Audi

Spare parts and drivetrain components for Audi.

Choose model

Choose a model to move to more precise products and the next step in the vehicle tree.

Products for Audi

21,529 products
1249 - 1272 of 21529
Item no.:519192
  • Position: Rear right
  • Splines wheel side: 42
  • Total length: 489 mm
Item no.:417748
  • Position: Rear left
  • Splines wheel side: 42
  • Total length: 553 mm
Item no.:0890977
  • Inner diameter: 30 mm
  • Width: 15 mm
Item no.:0216661
  • Total length: 1,856 mm
  • Number of joints: 3
  • Outer diameter 1: 90 mm
  • Outer diameter 2: 99,73 mm
  • Bolt circle diameter 2: 86 mm
Item no.:622399
  • Position: Rear
  • Total length: 2,176 mm
  • Number of joints: 1
  • Outer diameter 1: 16 mm
  • Bolt circle diameter 1: 105 mm
Item no.:2103554
  • Position: Front right
  • Splines wheel side: 38
  • Total length: 475 mm
  • Joint diameter: 100 mm
  • Joint diameter, gearbox side: 123 mm
Item no.:0885683
  • Inner diameter: 30 mm
Item no.:2178577
  • Splines wheel side: 38
  • Total length: 640 mm
  • Joint diameter: 88 mm
  • Joint diameter, gearbox side: 100 mm
  • ABS teeth: 45
Item no.:115352
  • Position: Front left
  • Splines wheel side: 38
  • Total length: 615 mm
  • Joint diameter: 100 mm
  • Joint diameter, gearbox side: 123 mm
Item no.:2120625
  • Position: Front right
  • Splines wheel side: 38
  • Total length: 500 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:622542
  • Total length: 1,900 mm
  • Number of joints: 2
  • Outer diameter 1: 99,7 mm
  • Bolt circle diameter 1: 86 mm
  • Outer diameter 2: 99,7 mm
Item no.:2190264
  • Position: Front right
  • Splines wheel side: 38
  • Total length: 466 mm
  • Joint diameter: 100 mm
  • Flange diameter: 123 mm
Item no.:0645197
  • Total length: 111 mm
Item no.:629517
  • Position: Rear
  • Total length: 1,505 mm
  • Outer diameter 1: 99,7 mm
  • Bolt circle diameter 1: 86 mm
Item no.:115183
  • Splines wheel side: 36
  • Total length: 500 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 110 mm
  • Flange diameter: 110 mm
Item no.:2157840
  • Position: Front right
  • Splines gearbox side: 33
  • Splines wheel side: 36
  • Total length: 907 mm
  • Joint diameter: 90 mm
Item no.:1141410
  • Position: Front left
  • Splines wheel side: 36
  • Total length: 492 mm
  • Flange diameter: 110 mm
Item no.:622137
  • Total length: 1,562 mm
  • Number of joints: 3
  • Outer diameter 1: 32,12 mm
  • Outer diameter 2: 30,12 mm
  • Number of centre bearings: 1
Item no.:1168029
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 36
  • Total length: 560 mm
Item no.:621853
  • Position: Rear
  • Total length: 2,243 mm
Item no.:116676
  • Position: Front left
  • Splines wheel side: 22
  • Total length: 515 mm
  • Joint diameter: 81 mm
  • Joint diameter, gearbox side: 92 mm
Item no.:113359
  • Position: Front left
  • Splines gearbox side: 92
  • Splines wheel side: 20
  • Total length: 480 mm
  • Joint diameter: 77 mm
Showing 1249–1272 of 21529 products

Drivetrain for Audi

Audi has long been synonymous with technical innovation and high-performance power delivery, not least through its pioneering Quattro system. The drivetrain in an Audi is a complex assembly responsible for transferring the engine's power to the wheels with minimal loss and maximum precision. At CVJoint24, we are specialists in precisely these components. We provide everything from complete drive shafts to dedicated repair kits for CV joints and ABS rings. Our range covers everything from older classics such as the Audi 80 and 100 to modern performance cars and Q-series SUVs. Maintaining the drivetrain is vital for your vehicle's lifespan and safety, as worn components not only reduce ride comfort but can also cause costly consequential damage to the gearbox and differentials.

When you select parts for your Audi from us, you get access to components carefully chosen to meet the high standards demanded by German premium vehicles. We stock a broad range of drive shafts for Audi designed to withstand the torque and loads encountered in both city driving and at motorway speeds. By focusing on specialist drivetrain knowledge, we offer solutions that regularly outperform generic alternatives in both durability and fit, which is essential to preserve the original driving feel of your Audi.

How the drivetrain differs between Audi models

Audi uses several different drivetrain architectures, making it essential to select the correct spare part. Smaller models like the Audi A1 and Audi A3 frequently rely on transverse engines, requiring a specific configuration of drive shafts and inner joints. In these, Haldex-based all-wheel drive systems are common, distributing power electronically. Larger models like the Audi A4, A6, and A8 use longitudinal engines instead, which typically features a permanent Quattro system with a Torsen differential or crown-gear centre differential. This difference in design influences everything from the length of an inner CV joint for Audi to the layout and mounting of the propeller shaft.

