BMW 2 Serie

Spare parts and drivetrain components for BMW 2 Serie.

Choose version

Choose a version to refine the results and get closer to the right product.

Products for BMW 2 Serie

756 products
217 - 240 of 756
Item no.:3577508
  • Position: Front, Outer
  • Inner splines: 26
  • Seal diameter: 56 mm
  • Outer splines: 31
  • Thread size: M16X1,5
Item no.:611531
  • Position: Rear
  • Splines gearbox side: 27
  • Splines wheel side: 31
  • Total length: 731 mm
Item no.:1198099
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 31
  • Total length: 541 mm
Item no.:2157595
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 31
  • Total length: 905 mm
Item no.:620868
  • Position: Rear
  • Total length: 1,335 mm
  • Outer diameter 1: 14 mm
  • Bolt circle diameter 1: 105 mm
Item no.:0673528
  • Total length: 107 mm
Item no.:0689103
  • Total length: 97 mm
Item no.:0925391
  • Inner diameter: 43 mm
  • Outer diameter: 90 mm
Item no.:0675867
  • Position: Rear
  • Total length: 124 mm
Item no.:0694345
  • Total length: 126 mm
Item no.:0910685
  • Diameter: 39 mm
Item no.:0699610
  • Total length: 98 mm
Item no.:0616771
  • Total length: 110 mm
Item no.:0955682
  • Inner diameter: 44 mm
  • Outer diameter: 67 mm
Item no.:691744
  • Position: Rear
Item no.:399285
  • Position: Front
Item no.:691145
  • Position: Rear
Item no.:1161203
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 31
  • Total length: 542 mm
Showing 217–240 of 756 products

Drivetrain for BMW 2 Serie

The BMW 2 Serie represents a unique breadth within the manufacturer's range, from sporty rear-wheel-drive coupés to practical front-wheel-drive family cars. This technical diversity places high demands on the precision and quality of replacement parts. The drivetrain is the heart of the car's power delivery, responsible for transferring torque from the engine to the wheels with minimal loss. For a BMW 2 Serie, it is essential that every drivetrain component, whether it is a drive shaft for BMW 2 Serie or a specific joint, meets a standard matching the car's original performance. Worn drivetrain components can quickly degrade the driving experience and cause consequential damage to other expensive parts.

As drivetrain specialists, we have built a comprehensive range tailored specifically for the BMW 2 Serie. We focus on supplying parts that not only fit physically, but also withstand the stresses imposed by modern engine technology and advanced chassis designs. By selecting the correct parts, you ensure that your car retains its dynamic handling characteristics. Our goal is to be the go-to partner for every BMW 2 Serie owner seeking expertise and quality when it comes to maintaining or repairing the transmission system.

How the BMW 2 Serie drivetrain is constructed

The layout of the BMW 2 Serie drivetrain varies significantly depending on your chosen body style and drive configuration. Rear-wheel-drive models use a traditional setup with a longitudinal engine, sending power through a gearbox to a propeller shaft for BMW 2 Serie, which in turn drives the rear axle. This layout requires robust centre bearings and universal joints to cope with the forces involved. Conversely, front-wheel-drive models in the 2 Series feature a transverse engine where power travels directly from the gearbox via drive shafts to the front wheels. This more compact layout places different demands on CV joint articulation angles and durability.

For models fitted with xDrive, BMW's intelligent all-wheel-drive system, the layout becomes even more complex. Here, power is distributed between the front and rear axles via a transfer case, meaning the car features both front and rear sets of driveshafts alongside a propeller shaft. Every component in this system must operate in perfect harmony for the xDrive system to regulate torque distribution optimally. Understanding these differences is crucial when ordering car parts, as a component designed for a front-wheel-drive model is rarely compatible with a rear-wheel-drive variant from the same series.

Common faults and symptoms

When the drivetrain on a BMW 2 Serie begins to wear, it often manifests through distinct mechanical symptoms. One of the most typical signs of a worn outer CV joint for BMW 2 Serie is a clicking or knocking noise heard when turning sharply at low speeds. This is frequently caused by a split CV boot, which allows road dirt to enter and grease to escape, leading to rapid wear of the internal joint components. If ignored, this noise can eventually result in complete joint failure, leaving the vehicle stranded with no drive.

