Outer CV joints for Honda Accord

Find the right outer CV joint for your Honda Accord, whether you drive a saloon or coupé model. We supply precision components engineered for front-wheel-drive versions, spanning classic...

Products for Outer CV joints for Honda Accord

22 products
1 - 22 of 22
Item no.:0507770
  • Position: Outer
  • Inner splines: 32
  • Seal diameter: 64 mm
  • Outer splines: 28
  • ABS teeth: 50
Item no.:7308391
  • Position: Outer
  • Inner splines: 32
  • Seal diameter: 60 mm
  • Outer splines: 28
  • ABS teeth: 50
Item no.:658439
  • Position: Rear, Outer
  • Inner splines: 25
  • Splines wheel side: 23
  • Seal diameter: 55 mm
  • Outer diameter: 64 mm
Item no.:0555304
  • Position: Outer
  • Inner splines: 32
  • Splines wheel side: 30
  • Seal diameter: 68 mm
  • Outer splines: 30
Item no.:158528
  • Position: Outer
  • Inner splines: 34
  • Seal diameter: 68 mm
  • Outer splines: 30
  • Thread size: M26X1,5
Item no.:0529418
  • Position: Outer
  • Inner splines: 32
  • Seal diameter: 60 mm
  • Outer splines: 28
  • ABS teeth: 50
Item no.:7310808
  • Position: Outer
  • Inner splines: 32
  • Splines wheel side: 26
  • Seal diameter: 49 mm
  • ABS teeth: 100
Item no.:7310809
  • Position: Outer
  • Inner splines: 32
  • Splines wheel side: 26
  • Seal diameter: 49 mm
  • ABS teeth: 50
Item no.:0580502
  • Position: Outer
  • Inner splines: 34
  • Seal diameter: 63 mm
  • Outer splines: 28
  • Thread size: M24X1,5
Item no.:352194
  • Position: Front, Outer
  • Inner splines: 32
  • Seal diameter: 60 mm
  • Outer splines: 28
  • ABS teeth: 50
Item no.:0530605
  • Position: Outer
  • Inner splines: 32
  • Seal diameter: 49 mm
  • Outer splines: 26
  • Thread size: M22X1,5
Item no.:352756
  • Position: Front, Outer
  • Inner splines: 30
  • Seal diameter: 63 mm
  • Outer splines: 26
  • Joint diameter: 84 mm
Item no.:355981
  • Position: Front, Outer
  • Inner splines: 32
  • Seal diameter: 63 mm
  • Outer splines: 28
  • Thread size: M24X1,5
Item no.:7317991
  • Position: Front, Outer
  • Inner splines: 32
  • Seal diameter: 64 mm
  • Outer splines: 28
  • Thread size: M24X1,5
Item no.:355048
  • Position: Front, Outer
  • Inner splines: 30
  • Seal diameter: 68 mm
  • Outer splines: 30
  • Thread size: M26X1,5
Item no.:0526964
  • Position: Outer
  • Inner splines: 30
  • Seal diameter: 47 mm
  • Outer splines: 24
  • Joint diameter: 82,5 mm
Item no.:7317958
  • Position: Front, Outer
  • Inner splines: 32
  • Seal diameter: 55 mm
  • Outer splines: 26
  • Thread size: M22X1,5
Item no.:350342
  • Position: Front, Outer
  • Inner splines: 32
  • Seal diameter: 55 mm
  • Outer splines: 26
  • ABS teeth: 50
Item no.:651179
  • Position: Rear, Outer
  • Inner splines: 25
  • Splines wheel side: 23
  • Seal diameter: 55 mm
  • Outer diameter: 64 mm
Item no.:151614
  • Position: Outer
  • Inner splines: 34
  • Seal diameter: 68 mm
  • Outer splines: 30
  • Thread size: M26X1,5
Item no.:159079
  • Position: Outer
  • Inner splines: 34
  • Seal diameter: 68 mm
  • Outer splines: 30
  • Thread size: M26X1,5
Item no.:152995
  • Position: Outer
  • Inner splines: 34
  • Seal diameter: 68 mm
  • Outer splines: 30
  • Thread size: M26X1,5

Outer CV joints for Honda Accord

The Honda Accord is renowned for its precision and enduring reliability, yet even the most well-built car requires regular drivetrain maintenance. The outer CV joint is one of the most heavily stressed components, having to handle both power transmission and substantial steering angles at the same time. At CVJoint24, you will find a carefully selected range of outer CV joints tailored specifically for the Honda Accord. We focus on providing parts that match or exceed original equipment standards, ensuring your car remains dependable for many kilometres to come. Selecting the correct component is vital to maintaining the distinctive driving feel that defines a Honda.

