Volvo S80 2.0 T

Spare parts and drivetrain components for Volvo S80 2.0 T. Check fitment by selecting your make, model and engine before ordering.

Products for Volvo S80 2.0 T

61 products
1 - 24 of 61
Item no.:658023
  • Position: Rear, Outer
  • Seal diameter: 56 mm
  • Inner splines: 29
  • Diameter: 56 mm
  • ABS teeth: 88
Item no.:0324723
  • ABS teeth: 48
  • Inner diameter: 72 mm
  • Outer diameter: 81 mm
  • Width: 8,35 mm
Item no.:1134414
  • Position: Front left
  • Total length: 536 mm
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • ABS teeth: 48
Item no.:2127066
  • Position: Front right
  • Total length: 987 mm
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • ABS teeth: 48
Item no.:0555095
  • Position: Outer
  • ABS teeth: 48
  • Seal diameter: 56 mm
  • Inner splines: 27
  • Outer splines: 36
Item no.:2172294
  • Position: Front right
  • Total length: 990 mm
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • ABS teeth: 48
Item no.:638423
  • Position: Rear
Item no.:0618568
  • Inner diameter: 29 mm
  • Total length: 147 mm
Item no.:149550
  • Position: Front left, Inner
  • Seal diameter: 31 mm
  • Inner splines: 26
  • Diameter: 31 mm
  • Splines gearbox side: 26
Item no.:646990
  • Position: Rear, Inner
  • Seal diameter: 35 mm
  • Inner splines: 29
  • Diameter: 35 mm
  • Splines gearbox side: 26
Item no.:142102
  • Position: Front left, Inner
  • Seal diameter: 36 mm
  • Inner splines: 27
  • Diameter: 36 mm
  • Splines gearbox side: 31
Item no.:0550730
  • Position: Outer
  • Seal diameter: 56 mm
  • Inner splines: 28
  • Outer splines: 26
  • Joint diameter: 96 mm
Item no.:0662116
  • Position: Front
  • Diameter: 95 mm
  • Outer diameter: 29 mm
Item no.:0511862
  • Position: Outer
  • ABS teeth: 48
  • Seal diameter: 56 mm
  • Inner splines: 33
  • Outer splines: 36
Item no.:1189249
  • Position: Front left
  • Total length: 540 mm
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • ABS teeth: 48
Item no.:0156318
  • Position: Rear left, Rear right
  • Total length: 763 mm
  • Splines gearbox side: 26
  • Splines wheel side: 36
Item no.:249054
  • Position: Front right, Inner
  • Inner splines: 26
  • Total length: 608 mm
  • Splines gearbox side: 26
Item no.:0555578
  • Position: Outer
  • Seal diameter: 58 mm
  • Inner splines: 28
  • Outer splines: 40
  • Joint diameter: 92 mm
Item no.:2134400
  • Position: Front right
  • Total length: 953 mm
  • Splines gearbox side: 26
  • Splines wheel side: 40
Item no.:2110308
  • Position: Front right
  • Total length: 952 mm
  • Splines gearbox side: 28
  • Splines wheel side: 40
Item no.:2149848
  • Position: Front right
  • Total length: 952 mm
  • Splines gearbox side: 26
  • Splines wheel side: 40
Item no.:1199361
  • Position: Front left
  • Total length: 604 mm
  • Splines gearbox side: 26
  • Splines wheel side: 40
Item no.:1148817
  • Position: Front left
  • Total length: 594 mm
  • Splines gearbox side: 28
  • Splines wheel side: 40
Item no.:215182
  • Position: Front right
  • Total length: 947 mm
  • Splines gearbox side: 26
  • Splines wheel side: 36
Showing 1–24 of 61 products

Volvo S80 2.0 T Drivetrain Parts

The Volvo S80 2.0 T is a well-engineered saloon that combines comfort with performance from its turbocharged engine. To transfer this power to the road smoothly and without vibrations, a drivetrain in top condition is essential. The drivetrain on this specific model is dimensioned to handle the torque produced by the 2.0 T engine, placing exacting demands on material selection and manufacturing precision. At CVJoint24, you will find a carefully curated range tailored specifically to this vehicle configuration. We know Volvo drivers prize reliability and quality, which is why we only offer components that reliably stand the test of time.

Maintaining your drivetrain is not merely a matter of comfort; it is a vital safety priority. A worn drive shaft or a failing CV joint can, in the worst case, cause total breakdown while driving. By choosing the correct parts from a specialist, you ensure your Volvo S80 2.0 T preserves its composed road manners. Our selection covers everything from complete shafts to dedicated repair kits, making it simple to source the exact parts you need. With 23 verified items in our catalogue for this model, you can rely on our expertise to deliver the correct components.

How the drivetrain works on the Volvo S80 2.0 T

The drivetrain on the Volvo S80 2.0 T relies on a front-wheel-drive configuration where power transfers from the transversely mounted engine through a manual or automatic gearbox. The setup features two drive shafts—one for each front wheel—each fitted with two joints. The outer CV joint for the Volvo S80 2.0 T sits inside the wheel hub and allows the front wheels to steer while transferring driving torque. This joint endures severe stress, especially during full steering lock under acceleration, making it one of the most common wear items in the system.

The inner CV joint sits closest to the gearbox and accommodates the changes in length caused by the suspension travelling up and down. Running between these joints is the driveshaft bar, which must remain perfectly balanced to prevent vibrations. The entire assembly is shielded by rubber CV boots that retain lubricating grease while sealing out grit and moisture. On the Volvo S80 2.0 T, keeping these boots intact is critical, as even a tiny split quickly causes premature joint failure. A fully functional drivetrain is essential to maintaining the quiet, smooth ride characteristic of the S80 on long motorway journeys.