It is also important to note that Audi often uses different spline counts and dimensions depending on the engine option and gearbox type (manual, Tiptronic, or S-tronic). An Audi A4 Avant with a powerful TDI engine may feature significantly heavier-duty drive shafts than an entry-level petrol model, even within the same model year. Therefore, checking technical specifications rather than relying solely on the model name is critical. At CVJoint24, we have structured our data to address these nuances, making it simple to find the right outer CV joint for Audi that fits the wheel hub of your specific vehicle exactly.

Common faults and symptoms

Drivetrain wear on an Audi often manifests through distinct mechanical symptoms. One of the most common signs of a failing outer CV joint is a clicking or knocking noise heard when turning sharply at low speeds, such as during parking. If you experience vibrations during acceleration, especially at higher speeds, it frequently indicates that an inner CV joint is worn or has lost its lubrication. For Audi owners with Quattro systems, vibrations from the centre of the car can also point to issues with the propeller shaft centre bearing or universal joints. Acting quickly on these symptoms is essential to prevent a drive shaft from failing completely and leaving you stranded.

Another common issue, particularly on models such as the Audi A4 and A6 from the early 2000s, is cracked ABS rings. This often causes the ABS system to intervene unnecessarily at low speeds or triggers the ABS warning light. We supply specific ABS rings for Audi that can be replaced separately, saving you money compared to replacing the complete CV joint. Furthermore, CV boots should be inspected regularly; a split boot allows dirt and moisture in while grease is slung out, rapidly ruining even the sturdiest constant velocity joint. Catching a leak early often means a simple boot replacement will suffice instead of an expensive repair.

Popular Audi models to explore

Continue to the right model or relevant component section for Audi:

On a broad brand page, the priority is finding the correct combination of model and component section quickly. By starting with one of the most common model or category links for Audi, you can easily navigate to a page offering a more precise fit and direct product relevance.

How to find the right part for your Audi

Identifying the correct drivetrain component for an Audi can be challenging due to the numerous technical revisions made across a model's production run. The best way to begin is by selecting your car's exact make, model and engine variant in our store. This filters the selection down to components that are technically compatible with your specific engine and gearbox configuration. It reduces the risk of ordering the wrong part and ensures you receive components with the correct length, matching spline counts, and proper fitment to the gearbox and wheel hub.

If you are unsure about a specific part, we recommend checking the original part number (OEM number) on the component currently fitted to the car, whenever possible. Many of our products display reference numbers to make comparison straightforward. Keep in mind that details like the chassis number can be decisive around mid-year production breaks. Our customer support team and technical guides are always on hand to help you navigate these details. Taking a moment to verify fitment before ordering saves both time and money in the garage later.

Why shop with CVJoint24

CVJoint24 is no ordinary car parts retailer; we are the international store of a Swedish driveline specialist, focused solely on driveline and power transmission components. Our business is built on offering specialist expertise that general auto factors often lack. When you buy from us, you receive parts selected for their premium quality and precise fitment—critical for Audi models where tolerances are exceptionally tight. We understand the technical nuances of Quattro systems and complex driveshafts, and we maintain an inventory tailored to the demands of European roads.

With a comprehensive product catalogue specifically for Audi and logistics set up for reliable dispatch across the EU from our Swedish central warehouse, we are the trusted choice for DIY mechanics and professional garages alike. We combine broad inventory availability with genuine specialist know-how. Partner with CVJoint24 to keep your Audi running at its best year after year. Reliability, technical expertise, and top-tier product quality are the reasons our customers return to us for all their drivetrain needs.

Frequently Asked Questions about Drivetrains for Audi – Power Transmission Spare Parts

How do I know if my Audi needs a new outer CV joint?

The most common symptom is a clicking or knocking noise when cornering, especially on full lock at low speeds. If the noise disappears when driving straight ahead, it is almost certainly a worn outer CV joint.

Does the same drive shaft fit all Audi A4 models?

No, drive shafts vary depending on the generation (e.g. B7, B8, B9), engine type, gearbox, and whether the car has Quattro four-wheel drive or front-wheel drive. Always select your specific make, model and engine to find the correct shaft.

Why does my Audi vibrate under acceleration?

Vibrations under load are often caused by wear in the inner CV joints. If the vibration stops as soon as you lift off the accelerator, this is a strong indication that an inner constant velocity joint needs replacing.

Can I replace just the ABS ring on my Audi?

Yes, on many Audi models the ABS ring is mounted onto the CV joint and can be replaced separately if it has cracked or corroded, making it a cost-effective alternative to replacing the entire joint.

What is the difference between drive shafts for Quattro and front-wheel-drive models?

Quattro models have drive shafts both front and rear, and the front driveshafts often differ in length and design compared to front-wheel-drive models due to the layout and position of the differential.

How often should I inspect the CV boots on my Audi?

We recommend checking them at every service or seasonal tyre change. A split CV boot quickly allows road dirt to ruin the CV joint, so catching a tear early can save you substantial repair costs.

Do you sell complete drive shafts for Audi or only individual joints?

We supply both. For many models, fitting a complete drive shaft is the quickest and most straightforward option, whereas in other cases it is more economical to replace only the worn CV joint using one of our complete repair kits.