Drive shafts for BMW 3 Serie

Browse our range of drive shafts for the BMW 3 Serie, tailored for both rear-wheel-drive and four-wheel-drive variants. Our selection covers multiple body styles including saloon,...

Choose version

Choose a version to refine the results and get closer to the right product.

Products for Drive shafts for BMW 3 Serie

1,143 products
817 - 840 of 1143
Item no.:1108022
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 564 mm
  • ABS teeth: 48
Item no.:418084
  • Position: Rear left
  • Splines wheel side: 30
  • Total length: 635 mm
  • Joint diameter, gearbox side: 102 mm
  • Seal ring diameter: 60 mm
Item no.:1169777
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 555 mm
Item no.:2143855
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 855 mm
Item no.:1141551
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 31
  • Total length: 550 mm
  • Joint diameter: 86 mm
Item no.:2109313
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 31
  • Total length: 841 mm
  • Joint diameter: 86 mm
Item no.:4162673
  • Position: Rear left
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 739 mm
  • Joint diameter: 90 mm
Item no.:5136795
  • Position: Rear right
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 793 mm
  • Joint diameter: 90 mm
Item no.:1186013
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 557 mm
Item no.:2106824
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 857 mm
Item no.:4162222
  • Position: Rear left
  • Splines wheel side: 30
  • Total length: 617 mm
  • Joint diameter: 88 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:6172172
  • Position: Rear
  • Splines wheel side: 30
  • Total length: 680 mm
  • Joint diameter: 88 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:6135489
  • Position: Rear
  • Splines wheel side: 27
  • Total length: 614 mm
  • Joint diameter: 94 mm
  • ABS teeth: 48
Item no.:5161321
  • Position: Rear right
  • Splines wheel side: 27
  • Total length: 668 mm
  • Joint diameter: 88 mm
  • ABS teeth: 48
Item no.:1105138
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 571 mm
  • ABS teeth: 48
Item no.:2125765
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 892 mm
  • ABS teeth: 48
Item no.:7302517
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 890 mm
  • ABS teeth: 49
Item no.:616002
  • Position: Rear
  • Splines wheel side: 27
  • Total length: 574 mm
  • Joint diameter: 86 mm
  • ABS teeth: 48
Item no.:617681
  • Position: Rear
  • Splines wheel side: 27
  • Total length: 575 mm
  • Joint diameter: 86 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:419793
  • Position: Rear left
  • Splines wheel side: 27
  • Total length: 612 mm
  • Joint diameter: 86 mm
  • ABS teeth: 48
Item no.:5155987
  • Position: Rear right
  • Splines wheel side: 27
  • Total length: 664 mm
  • Joint diameter: 86 mm
  • ABS teeth: 48
Item no.:7316178
  • Position: Rear
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 748 mm
  • Joint diameter: 77 mm
Item no.:6165439
  • Position: Rear
  • Splines wheel side: 30
  • Total length: 651 mm
  • Joint diameter: 94 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:1198863
  • Position: Rear left
  • Splines wheel side: 30
  • Total length: 598 mm
  • Joint diameter: 94 mm
  • Joint diameter, gearbox side: 108 mm
Showing 817–840 of 1143 products

Drive shafts for BMW 3 Serie

The BMW 3 Serie is renowned for its dynamic driving feel and precise handling, qualities that place high demands on every component in the drivetrain. The drive shaft is a critical link in this system, responsible for transferring torque from the gearbox or differential directly to the wheels. With a wide range of available options, we cover everything from classic generations to the very latest models. Choosing the right part is fundamental to maintaining the balance and power that define a BMW. A faulty or worn drive shaft can quickly degrade the driving experience and, in the worst case, lead to costly consequential damage to other areas of the vehicle.

Our range is carefully selected to meet the specific technical requirements of the BMW 3 Serie. We understand that every engine option and chassis setup requires its own unique solution. That is why we work exclusively with components that meet the highest standards in material choice and manufacturing tolerances. Whether your car is used for daily commuting or spirited driving, you can rely on our drive shafts to deliver the durability and performance needed to handle the forces generated in a modern drivetrain.

What does a drive shaft do on a BMW 3 Serie?

The primary task of the drive shaft is to transfer rotational energy while accommodating suspension movement and, on the front axles of xDrive models, steering angles as well. On a rear-wheel-drive BMW 3 Serie, the drive shafts are fitted at the rear, linked between the differential and the rear wheels. They must be capable of handling substantial torque, particularly in high-torque diesel models or the more powerful petrol variants. The shaft comprises the shaft bar itself and two joints that permit angular changes during driving, which is essential as the wheels travel up and down over road imperfections.

For models equipped with four-wheel drive, there are also front drive shafts that work alongside a Propeller shafts for BMW 3 Serie to distribute power between the axles. This complex configuration requires every part to be perfectly synchronised. The drive shaft acts as a safeguard within the system; it must be strong enough to transmit power, yet engineered to minimise vibration and noise. A properly functioning driveshaft contributes to the smooth, quiet ride expected from a premium car in this class.

