BMW 3 Serie

Spare parts and drivetrain components for BMW 3 Serie.

Choose version

Choose a version to refine the results and get closer to the right product.

Products for BMW 3 Serie

4,494 products
1153 - 1176 of 4494
Item no.:5197063
  • Position: Rear right
  • Splines wheel side: 30
  • Total length: 680 mm
  • Joint diameter: 88 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:0211549
  • Inner diameter: 30 mm
  • Bearing thickness: 36 mm
  • Hole spacing c/c: 160 mm
  • Height: 54 mm
Item no.:0397982
  • ABS teeth: 48
  • Inner diameter: 79 mm
  • Outer diameter: 82 mm
  • Width: 12 mm
Item no.:6184106
  • Position: Rear
  • Splines wheel side: 27
  • Total length: 614 mm
  • Joint diameter: 94 mm
  • ABS teeth: 48
Item no.:5108401
  • Position: Rear right
  • Splines wheel side: 27
  • Total length: 668 mm
  • Joint diameter: 88 mm
  • ABS teeth: 48
Item no.:350794
  • Position: Front, Outer
  • Inner splines: 33
  • Seal diameter: 64,8 mm
  • Outer splines: 30
  • ABS teeth: 48
Item no.:0340397
  • ABS teeth: 48
  • Inner diameter: 79 mm
  • Outer diameter: 83 mm
  • Width: 12 mm
Item no.:6124192
  • Position: Rear
  • Splines wheel side: 27
  • Total length: 625 mm
  • Joint diameter: 86 mm
  • ABS teeth: 48
Item no.:5138697
  • Position: Rear right
  • Splines wheel side: 27
  • Total length: 675 mm
  • Joint diameter: 86 mm
  • ABS teeth: 48
Item no.:0242745
  • Diameter: 30 mm
  • Bearing thickness: 35 mm
  • Hole spacing c/c: 160 mm
Item no.:456881
  • Position: Rear, Outer
  • Inner splines: 28
  • Splines wheel side: 30
  • Total length: 133 mm
Item no.:1113199
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 571 mm
  • ABS teeth: 48
Item no.:2185389
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 892 mm
  • ABS teeth: 48
Item no.:0280615
  • Position: Front
  • Total length: 738 mm
  • Number of joints: 2
  • Outer diameter 1: 47 mm
  • Bolt circle diameter 1: 77 mm
Item no.:249797
  • Position: Front right, Inner
  • Inner splines: 24
  • Seal diameter: 44 mm
  • Total length: 500 mm
  • Outer splines: 27
Item no.:625201
  • Position: Rear
  • Total length: 1,256 mm
Item no.:7302489
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 890 mm
  • ABS teeth: 49
Item no.:6129225
  • Position: Rear
  • Splines wheel side: 27
  • Total length: 574 mm
  • Joint diameter: 86 mm
  • ABS teeth: 48
Item no.:0213643
  • Diameter: 30 mm
  • Bearing thickness: 35 mm
  • Hole spacing c/c: 132 mm
Item no.:612734
  • Position: Rear
  • Splines wheel side: 27
  • Total length: 575 mm
  • Joint diameter: 86 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:7301500
  • Position: Rear
  • Splines wheel side: 27
  • Total length: 578 mm
  • Joint diameter: 94 mm
  • Joint diameter, gearbox side: 94 mm
Item no.:4160676
  • Position: Rear left
  • Splines wheel side: 27
  • Total length: 612 mm
  • Joint diameter: 86 mm
  • ABS teeth: 48
Item no.:5155052
  • Position: Rear right
  • Splines wheel side: 27
  • Total length: 664 mm
  • Joint diameter: 86 mm
  • ABS teeth: 48
Showing 1153–1176 of 4494 products

Drivetrain for BMW 3 Serie

For decades, the BMW 3 Serie has been synonymous with driving pleasure and engineering precision. Maintaining this dynamic feel requires a drivetrain in first-class condition. The drivetrain is responsible for transferring engine power to the driven wheels, and in a car engineered for such high performance, these components are subjected to significant stress. At CVJoint24, we are specialists in these exact components and offer one of the market's deepest ranges for this specific model line. Our extensive stock covers everything from the earliest generations to the very latest models.

