Outer CV joints for Peugeot

Find the right outer CV joint for your Peugeot by selecting your make, model and engine variant. With extensive coverage for over 500 vehicle versions—from 1980s classics to modern...

Choose model

Choose a model to move to more precise products and the next step in the vehicle tree.

Products for Outer CV joints for Peugeot

838 products
121 - 144 of 838
Item no.:0528055
  • Position: Outer
  • Inner splines: 35
  • Splines wheel side: 28
  • Outer diameter: 87 mm
Item no.:357987
  • Position: Front, Outer
  • Inner splines: 24
  • Splines wheel side: 25
  • Seal diameter: 56 mm
  • Thread size: M24X1,5
Item no.:359701
  • Position: Front, Outer
  • Inner splines: 34
  • Seal diameter: 58 mm
  • Outer splines: 25
  • ABS teeth: 29
Item no.:151875
  • Position: Front left, Outer
  • Inner splines: 39
  • Splines wheel side: 27
  • Seal diameter: 61,3 mm
  • Thread size: M24X1,5
Item no.:3568788
  • Position: Front, Outer
  • Inner splines: 22
  • Seal diameter: 60 mm
  • Outer splines: 25
  • ABS teeth: 48
Item no.:3597391
  • Position: Outer
  • Inner splines: 34
  • Seal diameter: 59 mm
  • Outer splines: 25
  • ABS teeth: 29
Item no.:358384
  • Position: Outer
  • Inner splines: 34
  • Splines wheel side: 25
  • Seal diameter: 58 mm
  • Splines gearbox side: 24
Item no.:255339
  • Position: Outer
  • Inner splines: 29
  • Seal diameter: 49 mm
  • Outer splines: 21
  • Thread size: 21
Item no.:6551788
  • Position: Outer
  • Inner splines: 21
  • Splines wheel side: 28
  • Outer diameter: 75 mm
Item no.:0533691
  • Position: Outer
  • Inner splines: 23
  • Splines wheel side: 28
  • Outer diameter: 77 mm
Item no.:0529831
  • Position: Outer
  • Inner splines: 21
  • Splines wheel side: 24
  • Outer diameter: 75 mm
Item no.:0517125
  • Position: Outer
  • Inner splines: 28
  • Splines wheel side: 27
  • Outer diameter: 92 mm
Item no.:0529039
  • Position: Outer
  • Inner splines: 21
  • Splines wheel side: 21
  • Outer diameter: 75 mm
  • Outer splines: 21
Item no.:6580662
  • Position: Outer
  • Inner splines: 20
  • Splines wheel side: 21
  • Outer diameter: 72,4 mm
  • Outer splines: 21
Item no.:3592343
  • Position: Front, Outer
  • Inner splines: 21
  • Seal diameter: 49,5 mm
  • Outer splines: 24
  • Thread size: M22X1,5
Item no.:358448
  • Position: Front, Outer
  • Inner splines: 20
  • Splines wheel side: 24
  • Seal diameter: 49,5 mm
  • Thread size: M22X1,5
Item no.:359829
  • Position: Front, Outer
  • Inner splines: 30
  • Seal diameter: 58,5 mm
  • Outer splines: 25
  • Thread size: M24X1,5
Item no.:157611
  • Position: Front left, Outer
  • Inner splines: 36
  • Outer splines: 28
Item no.:3523046
  • Position: Front, Outer
  • Inner splines: 34
  • Seal diameter: 58,5 mm
  • Outer splines: 25
  • ABS teeth: 29
Item no.:354928
  • Position: Front, Outer
  • Inner splines: 22
  • Splines wheel side: 25
  • Seal diameter: 58,5 mm
  • Thread size: M24X1,5
Item no.:359140
  • Position: Front, Outer
  • Inner splines: 27
  • Splines wheel side: 21
  • Seal diameter: 49 mm
  • Thread size: M20X1,5
Item no.:354740
  • Position: Front, Outer
  • Inner splines: 20
  • Splines wheel side: 24
  • Seal diameter: 49,5 mm
  • Thread size: M22X1,5
Item no.:359118
  • Position: Front, Outer
  • Inner splines: 21
  • Splines wheel side: 21
  • Seal diameter: 49 mm
  • Thread size: M20X1,5
Item no.:3508049
  • Position: Front, Outer
  • Inner splines: 36
  • Splines wheel side: 28
  • Seal diameter: 58,5 mm
  • Outer diameter: 91 mm
Showing 121–144 of 838 products

Outer CV joints for Peugeot

The outer CV joint is one of the most vital components in your Peugeot's drivetrain. Its primary role is to transfer torque from the drive shaft to the front wheels while allowing them to steer and move vertically over road imperfections. For Peugeot, historically a pioneer in front-wheel-drive design, the quality of these components is crucial for driving dynamics and vehicle safety. At CVJoint24, you will find an extensive, specialist range engineered specifically for this marque. We understand that a Peugeot is more than just transport; it is a machine that demands precision throughout every link of its drivetrain.

With a comprehensive inventory in stock, we cover virtually every conceivable configuration, from early classic models to the latest SUVs. Whether you drive an older supermini or a modern minibus, the outer CV joint withstands immense stress, especially in demanding European climates with road salt, moisture and extreme temperatures. Choosing a vehicle-specific component ensures smooth power transmission without losses whilst preserving the car's steering geometry. Our focus is on supplying parts that match original specifications to deliver durable, trouble-free motoring.