What does the outer CV joint do on a Honda Accord?

The primary function of the outer CV joint is to transmit rotational drive from the gearbox, via the drive shaft, out to the front wheels. What makes the outer joint unique compared to the inner joint is its ability to operate at wide articulation angles, which are required whenever you turn the steering wheel to guide your Honda Accord. This component is a constant velocity joint, meaning it transfers power smoothly regardless of the operating angle. To ensure optimal performance, the joint is packed with specialised grease and sealed by a flexible rubber CV boot. If the boot tears or splits, the precision bearings are exposed to road grit and moisture, quickly causing severe wear and requiring replacement.

Common signs of wear

There are several distinct warning signs indicating it is time to inspect the CV joints on your Honda Accord. The most common symptom is a rhythmic clicking or knocking noise heard when making sharp turns at low speeds, such as during a parking manoeuvre. If the noise disappears while driving in a straight line and returns as soon as you turn the wheel, the outer CV joint is almost certainly the culprit. Other symptoms include vibrations through the steering wheel under acceleration or noticeable grease splatters on the inside of the wheel rim, indicating a split CV boot. Ignoring these warnings can ultimately lead to joint seizure or complete mechanical failure, leaving your vehicle stranded.

How to choose the correct outer CV joint

To find the correct part among our selection for the Honda Accord, it is essential to review the specifications carefully. Over the years, Honda has fitted various CV joint configurations depending on engine capacity, gearbox type and whether the vehicle is equipped with an ABS system. The most reliable way to select the right part is to filter by your car's make, model and engine. Once the suitable options are displayed, you should still verify the spline tooth counts on both the shaft and hub sides, as well as whether the joint is supplied with an ABS ring for Honda Accord. Cross-checking these technical details with your existing component ensures that fitment proceeds smoothly without any surprises.

Related parts to inspect

Feel free to inspect these exact pages for the same vehicle when working on the outer CV joint:

When one drivetrain component shows signs of wear, related parts on the vehicle often require attention too. Checking these specific pages for the Honda Accord makes it straightforward to determine whether the issue lies strictly with the outer CV joint or another interconnected section of the power transmission.

This is particularly relevant on models where vibrations, play and unusual noises can shift symptoms across several parts within the same drivetrain. A quick check of related categories reduces the risk of replacing one correct part while overlooking an adjacent component that contributes to the very same problem.

By carrying out a thorough assessment of your drivetrain's overall condition, you ensure that your Honda Accord continues to run quietly and smoothly for thousands of trouble-free kilometres.

Why shop at CVJoint24?

CVJoint24 is not just another generic parts retailer; we are an international shop operated by a Swedish driveline specialist, dispatching orders across the EU from our warehouse in Helsingborg, Sweden. Our strength lies in our comprehensive category knowledge and our dedication to supplying the exact component your car requires. For Honda Accord owners, this guarantees access to high-precision parts built to endure demanding European road conditions. We offer a seamless buying experience by letting you easily filter by make, model and engine, eliminating all guesswork. With tailored items for your vehicle and technical support that genuinely understands power transmission systems, we are the ideal choice when you demand quality and expertise together.

Frequently asked questions about outer CV joints for Honda Accord

How do I know if the noise on my Honda Accord is coming from the outer CV joint?

If you hear a clicking noise during sharp cornering, but the noise stops when driving in a straight line, it is almost always the outer CV joint that is worn.

Are the CV boot and grease included when I buy an outer CV joint from you?

Yes, our outer CV joints for Honda Accord are supplied as complete kits including CV boot, grease, clips and usually a new hub nut as well.

Can I replace just the CV joint, or do I have to replace the complete drive shaft?

On most Honda Accord models, you can easily replace just the outer CV joint, which is a much more economical option than replacing the complete drive shaft.

Why is it important to count the splines on the CV joint?

Splines are the teeth that lock the joint to the shaft and the hub. As Honda uses different designs depending on the engine and model year, matching the tooth count is essential to ensure the part fits.

What happens if I drive with a split CV boot?

If the boot is split or torn, the grease leaks out and dirt gets in. This causes the CV joint to wear out very quickly, which can lead to complete failure where the car loses all drive.

Do I need a CV joint with an ABS ring for my Honda Accord?

That depends on your car's exact specification. If your car has ABS and the sensor reads from a ring mounted directly on the CV joint, your new joint must have a matching ABS ring fitted.