Maintaining the drivetrain is not only a matter of driving comfort, but crucially one of safety. A worn CV joint or an unbalanced propeller shaft can cause consequential damage to the gearbox and differential if not rectified in time. By choosing the right spare parts tailored to your BMW 3 Serie, you ensure that power delivery remains efficient and free from unwanted vibrations or noises. Our focus is on supplying components that meet or exceed original equipment specifications, giving you a dependable, long-term solution for your vehicle.

How the drivetrain is engineered on the BMW 3 Serie

The drivetrain layout of the BMW 3 Serie is renowned for its balanced architecture. Traditionally, the model relies on a longitudinally mounted engine with rear-wheel drive, meaning power travels from the gearbox via a propeller shaft to the rear differential. From there, torque is distributed to the road wheels through the drive shafts. On models equipped with the xDrive all-wheel-drive system, a transfer box and a front prop shaft are added to power the front wheels via a front differential and front drive shafts. This complexity demands that every single component operates in complete harmony.

Each part in this assembly serves a defined purpose. The propeller shaft must be dynamically balanced to eliminate high-speed vibrations, while the drive shafts must accommodate both suspension travel and steering articulation (on the front axle of xDrive models). The CV joints—both inner and outer—provide this flexibility while delivering constant torque. On the BMW 3 Serie, the mechanical precision of these components is vital for preserving the sharp steering response and stability that define the marque. Understanding this layout is essential when diagnosing where a driveline fault has developed.

Common faults and symptoms

There are several clear warning signs indicating that a component within your BMW 3 Serie drivetrain is failing. One of the most frequent symptoms is a clicking or knocking sound on full steering lock at low speeds. This typically points to a worn outer CV joint or a split CV boot that has allowed road grit to enter. If you instead experience distinct vibrations throughout the chassis during acceleration, this often indicates wear or excessive play in an inner CV joint, or a bent drive shaft.

On rear-wheel-drive and all-wheel-drive models, vibrations felt through the floor pan or seats—rather than through the steering wheel—are frequently traced to the propeller shaft or its centre bearing. A whining or droning noise from underneath the car can also point to worn universal joints or loss of prop shaft balance. Another common issue, particularly on older generations of the 3 Series, is an illuminated ABS warning light or erratic ABS activation during light braking. This is typically caused by a cracked or corroded ABS ring disrupting the wheel speed sensor signal. Overlooking these symptoms can result in costly consequential damage and compromised road safety.

Common replacement parts for the BMW 3 Serie

Within our inventory for the BMW 3 Serie, certain components naturally see higher demand due to typical mileage and environmental wear. Propeller shafts represent one of our primary categories, reflecting the importance of this assembly in BMW's chassis architecture. Drive shafts are equally sought after, and we stock numerous variants to cover the wide variety of engines and drivetrains. The most frequently serviced categories include:

  • Propeller shaft BMW 3 Serie – Essential for smooth power delivery to the rear axle.
  • Drive shaft BMW 3 Serie – Complete shaft assemblies for front and rear fitment.
  • ABS ring BMW 3 Serie – Vital for correct wheel speed sensing and braking safety.
  • Inner CV joint BMW 3 Serie – A frequent culprit behind vibration under acceleration.
  • Outer CV joint BMW 3 Serie – The primary source of clicking noises during tight turns.

Deciding on a repair often comes down to replacing a complete unit, such as an entire drive shaft assembly, or rebuilding the existing shaft with a new constant velocity joint. For many BMW owners tackling driveline vibrations, a complete replacement propeller shaft is the most dependable, cost-effective solution, ensuring balanced, vibration-free operation straight out of the box.