Common signs of wear

Wear on a drive shaft typically develops gradually, but the symptoms are usually obvious to the observant driver. One of the most frequent indicators is vibration felt through the body or seat during acceleration. These vibrations often occur because the inner joints have worn or the shaft has become unbalanced. If a CV boot has split, grease can escape, causing the internal components to wear prematurely from dirt and moisture. It is therefore vital to inspect the condition of the boots regularly to prevent total failure.

Another common symptom is a clicking or knocking noise when taking sharp corners at low speeds, which usually points to a worn Outer CV joints for BMW 3 Serie. If you notice the car shaking at specific speeds or unusual noises coming from the underside, the drive shafts should be inspected straight away. Ignoring these warning signs can eventually cause the shaft to shear, leaving the car with no drive at all and risking damage to the suspension and gearbox. Early diagnosis saves money and enhances safety on the road.

How to choose the correct drive shaft

Identifying the correct drive shaft for your BMW 3 Serie requires precision, as there are many technical variations. Factors such as engine choice, gearbox type (manual or automatic), and whether the car has a sports suspension all influence the shaft's length, spline count, and dimensions. The most reliable way to find the correct part is to select your vehicle's make, model, and engine variant in our search tool. This filters our comprehensive inventory so you only see parts that are technically compatible with your exact model and equipment specification.

Always verify whether it is the left or right side that needs replacing, as these often differ in length due to the offset position of the differential. It is also crucial to note whether your car is rear-wheel drive or xDrive, as the front shafts on four-wheel-drive models feature a completely distinct design. By selecting a drive shaft from us, you receive a product matching original equipment specifications, ensuring a trouble-free installation and a long service life. We always recommend double-checking technical details if you are unsure, as a difference of just a few millimetres can be decisive for proper fitment.

Related parts to inspect

Please also check these exact pages for the same vehicle when working on the drive shaft:

When a driveline component shows signs of wear, neighbouring parts on the same car often require inspection as well. Comparing these exact pages for the BMW 3 Serie makes it easier to establish whether the fault lies in the drive shaft itself or in an adjacent section of the power transmission.

This is particularly relevant on models where vibration, play, and noises can transfer symptoms across several parts in the same drivetrain. A quick check of related categories reduces the risk of replacing the correct component type while overlooking an adjacent part that affects the same issue.

By carrying out a comprehensive inspection of these components, you can prevent having to strip down the drivetrain multiple times. Labour often represents the largest cost of a repair, so renewing a worn ABS ring or a questionable CV joint while the shaft is already removed is a sensible and economical strategy.

Why shop with CVJoint24

As a Swedish driveline specialist, we offer in-depth expertise that general car parts retailers often lack. Our comprehensive inventory and focus on precise fitment make us the natural choice for BMW 3 Serie owners. We understand the technical nuances of these vehicles and supply only parts that satisfy our rigorous standards for quality and endurance. With extensive coverage for the 3 Series, we almost always have the right part on the shelf ready for swift delivery across Europe.

We combine the comprehensive inventory of a large store with the focused knowledge of a specialist. When you shop with us, our vehicle selector allows you to filter easily by make, model, and engine, taking the guesswork out of ordering spare parts. Our aim is for you to feel entirely confident that the component you order will fit your car perfectly. Backed by dedicated expertise in automotive power transmission and a commitment to technical precision, CVJoint24 is your trusted partner for keeping your BMW in peak condition year after year.

Frequently Asked Questions about Drive Shafts for BMW 3 Series - High Quality & Perfect Fit

How do I know if my BMW 3 Series needs a new drive shaft?

The most common signs are vibrations through the car under acceleration, clicking noises when turning, or visible grease leaking from the CV boots.

Are drive shafts different between xDrive and rear-wheel-drive models?

Yes, xDrive models have drive shafts both at the front and the rear, whilst rear-wheel-drive models only have rear drive shafts. Front shafts on xDrive models are unique and cannot be interchanged with rear shafts.

Can I replace just the CV joint instead of the entire drive shaft?

Yes, in many cases we supply individual outer and inner CV joints. If the shaft bar itself is straight and undamaged, replacing only the worn constant velocity joint can be a more economical solution.

Why does my BMW 3 Series vibrate under acceleration?

Vibrations during acceleration are frequently caused by wear in the inner CV joint or an imbalance in the drive shaft itself. They can also stem from issues with the propeller shaft or its centre bearing.

Does the same drive shaft fit both saloon and Touring models?

They are often identical if they share the same engine and drivetrain, but there are exceptions depending on chassis type and model year. Always select your car's exact make, model and engine to ensure the correct fit.

What happens if a drive shaft snaps while driving?

If a drive shaft snaps, the vehicle loses drive to that wheel. On a rear-wheel-drive car without a limited-slip differential, this means the car will not move at all even with a gear engaged.