Common faults and symptoms

Several clear symptoms warn of drivetrain trouble on your Volvo S80 2.0 T. The most classic sign is a rhythmic clicking or knocking noise heard when turning sharply at low speed, such as when parking. This sound almost always points to a worn outer CV joint where the internal steel balls have developed excessive play. If you instead notice a dull thud or vibrations through the steering wheel under acceleration, it often indicates a damaged inner constant velocity joint on your Volvo S80 2.0 T or a bent drive shaft.

Another frequent issue on the Volvo S80 involves the ABS system. If the ABS warning light illuminates or the anti-lock system intervenes unexpectedly during gentle braking at low speeds, the cause is frequently a cracked ABS ring resulting from corrosion. This is a common fault on cars exposed to salted European roads in winter. You should also regularly inspect the inner wheel rims and wheel arches for flung grease, which is a telltale sign of a split CV boot. Catching these problems early saves substantial repair costs, as fitting a replacement CV joint boot is far more economical than replacing a destroyed joint or complete shaft later.

Common parts to replace on the Volvo S80 2.0 T

When servicing the drivetrain of your Volvo S80 2.0 T, certain components require attention more frequently than others. We organise our inventory around the exact requirements of this specific model variant. The most relevant product categories for your car include:

  • Drive shaft for Volvo S80 2.0 T – We supply 15 different versions to cover every combination of model year and gearbox type.
  • Outer CV joint for Volvo S80 2.0 T – With 6 distinct options, we ensure you obtain the correct joint with the matching spline count for your hub.
  • Inner CV joint for Volvo S80 2.0 T – A vital component for eliminating driveline shudder and vibration under load.
  • ABS ring for Volvo S80 2.0 T – A cost-effective solution to cure ABS sensor faults without replacing the entire drive shaft.

By offering these components individually, we help you complete targeted, cost-effective repairs. Instead of replacing entire assemblies that remain serviceable, you can replace solely the worn component. This is central to our philosophy as a specialist: providing the correct spare parts at competitive prices without compromising on quality. With 23 matched products, we provide exceptional coverage for your Volvo S80 2.0 T.

Find the right part for your Volvo S80 2.0 T

Navigate directly to the relevant component section for your Volvo S80 2.0 T:

When diagnosing drivetrain symptoms, selecting the appropriate category straight away makes sourcing easier. Comparing the specific subcategories for the Volvo S80 2.0 T helps you pinpoint whether your vehicle needs a drive shaft, CV joint or propeller shaft component, directing you to the parts matching your symptoms and specifications.

Selecting the correct spare parts for a Volvo S80 2.0 T calls for precision, as components differ between manual and automatic gearboxes, as well as across specific chassis numbers. The simplest and most reliable method is to filter by your car's exact make, model and engine variant. By selecting these details, our catalogue displays the verified parts tailored precisely to your vehicle. This eliminates guesswork and avoids the inconvenience of discovering an incorrect component once your car is already on the garage ramp.

If you need to verify fitment further, several technical dimensions are helpful to confirm. For CV joints, the internal and external spline tooth counts are the critical factors for proper engagement. For ABS reluctor rings, the precise number of teeth determines compatibility with your wheel speed sensors. At CVJoint24, we document these technical specifications clearly for every item. Should you require further guidance, our expert team is on hand to help you pick the right part first time. Accurate identification saves time and workshop hassle, giving you full confidence in your purchase.

Why buy from CVJoint24?

CVJoint24 is not simply another generic car parts retailer; we are the international shop of a Swedish driveline specialist shipping across the EU from our central warehouse in Helsingborg, Sweden. Driveline and power transmission components are our exclusive focus, giving us technical depth and inventory specialisation that few general suppliers can match. When sourcing parts for your Volvo S80 2.0 T from us, you can depend on durable components manufactured to rigorous standards.

Alongside technical knowledge, we provide responsive logistics designed for seamless maintenance. Fast dispatch helps minimise vehicle downtime in the workshop, getting your saloon back on the road without unnecessary delay. We maintain extensive stock on our shelves for immediate shipping. Choosing a dedicated specialist also gives you access to tailored technical support focused specifically on driveline systems. Trust CVJoint24 for expert service, quality components and the right parts at the right price every time.

Frequently asked questions about Drivetrain parts for Volvo S80 2.0 T

How do I know if my Volvo S80 2.0 T needs a new drive shaft?

The most common signs are pronounced vibrations during acceleration or grease leaks from the drive shaft boots. If the vibrations cease when you release the throttle, it is often the inner joint on the drive shaft that is worn.

Do all Volvo S80 CV joints fit the 2.0 T model?

No, there are variations depending on the engine variant and gearbox. The 2.0 T has specific spline counts and dimensions. Always select your car's exact make, model and engine to ensure the correct fitment.

What causes the clicking noise when I turn in my Volvo S80?

A clicking noise on full lock is almost always caused by a worn outer CV joint. It occurs when the balls inside the joint develop excessive play due to wear or lack of lubrication.

Can I replace just the ABS ring instead of the entire drive shaft?

Yes, on the Volvo S80 2.0 T it is often possible to replace only the ABS ring if it has cracked. This is a far more economical solution than replacing an otherwise functional drive shaft.

How quickly can my spare parts be delivered?

We dispatch in-stock items promptly across the EU. If you place your order in time, your parts are dispatched the same day so that you can get on with your repair as quickly as possible.

Are the boot and grease included when I buy a CV joint from you?

Yes, when you buy a CV joint kit for your Volvo S80 2.0 T from us, it normally includes the CV boot, grease, clamps and fitting hardware required to carry out a complete replacement.