How to find the right part for your BMW 3 Serie

Navigate directly to the appropriate section for your BMW 3 Serie:

With multiple drivetrain configurations across the range, selecting the correct category first simplifies your repair. Comparing the exact component categories for the BMW 3 Serie makes it straightforward to distinguish between drive shaft, CV joint or propeller shaft issues, leading you to the part that precisely matches your car's symptoms and fitment.

Locating the correct component for your BMW 3 Serie can appear daunting given the extensive variations across generations, engine types and specifications. A manual 320d frequently uses different drive shaft dimensions compared to an automatic 335i, and components differ substantially between standard rear-wheel-drive cars and xDrive models. To make selection straightforward, our catalogue allows you to filter parts precisely by your vehicle's make, model and engine variant.

Selecting your specific car filters down to the parts verified for your exact configuration. We always advise checking key technical details before ordering—such as overall shaft length, ABS ring tooth count or mounting flange dimensions—as running production changes occasionally occurred mid-model-year. Combining our model data with your car's specific details guarantees an accurate match and gets your repair completed without delays. If you are uncertain whether you require an inner joint, an outer joint or a complete driveshaft assembly, our driveline specialists are on hand to advise you.

Why buy from CVJoint24

CVJoint24 is the international online shop of a dedicated Swedish driveline specialist, operating from our central warehouse in Helsingborg, Sweden, and delivering to customers across the European Union. For BMW 3 Serie drivers, this means access to dedicated technical knowledge and a specialised inventory that general factors simply cannot match. We understand the precise engineering requirements of the BMW chassis and curate our catalogue to provide exceptional quality and reliability. With comprehensive coverage for the 3 Series, we supply the hard-to-find driveline parts other retailers cannot provide.

Our specialist focus ensures accurate fitment data and knowledgeable support for DIY mechanics and professional garages alike. When your car is on the ramp, fast EU delivery and receiving the correct part the first time are critical. By concentrating solely on the drivetrain, we maintain higher data accuracy and provide complete buying confidence. When you order from CVJoint24, you partner with dedicated driveline experts committed to keeping your BMW 3 Serie performing as the ultimate driving machine.

Frequently Asked Questions about Drivetrain for BMW 3 Series - Spare Parts & Components

Why does my BMW 3 Series vibrate under hard acceleration?

Vibrations during acceleration are often caused by internal play in an inner CV joint. On the BMW 3 Series, this is a common symptom when the joint has worn out, preventing the shaft from centring properly under load.

How do I know whether to replace the entire drive shaft or just the CV joint?

If the shaft itself is straight and the splines are undamaged, replacing just the CV joint may be sufficient. However, if the shaft has rust damage underneath the boot or multiple joints are worn, replacing it with a complete drive shaft is often more cost-effective and dependable.

Does the same propeller shaft fit all BMW 3 Series models?

No, the propeller shaft varies depending on the engine, gearbox (manual/automatic), and whether the car has xDrive or rear-wheel drive. It is therefore crucial to select your exact model and engine to ensure the correct length and flange design.

My ABS warning light is on in my BMW 3 Series; could this be caused by the drivetrain?

Yes, it is very common for the ABS ring on the drive shaft to corrode or crack. This leads to faulty sensor readings, triggering the warning light. We supply replacement ABS rings so you can avoid replacing the entire shaft.

What is the difference between drive shafts for xDrive and rear-wheel drive?

Rear-wheel-drive models only feature rear drive shafts. xDrive models also have front drive shafts designed to manage both drive torque and steering angles, making them similar to the shafts found on front-wheel-drive cars.

What are the most common signs of a failing propeller shaft?

The most common symptoms are vibrations that increase with vehicle speed, a clunking noise when accelerating, or a whining sound from the centre bearing. Propeller shaft imbalance can often be felt throughout the entire body of the car.

How often should the drive shaft boots be inspected?

We recommend inspecting them at every service or seasonal wheel change. A split CV boot quickly leads to grease loss and dirt ingress, which will destroy the CV joint in very short order.