Porsche

Spare parts and drivetrain components for Porsche.

Choose model

Choose a model to move to more precise products and the next step in the vehicle tree.

Products for Porsche

170 products
1 - 24 of 170
Item no.:0231297
  • Height: 30 mm
  • Bearing thickness: 68 mm
Item no.:3109716
  • Position: Front left, Front right
  • Flange diameter: 123 mm
  • Total length: 497 mm
  • Splines wheel side: 42
Item no.:414952
  • Position: Rear
  • Total length: 795 mm
  • Splines gearbox side: 42
  • Splines wheel side: 32
Item no.:0235624
  • Number of centre bearings: 1
  • Number of joints: 2
  • Total length: 1,246 mm
Item no.:415147
  • Position: Rear
  • Total length: 530 mm
  • Splines wheel side: 28
Item no.:0468248
  • Position: Inner
  • Inner splines: 24
Item no.:0512026
  • Position: Outer
  • Seal diameter: 76,5 mm
  • Inner splines: 25
  • Outer splines: 42
Item no.:415628
  • Position: Rear left
  • Total length: 781 mm
  • Splines gearbox side: 32
Item no.:0273607
  • Number of centre bearings: 1
  • Number of joints: 3
  • Total length: 1,449 mm
Item no.:0690795
  • Position: Front
  • Diameter: 76 mm
  • Height: 120 mm
  • Outer diameter: 22 mm
Item no.:111075
  • Position: Front
  • Total length: 505 mm
  • Splines wheel side: 42
Item no.:0850531
  • Inner diameter: 35 mm
  • Width: 14 mm
Item no.:0514751
  • Position: Outer
  • Seal diameter: 64 mm
  • Inner splines: 28
  • Outer splines: 30
Item no.:0487408
  • Position: Inner
Item no.:0691694
Item no.:6187312
  • Position: Rear left, Rear right
  • Flange diameter: 100 mm
  • Total length: 540 mm
  • Splines wheel side: 100
Item no.:6115741
  • Position: Rear left, Rear right
  • Flange diameter: 100 mm
  • Total length: 411 mm
  • Splines wheel side: 100
Item no.:0453431
  • Position: Inner
Item no.:358723
  • Position: Front, Outer
  • Inner splines: 28
  • Outer diameter: 94 mm
  • Splines wheel side: 42
Item no.:0496691
  • Position: Inner
  • Inner splines: 28
  • Joint diameter: 112 mm
Item no.:3192085
  • Position: Front left, Front right
  • Flange diameter: 112 mm
  • Total length: 525 mm
  • Splines wheel side: 30
Item no.:0530045
  • Position: Outer
  • Seal diameter: 64 mm
  • Inner splines: 27
  • Outer splines: 30
  • Joint diameter: 100 mm
Item no.:0225459
  • Number of centre bearings: 1
  • Number of joints: 2
  • Total length: 632 mm
Item no.:0521028
  • Position: Outer
  • ABS teeth: 48
  • Seal diameter: 56 mm
  • Inner splines: 18
  • Outer splines: 28
Showing 1–24 of 170 products

Drivetrain for Porsche

Porsche is synonymous with precision engineering, which places exceptionally high demands on every drivetrain component. Power transmission lies at the heart of the driving experience, and maintaining components such as drive shafts and constant velocity joints is essential for both safety and performance. We stock a carefully chosen range covering everything from modern performance sports cars to classic icons. We provide specialist solutions for Porsche outer CV joints and inner variants tailored to the stringent requirements of these vehicles. Choosing the correct car parts ensures that torque is transferred efficiently from the gearbox to the wheels without power loss or unwanted vibration. As drivetrain specialists, we ensure that our parts meet the high standard your Porsche deserves.

How the drivetrain differs across Porsche models

Drivetrain architecture varies considerably across the Porsche range. A Porsche 911 often features a sophisticated rear-wheel drive or all-wheel drive layout where lightweight, compact components are prioritised to preserve vehicle balance. In contrast, SUVs like the Porsche Cayenne employ a sturdier setup with heavy-duty propeller shafts and reinforced driveshafts built to handle substantial weight and off-road driving. Mid-engine models such as the Porsche 718 Cayman feature drive shaft angles and lengths optimised around a centralised centre of gravity. Understanding these nuances is key to selecting the right spare parts, as a part intended for a Panamera will rarely fit a Boxster despite visual similarities. We help you find your way through these technical details.

Common faults and symptoms

Wear in the drivetrain often presents through distinct warning signs that should never be ignored. One of the most typical symptoms of a failing inner CV joint on a Porsche is vibration felt under acceleration, frequently caused by degraded grease inside the joint or contamination entering via a split CV boot. A sharp clicking noise on full steering lock typically points to an outer CV joint that requires replacement. On all-wheel-drive models, imbalance in the prop shaft can produce a low droning noise in the cabin. Addressing these signs promptly helps prevent consequential damage to the gearbox or wheel bearings, which can prove far more costly in the long run. Regular inspection of the drive shaft boots remains the most reliable preventative measure.

Popular Porsche models to explore

Continue to the relevant model or component category for Porsche:

On a wide make-level page, finding the exact combination of model and component category quickly is essential. Selecting one of the featured model or category links for Porsche provides the most straightforward path to precise fitment and relevant parts.

Selecting your specific model ensures you see parts that are technically verified for your vehicle's unique configuration and drivetrain.

How to find the right part for your Porsche

Identifying the correct spare part for a Porsche can be intricate owing to frequent technical revisions and optional factory specifications. The most dependable method is to select your exact make, model and engine variant in our vehicle selector. This filters for parts matching your chassis configuration and engine output. We also suggest verifying the physical dimensions or spline count on your original component if several options exist for your model year. Our database is built to deliver exceptional accuracy, whether you are sourcing a complete drive shaft or a dedicated CV boot kit. If you need any assistance, our technical experts are on hand to guide you to the exact part you need.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, dispatching orders across Europe from our central warehouse in Helsingborg, Sweden. We unite in-depth technical knowledge with a range of Porsche drivetrain parts that few general suppliers can match in breadth and depth. By focusing entirely on drivetrain components, we offer specialised expertise that generic car parts retailers often lack. Our accurate filtering by vehicle make, model and engine minimises the risk of ordering the wrong part, and our products are selected to satisfy demanding requirements for durability and fitment. Buying from us means obtaining a precision-matched component tailored to your vehicle's performance, backed by dedicated driveline specialists.

Frequently asked questions about Porsche drivetrains – Driveline spare parts

How do I know if my Porsche needs a new drive shaft?

Common symptoms include vibrations under acceleration, clicking noises when cornering, or visible grease leaking from the CV boots.

How do I find parts that fit my Porsche correctly?

Simply select your Porsche's make, model, and engine variant on CVJoint24. This is the most reliable way to find parts with guaranteed fitment for your specific vehicle.

What is the difference between an inner and outer CV joint on a Porsche?

The outer CV joint sits closest to the wheel and typically causes clicking noises when cornering, whilst the inner CV joint sits closest to the gearbox and usually causes vibrations under acceleration.

Do you sell complete drive shafts for the Porsche Cayenne?

Yes, we stock a wide range of complete drive shafts for the Porsche Cayenne, suited for both front and rear axles depending on the model year.

Why is it important to replace a damaged CV boot immediately?

A split CV boot allows lubricating grease to escape and dirt to enter, which quickly ruins the constant velocity joint and results in far costlier repairs.

Do parts from a Porsche 911 fit a Boxster?

Usually not. Even though some components may appear similar, the drivetrain is engineered specifically for each model series to optimise weight and balance.