Vibrations under acceleration are another common symptom, which can often be traced back to an inner CV joint for BMW 2 Serie or an unbalanced drive shaft. Unlike wheel imbalance, which is typically felt through the steering wheel at specific speeds, vibrations from an inner constant velocity joint are directly linked to engine load. On rear-wheel-drive models, vibrations can also originate from the prop shaft if its centre bearing or U-joints have worn out. It is important to act promptly upon noticing these symptoms to prevent unnecessary wear on the gearbox and differential.

Common parts to replace on the BMW 2 Serie

In our range for the BMW 2 Serie, you will find a wide selection of the most critical driveline components. We currently stock several different drive shafts for this model series, reflecting the extensive variation between different engine options and drive systems. A complete drive shaft is often the most cost-effective choice during major overhauls, as it provides both inner and outer joints alongside brand new CV boots in one assembly. This ensures lasting reliability and minimises the risk of recurring issues.

In addition to complete shafts, replacing individual constant velocity joints is very common. We stock multiple outer CV joints and inner variants specifically for the BMW 2 Serie. For models requiring power delivery to the rear axle, we also supply a variety of propeller shafts. Replacing a prop shaft may be necessary if you encounter persistent vibrations that cannot be resolved simply by rebalancing or replacing the centre bearing. By offering these dedicated categories, we ensure you can find the exact component required for your vehicle's specific configuration.

How to find the right part for your BMW 2 Serie

Select the relevant category for your BMW 2 Serie below:

On a model with multiple possible drivetrain issues, it pays to start in the correct section immediately. By comparing the exact component areas for the BMW 2 Serie, it becomes straightforward to distinguish between faults in a drive shaft, CV joint or propeller shaft, taking you directly to the parts that match your symptoms and fitment requirements.

If you are still unsure, our expert team is on hand to guide you in the right direction. We possess deep technical knowledge of BMW drivetrains and can assist in identifying the correct part based on your symptoms or technical vehicle specifications.

Why shop at cvjoint24.com

cvjoint24.com is not just another general spare parts supplier; we are a Swedish driveline specialist with a sharp focus on drivetrain and power transmission components. When purchasing parts for your BMW 2 Serie from us, you gain access to a range of outstanding depth and quality. We understand the technical nuances of BMW engineering and curate our product catalogue accordingly. Our specialist expertise ensures peace of mind and advice that general motor factors often struggle to provide.

We combine this specialised know-how with a modern e-commerce experience, ensuring prompt EU-wide dispatch from our Swedish warehouse and accurate fitment. By selecting your car's make, model and engine variant, you eliminate the risk of purchasing the wrong part and facing costly returns. We take pride in delivering premium car parts that extend the life of your vehicle and maintain its peak driving performance. When you choose cvjoint24.com, you partner with dedicated driveline specialists ready to support you from diagnosis right through to the delivery of the correct spare part.

Frequently Asked Questions about Drivetrain Parts for BMW 2 Series – Spare Parts with a Perfect Fit

How do I know if my BMW 2 Series needs a new drive shaft?

The most common signs are vibrations through the car under acceleration or unusual noises while driving. If you notice that the vibrations disappear when you ease off the throttle, it is often a worn inner CV joint or the drive shaft itself.

Does the same CV joint fit all BMW 2 Series models?

No, there are substantial differences between front-wheel drive models (such as the Active Tourer) and rear-wheel drive models (such as the Coupé). Always select your car's make, model and engine to find the exact replacement part for your specific vehicle.

What causes a clicking noise when turning in my BMW 2 Series?

A clicking noise on full steering lock is almost always caused by a worn outer CV joint. This is frequently the result of a split CV boot that has allowed dirt and moisture to penetrate the joint.

Do you stock propeller shafts for the BMW 2 Series with xDrive?

Yes, we stock a wide range of propeller shafts suitable for both rear-wheel drive models and those equipped with xDrive four-wheel drive.

Can I replace just the CV joint, or do I need to replace the complete drive shaft?

On many BMW 2 Series models, it is possible to replace just the outer or inner CV joint. However, if the shaft has sustained further damage or labour costs are high, replacing the complete drive shaft assembly is often more economical.

Why does my car vibrate at higher speeds despite having balanced wheels?

If balancing the wheels does not resolve the issue, the vibrations may stem from an unbalanced prop shaft or worn joints in the drivetrain. This is a common symptom indicating that a driveline component requires attention.