How outer CV joints differ across Peugeot models

Peugeot features a broad model range spanning nimble city hatchbacks to large commercial vehicles, which is reflected in the wide variety of outer CV joints required. An outer CV joint for a Peugeot 206 is engineered for a lightweight car where agility is paramount, whereas a component for a Peugeot Boxer van must endure significantly greater torque and heavy payloads. Differences often lie in the spline count on both the inner and outer sections of the joint, as well as the diameter of the sealing surface. It is common for the same model year to feature different joint variants depending on engine capacity or gearbox type.

Design also varies depending on whether the vehicle is equipped with ABS, as many older Peugeot models utilise an integrated ABS ring for Peugeot fitted directly onto the CV joint. You will also find variations between petrol and diesel models in the same series, as the higher torque of diesel engines frequently requires stronger constant velocity joints and thicker drive shafts. Understanding these nuances is our core strength as specialists. We make sure you receive a part that does not merely fit physically, but is technically correct for your exact engine and gearbox combination to prevent premature wear and vibration.

Common symptoms of wear

Identifying a failing outer CV joint early can save you from costly secondary damage across the drivetrain. The classic symptom of a worn outer CV joint is a rhythmic clicking or knocking noise when cornering, particularly when accelerating at lower speeds. This noise occurs when the joint's internal ball bearings wear depressions into the races due to friction or lubrication failure. Another common indicator is vibration through the steering wheel that intensifies with vehicle speed, often revealing radial play in the joint that throws the wheel assembly off balance.

You should also inspect the CV boot regularly. If the boot is split, cracked or loose, road dirt and water penetrate the joint while essential grease is thrown out. Without proper lubrication, the joint will fail rapidly. Spotting grease flung across the inside of the wheel rim or wheel arch is a clear sign that the boot has torn. Ignoring these warnings can ultimately lead to the CV joint seizing or shearing completely, leaving you stranded and potentially damaging your Peugeot drive shaft. Early detection keeps repair costs down.

Choosing the right outer CV joint for Peugeot

Finding the correct replacement part for a French car can occasionally prove challenging due to minor engineering updates throughout a model's production run. To ensure you purchase the correct outer CV joint for your Peugeot, we recommend selecting your exact make, model and engine variant using our vehicle selector. This instantly filters out incompatible parts and displays only the components that match your specific vehicle. However, keeping a few key technical details in mind will help you double-check your selection.

Check whether your vehicle has ABS and if the sensor reads from a reluctor ring on the CV joint itself or via an integrated wheel bearing sensor. Where possible, counting the splines on your existing joint remains the most reliable way to confirm compatibility. We always list both external and internal spline counts in our product descriptions to make this straightforward. It is equally important to check whether the joint comes as a complete kit. At CVJoint24, our outer CV joints are supplied as standard with a high-grade CV boot, the correct volume of specialised grease, stainless-steel clamps and necessary circlips to ensure installation matches manufacturer standards.

Popular Peugeot models to explore

Select your Peugeot model to view outer CV joints:

With such a vast selection available, navigating by model is the easiest way to proceed. Choosing your specific car displays components filtered for exact fitment, drivetrain configuration and technical compatibility.

Clicking through to your model brings up a focused catalogue of parts engineered specifically for your vehicle. We also cover ranges including the Peugeot 208, 405 and the heavy-duty Boxer, making CVJoint24 your dependable partner for drivetrain components across all generations and body styles.

Why shop at CVJoint24

When you choose CVJoint24, you rely on a Swedish driveline specialist dedicated to drivetrain and transmission systems. We know that correct fitment is vital for mechanical assemblies, which is why we provide a reliable fitment guarantee on all our products. Our goal is to help you select the exact part first time, avoiding frustrating returns or workshop delays. With extensive inventory dedicated to Peugeot, our vehicle coverage is among the finest available.

We recognise the importance of getting your car back on the road quickly, which is why our central warehouse in Helsingborg, Sweden operates efficient logistics dispatching across the European Union. As a dedicated driveline specialist, we have earned trust by consistently prioritising manufacturing quality and technical accuracy. Shopping with a focused supplier gives you access to deeper technical knowledge and a more comprehensive product range than generic car-part retailers. We supply quality components built to endure demanding European road conditions so your Peugeot keeps running smoothly for many kilometres to come.

Frequently asked questions about outer CV joints for Peugeot

What is the function of an outer CV joint on my Peugeot?

The outer CV joint is located at the wheel and its role is to transfer power from the drive shaft to the wheel while allowing the wheel to steer and move up and down with the suspension.

How do I know if the outer CV joint on my Peugeot is failing?

The most common symptom is a clicking or knocking noise when turning, especially during acceleration. Steering-wheel vibrations and grease splattered across the wheel rim from a split CV boot are also clear warning signs.

Can I replace just the CV boot if the joint is still working?

Yes, if you discover a split CV boot early before dirt and moisture have damaged the constant velocity joint itself, you can save money by replacing only the boot and repacking it with fresh grease.

Do all Peugeot CV joints fit across all models?

No, CV joints vary significantly depending on the model, engine size, gearbox type, and whether the vehicle has ABS. Always select your Peugeot's model, year and engine variant to find the exact matching part.

Why is there a clicking noise when I turn in my Peugeot?

The clicking noise is typically caused by the steel balls inside the outer CV joint wearing grooves into the joint housing, which creates play that rattles whenever the joint operates at an angle.

Are grease and fitting accessories included when I buy an outer CV joint from you?

Yes, our outer CV joints are almost always supplied as complete kits containing the CV joint, CV boot, specialist grease, boot clamps, and any necessary circlips for a straightforward replacement.