signs when a component in your BMW 3 drivetrain starts to fail. One of the most frequent symptoms is a clicking or knocking noise heard when making sharp turns at low speeds. This typically points to a worn outer CV joint, frequently caused by a split CV boot that has allowed dirt and moisture inside. If you instead experience shuddering or vibrations throughout the cabin during acceleration, an inner CV joint may have developed excess play, or a drive shaft might be out of balance.

Vibrations felt through the chassis that change with vehicle speed rather than engine revs can often be traced to the propeller shaft. A common fault is a worn BMW 3 centre bearing where the internal bearing has dried out or its rubber surround has perished and cracked, allowing the prop shaft to run off-centre. This can cause a whining or thumping noise from underneath the car. It is vital to respond quickly to these warning signs, as propeller shaft imbalance can cause irreversible damage to the gearbox output shaft or the differential pinion bearings. By catching these issues early, you can resolve the problem before it leads to a breakdown on the road.

Common parts to replace on the BMW 3

Depending on driving style and mileage, certain components require replacement more frequently on a BMW 3. Our stock is optimised to supply these parts with high availability. Here are the most frequently requested categories for this model:

  • Drive shafts: With multiple options available, we cover virtually all engine types and model years. Fitting a complete drive shaft is often the most cost-effective solution when significant wear occurs.
  • CV joints: We offer both outer and inner constant velocity joints. Replacing just the CV joint is a sensible route if the shaft itself remains undamaged.
  • Propeller shafts and centre bearings: With our extensive selection of propeller shafts and centre bearings, we can cure most vibration issues related to the longitudinal driveline.

Beyond these major components, CV boots and ABS reluctor rings are essential service items that often require attention. A torn boot is the single biggest cause of premature CV joint failure. Replacing the CV boot as soon as a split appears will save you significant repair costs later on. We also recommend inspecting the condition of the propshaft coupling (guibo), the rubber flex disc between the gearbox and the propeller shaft, as it tends to degrade alongside centre bearings and joints.

How to find the correct part for your BMW 3

Browse directly to the relevant subcategory for your BMW 3:

When dealing with multiple potential driveline symptoms, it is best to start in the dedicated category straight away. Reviewing the exact component categories for the BMW 3 makes it easier to distinguish between drive shaft, CV joint or propeller shaft issues and navigate to the page that best matches your symptoms and vehicle fitment.

If you are unsure about any specification—such as whether your BMW 3 propeller shaft features one or two universal joints—do not hesitate to contact our customer support team. We have access to detailed parts catalogues and can help verify suitability using your car's chassis number (VIN). Measuring your original part before ordering is also a reliable way to ensure a seamless fit, particularly regarding spline counts and overall compressed length.

Why shop with CVJoint24

Choosing CVJoint24 means relying on a Swedish driveline specialist dedicated to drivetrain and power delivery components. We are not a general auto parts store selling everything from air fresheners to tyres; we focus entirely on our core expertise. As a result, we offer technical knowledge and a depth of stock that few general retailers can match. For your BMW 3, this means receiving parts thoroughly evaluated and approved to cope with the rigorous performance demands of the vehicle.

We deliver the correct components every time through meticulous quality control and close partnerships with leading manufacturers. Our fitment guarantee eliminates the guesswork from online shopping: when you choose your part using our vehicle model and engine selector, we ensure it fits. What is more, we know your vehicle should not spend any longer on axle stands than strictly necessary. That is why we ship promptly from our central warehouse, helping you get back on the road without delay. Find the right part first time and experience the difference of a genuine driveline specialist.

Frequently Asked Questions about Drivetrains for BMW 3

How do I know if my BMW 3 needs a new drive shaft?

The most common signs are vibrations under acceleration or unusual noises when driving. If you notice a split CV boot and grease has leaked out, there is a high risk that the drive shaft or joint needs replacing.

Do all drive shafts fit every BMW 3 model?

No, specifications differ depending on the engine, gearbox and whether the car is rear-wheel drive or equipped with xDrive. Always select your make, model and engine to find the correct part.

What is the difference between an inner and outer CV joint?

The outer CV joint is located closest to the wheel and accommodates steering angles. The inner joint sits nearest the gearbox or differential and primarily absorbs vertical suspension movements.

Can I replace only the centre bearing on my propeller shaft?

Yes, on many BMW 3 models it is possible to replace just the centre bearing. However, this requires the prop shaft to be removed and sometimes split, which demands precision to maintain balance.

What does the fitment guarantee at CVJoint24 mean?

It means that if you choose your car's correct make, model and engine and order the part we recommend, we guarantee it will fit. In the unlikely event that it does not fit, we will arrange a replacement free of charge.

How quickly are parts delivered for my BMW 3?

We dispatch quickly from our central warehouse for in-stock items ordered on working days. We always strive to keep your car's downtime to a minimum.

Why does my car still vibrate after replacing the drive shafts?

If vibrations persist, the issue may lie with the propeller shaft, centre bearing or propshaft coupling (guibo). It is also essential to ensure that the new drive shafts are installed correctly and that no other suspension components are worn.